856104 TRIQUINT | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

Features

  • For GSM applications
  • Usable bandwidth 60 MHz
  • High attenuation
  • Superior amplitude and phase balance
  • Single-ended input
  • Balanced output
  • Ceramic Surface Mount Package (SMP)
  • Small size Package Pin Configuration Surface Mount 2.50 x 2.00 x 0.76 mm Bottom View 5 4 Pin No. Description

1 Input, Unbalanced

2,5 Input, Case ground 3,4 Output, Balanced 0.76 NOM. 0.84 MAX. 0.50 0.502.00 2.50 0.94 1.38 0.94 Dimensions shown are nominal in millimeters All tolerances are ±0.10mm Body: Al2O3 ceramic Lid: Kovar or Alloy 42, Au over Ni plated Terminations: Au plating 0.5 - 1.0µm, over a 2 - 6µm Ni plating

1960 MHz SAW Filter

Subject to change or obsolescence without notice Rev A 10-Sep-2002 Page 2 of 6 Electrical Specifications (1) Operating Temperature Range: (2) +25 oC Parameter (3) Minimum Typical Maximum Unit Center Frequency - 1960 - MHz Maximum Insertion Loss 1930 - 1990 MHz 2.6 3.0 dB Absolute Attenuation 0 - 1000 MHz 1000 - 1830 MHz 1830 - 1910 MHz 2010 - 2070 MHz 2070 - 3000 MHz 3000 - 5000 MHz 5000 - 6000 MHz dB dB dB dB dB dB dB Input/Output Return Loss 1930 - 1990 MHz 8.5 10.5 dB Output Amplitude Balance (|S31/S21|) 1930 - 1990 MHz -1.5 0.7 1.5 dB Output Phase Balance φ(S31)- φ(S21) 1930 - 1990 MHz 168 178 -187 192 degree Source Impedance - 50 - Ω Optimal Load Impedance (4) - 200 || 16nH - Ω Notes: 1. All specifications are based on the test circuit shown below 2. This specification is valid for room temperature only. The specification over the full temperature range(s) is available on the next page(s) 3. Electrical margin has been built into the design to account for the variations due to manufacturing tolerances 4. This is the optimum impedance for maximum power transfer given a 50 ohm source impedance Test Circuit: Actual matching values may vary due to PCB layout and parasitics 50 Ω Single-ended Input 2,5 1 3 50Ω 4 200Ω16nH 200 Ω Balanced Output

Subject to change or obsolescence without notice Rev A 10-Sep-2002 Page 3 of 6 Electrical Specifications (1) Operating Temperature Range: (2) -25 to +80 oC Parameter (3) Minimum Typical Maximum Unit Center Frequency - 1960 - MHz Maximum Insertion Loss 1930 - 1990 MHz 1930 - 1990 MHz ( -10 to +75 oC ) 2.6 2.6 4.0 3.5 dB dB Absolute Attenuation 0 - 1000 MHz 1000 - 1830 MHz 1830 - 1910 MHz 2010 - 2070 MHz 2070 - 3000 MHz 3000 - 5000 MHz 5000 - 6000 MHz dB dB dB dB dB dB dB Input/Output Return Loss 1930 - 1990 MHz 8.5 10.5 dB Output Amplitude Balance (|S31/S21|) 1930 - 1990 MHz -1.5 0.7 1.5 dB Output Phase Balance φ(S31)- φ(S21) 1930 - 1990 MHz 168 178 -187 192 degree Source Impedance - 50 - Ω Optimal Load Impedance (4) - 200 || 16nH - Ω Notes: 1. All specifications are based on the test circuit shown below 2. In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over temperature 3. Electrical margin has been built into the design to accoun t for the variations due to temperature drift and manufacturing tolerances 4. This is the optimum impedance for maximum power transfer given a 50 ohm source impedance Test Circuit: Actual matching values may vary due to PCB layout and parasitics 50 Ω Single-ended Input 2,5 1 3 50Ω 4 200Ω16nH 200 Ω Balanced Output

Subject to change or obsolescence without notice Rev A 10-Sep-2002 Page 4 of 6 Typical Performance (at +25oC)

Subject to change or obsolescence without notice Rev A 10-Sep-2002 Page 5 of 6 Matching Schematics Actual matching values may vary due to PCB layout and parasitics 50 Ω Single-ended Input 2,5 1 3 50Ω 4 200Ω16nH 200 Ω Balanced Output Marking PCB Footprint X JJJYM ID dot Date code Marking codelogo Sawtek .71 SQ .69 .23 2.08 2.59 The date code consists of: JJJ = Julian day, Y = last digit of year, M = manufacturing site code This footprint represents a recommendation only Dimensions shown are nominal in millimeters Tape and Reel 1.75 3.5 8.0 A A2.0 4.0 4.0 Ø1.0 Ø1.5 2.75 1.1 0.254 Section A-A 2.23 2.7 8.8 Ø330 Ø102 Ø20.2 Ø13.0 2.0 ID dot Direction of travel Sawtek logo Dimensions shown are nominal in millimeters Packaging quantity: 10000 units/reel

Subject to change or obsolescence without notice Rev A 10-Sep-2002 Page 6 of 6 Maximum Ratings Parameter Symbol Minimum Maximum Unit Operating Temperature Range T -25 +80 oC Storage Temperature Range T stg -40 +85 oC Warnings

  • Electrostatic Sensitive Device (ESD)
  • Avoid ultrasonic exposure Links to Additional Technical Information PCB Layout Tips Qualification Flowchart Soldering Profile S-Parameters Other Technical Information Sawtek’s liability is limited only to the Surface Acoustic Wave (SAW) component(s) described in this data sheet. Sawtek does not accept any liability for applications, processes, circuits or assemblies which are implemented using any Sawtek component described in this data sheet. Contact Information PO Box 609501 Orlando, FL 32860-9501 USA Phone: +1 (407) 886-8860 Fax: +1 (407) 886-7061 Email: custservice@sawtek.com Web: www.sawtek.com Or contact one of our worldwide Network of sales offices, Representatives or distributors