856298 TRIQUINT | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

Features

  • For broadband access applications
  • Usable bandwidth 10 MHz
  • Low loss
  • High attenuation
  • No impedance matching required for operation at 200 Ω
  • Balanced operation
  • Ceramic Surface Mount Package (SMP)
  • Small size Package Pin Configuration Surface Mount 3.00 x 3.00 x 1.22 mm Bottom View 7 65 321 Pin No. Description

1 Input

2 Input return

5 Output return

6 Output

3,4,7,8 Case Ground 0.69 1.22 NOM. 1.32 MAX. 0.75 0.601.20 3.00 0.603.00 Dimensions shown are nominal in millimeters All tolerances are ±0.15mm except overall length and width ±0.10mm Body: Al2O3 ceramic Lid: Kovar, Ni plated Terminations: Au plating 0.5 - 1.0µm, over a 2 - 6µm Ni plating Subject to change or obsolescence without notice Rev - 27-Jun-2003 Page 1 of 5

1220 MHz SAW Filter

Electrical Specifications (1) Operating Temperature Range: (2) -10 to +70 oC Parameter (3) Minimum Typical Maximum Unit Center Frequency - 1220 - MHz Maximum Insertion Loss 1215 - 1225 MHz 4.5 5.5 dB Lower 1.5 dB Bandedge (4) Upper 1.5 dB Bandedge 1225 1209.5 1230.5 1215 MHz MHz Stopband Rejection (4) 500 - 1152 MHz 1152 - 1190 MHz 1250 - 1288 MHz 1288 - 2000 MHz dB dB dB dB Amplitude Ripple (5) 1215 - 1225 MHz 0.5 1.5 dB Group Delay Ripple (5) 1215 - 1225 MHz ns Source Impedance (6) - 200 - Ω Load Impedance (6) - 200 - Ω Notes: 1. All specifications are based on the test circuit shown below 2. In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over temperature 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances 4. All attenuation measurements will be referenced the insertion loss at center frequency 5. Maximum peak to adjacent valley measured over the defined range 6. This is the optimum impedance in order to achieve the performance shown Test Circuit: 200 Ω Balanced 3,4,7,8 1 5 200 200 Ω Ω 2 6 No impedance matching required Subject to change or obsolescence without notice Rev - 27-Jun-2003 Page 2 of 5

Typical Performance (at +25oC) Subject to change or obsolescence without notice Rev - 27-Jun-2003 Page 3 of 5

200 Ω Balanced 3,4,7,8 1 5 200 200 Ω Ω 2 6 No impedance matching required Marking PCB Footprint Marking code BJ Date code JJJYM logo ID dot Sawtek 3.20 SQ .38 .23 .81 .96 .81 1.39 The date code consists of: JJJ = Julian day, Y = last digit of year, M = manufacturing site code This footprint represents a recommendation only Dimensions shown are nominal in millimeters Tape and Reel 3.25 Section A-A 1.75 Ø1.5 4.0 A 12.05.5 Ø1.54.0 2.0 3.25 1.4 0.21 A 2.7 Ø20.2 Ø13.0 Ø102 2.0 Ø330 12.8 logo Sawtek Direction of travel ID dot Dimensions shown are nominal in millimeters Packaging quantity: 5000 units/reel Subject to change or obsolescence without notice Rev - 27-Jun-2003 Page 4 of 5

Parameter Symbol Minimum Maximum Unit Operating Temperature Range T -10 +70 oC Storage Temperature Range Tstg -40 +85 oC Warnings

  • Electrostatic Sensitive Device (ESD)
  • Avoid ultrasonic exposure Links to Additional Technical Information PCB Layout Tips Qualification Flowchart S-Parameters Sawtek’s liability is limited only to the Surface Acoustic Wave (SAW) component(s) described in this data sheet. Sawtek does not accept any liability for applications, processes, circuits or assemblies which are implemented using any Sawtek component described in this data sheet. Contact Information PO Box 609501 Orlando, FL 32860-9501 USA Phone: +1 (407) 886-8860 Fax: +1 (407) 886-7061 Email: custservice@sawtek.com Web: www.sawtek.com Or contact one of our worldwide network of sales offices, representatives or distributors Soldering Profile Other Technical Information Subject to change or obsolescence without notice Rev - 27-Jun-2003 Page 5 of 5