856338_15 TRIQUINT | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

Features

  • For Wireless LAN applications
  • Usable bandwidth 9 MHz
  • High attenuation
  • Single-ended operation
  • Ceramic Surface Mount Package (SMP)
  • Hermetic
  • RoHS compliant (2002/95/EC), Pb-free Package Pin Configuration Surface Mount 9.10 x 4.80 x 1.24 mm Bottom View 8 7 6 321 Pin No. Description

4 RF Output

9 RF Input

1,2,3,5 Case Ground 6,7,8,10 Case Ground 9.10 0.69 2.54 1.000.80 2.54 4.80 1.50 1.24 NOM. 1.35 MAX. Dimensions shown are nominal in millimeters All tolerances are ±0.15mm except overall length and width +0.10mm/-0.10mm Body: Al2O3 ceramic Lid: Kovar, Ni plated Terminations: Au plating 0.5 - 1.0µm, over a 2 - 6µm Ni plating Pb Subject to change or obsolescence without notice Rev B 12-Apr-2006 Page 1 of 5

970 MHz SAW Filter

Electrical Specifications (1) Operating Temperature Range: (2) -40 to +85 oC Parameter (3) Minimum Typical Maximum Unit Center Frequency (4) 969.20 970.06 970.80 MHz Maximum Insertion Loss at 970 MHz - 24 27 dB Lower 3 dB Bandedge (5) Upper 3 dB Bandedge 974.5 964.4 975.3 965.5 MHz MHz Lower 35 dB Bandedge (5) Upper 35 dB Bandedge 961.5 963.0 977.4 978.5 MHz MHz Passband Ripple (over 3 dB bandwidth) - 0.41 1.0 dB p-p Passband Ripple (over any 300 kHz bandwidth) - 0.23 0.3 dB p-p Passband Amplitude Tilt - 0.22 1.0 dB Phase Ripple (over 3 dB bandwidth) - 4.3 8.0 deg Phase Ripple (over any 300 kHz bandwidth) - 0.5 3.0 deg Group Delay - 0.84 1.0 µsec Group Delay Variation (over 3 dB bandwidth) - 34 130 nsec Relative Attenuation (5) 10 - 945 MHz 995 - 1400 MHz dB dB Adjacent Channel Rejection (Integrated Power) (5) 955.8 - 964.2 MHz 975.8 - 984.2 MHz dB dB Optimal Source Impedance (6) - 50 - Ω Optimal Load Impedance (6) - 50 - Ω Notes: 1. All specifications are based on the test circuit shown below 2. In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over temperature 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances 4. Evaluated as the mean of the 3dB frequencies relative to minimum insertion loss 5. Referenced to minimum insertion loss 6. This is the optimum impedance in order to achieve the performance shown Test Circuit: Actual matching values may vary due to PCB layout and parasitics 50 Ω Single-ended 1,2,3,5 6,7,8,10 50Ω 5pF 50Ω5pf Subject to change or obsolescence without notice Rev B 12-Apr-2006 Page 2 of 5

Typical Performance (at +25oC) Subject to change or obsolescence without notice Rev B 12-Apr-2006 Page 3 of 5

Actual matching values may vary due to PCB layout and parasitics 50 Ω Single-ended 1,2,3,5 6,7,8,10 50Ω 7pF 3.3nH 50Ω3nH 3pF Marking PCB Footprint ID Dot Date Code XXXXXX 856338 SAWTEK 9.291.19 1.011.70 5.00 3.551.53 1.01 1.19 The date code consists of: day of the current year (Julian, 3 digits), last digit of the year (1 digit) and hour (2 digits) This footprint represents a recommendation only Dimensions shown are nominal in millimeters Tape and Reel 5.1 8.0 Ø1.54.0 2.00.3 1.6 Section A-A 9.4 A 1.75 7.5 16.0 AØ1.5 ID dot 2.0 Ø13.0 Ø20.2 Ø102 2.7 16.8 Ø330 Direction of travel Dimensions shown are nominal in millimeters Packaging quantity: 4000 units/reel Subject to change or obsolescence without notice Rev B 12-Apr-2006 Page 4 of 5

Parameter Symbol Minimum Maximum Unit Operating Temperature Range T -40 +85 oC Storage Temperature Range Tstg -55 +85 oC Important Notes Warnings

  • Electrostatic Sensitive Device (ESD)
  • Avoid ultrasonic exposure RoHS Compliance
  • This product complies with EU directive 2002/95/EC (RoHS) Solderability
  • Compatible with JEDEC J-STD-020C Pb-free process, 260°C peak reflow temperature (see soldering profile) Links to Additional Technical Information PCB Layout Tips Qualification Flowchart Soldering Profile S-Parameters RoHS information Other Technical Information Sawtek’s liability is limited only to the Surface Acoustic Wave (SAW) component(s) described in this data sheet. Sawtek does not accept any liability for applications, processes, circuits or assemblies, which are implemented using any Sawtek component described in this data sheet. Contact Information PO Box 609501 Orlando, FL 32860-9501 USA Phone: +1 (407) 886-8860 Fax: +1 (407) 886-7061 Email: custservice@sawtek.com Web: www.sawtek.com Or contact one of our worldwide Network of sales offices, representatives or distributors Pb Subject to change or obsolescence without notice Rev B 12-Apr-2006 Page 5 of 5