DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 6
Technical content
140 MHz SAW Filter
Data Sheet: Rev C 03/14/11 - 1 of 6 - Disclaimer: Subject to change without notice e © 2011 TriQuint Semiconductor, Inc. Connecting the Digital World to the Global Network ®
Applications
Typical 3dB Bandwidth of 57.0 MHz Low loss High attenuation Single-ended operation Replaces P/N 851947 (BW 3dB=56 MHz) Ceramic Surface Mount Package (SMP) Small Size Dimensions: 9.0 x 7.0 x 1.5mm Hermetically Sealed RoHS compliant, Pb-free Gnd Gnd Gnd Output return Output Input Input return Gnd Gnd Gnd 1 2 3 8 7 6 General Description Pin Configuration The 856074 is a high -performance IF SAW filter with a center frequency of 140 MHz and a 3 dB bandwidth o f 57.0 MHz. It features low loss with excellent attenuation, and is designed to be used with a single ended input and output. The device is RoHS compliant and Pb-free. Pin # SE Description
9 Input
10 Input Return
4 Output
5 Output Return
1,2,3,6,7,8 Case Ground
Ordering Information
Part No. Description 856074 packaged part 856074-EVB evaluation board Standard T/R size = 2000 units/reel. Pb
Data Sheet: Rev C 03/14/11 - 2 of 6 - Disclaimer: Subject to change without notice e © 2011 TriQuint Semiconductor, Inc. Connecting the Digital World to the Global Network ® Specifications Electrical Specifications (1) Specified Temperature Range: (2) 0 to +70 ºC Parameter (3) Conditions Min Typical (4) Max Units Center Frequency - 140 - MHz Minimum Insertion Loss - 18.65 19.5 dB Lower 1dB Band Edge (5) Upper 1dB Band Edge (5) 164.25 112.7 166.1 115.75 MHz MHz Lower 3dB Band Edge (5) Upper 3dB Band Edge (5) 167.2 111.4 168.4 112.8 MHz MHz Lower 40dB Band Edge (5) Upper 40dB Band Edge (5) 102.2 106.3 176.4 177.8 MHz MHz Amplitude Variation 115.75 – 164.25 MHz - 0.60 1.15 dB p-p Phase Linearity 115.75 – 164.25 MHz - 4.07 7.75 deg p-p Group Delay Variation 115.75 – 164.25 MHz - 31 60 ns p-p Group Delay 115.75 – 164.25 MHz - 0.531 - µs Relative Attenuation (5) 10 – 27.5 MHz 27.5 –102 MHz 178 – 252.5 MHz 252.5 – 300 MHz dB dB dB dB Source Impedance (single-ended) (6) - 50 - Load Impedance (single-ended) (6) - 50 - Temperature Coefficient of Frequency - -74 - ppm/ ºC Notes: 1. All specifications are based on the TriQuint schematic for the main reference design shown on page 3 2. In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over temperature 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances 4. Typical values are based on average measurements at room temperature 5. Relative to minimum insertion loss 6. This is the optimum impedance in order to achieve the performance shown Absolute Maximum Ratings Parameter Rating Operating Temperature 0 to +70 oC Storage Temperature -40 to +85 oC Operation of this device outside the parameter ranges given above may cause permanent damage.
Data Sheet: Rev C 03/14/11 - 3 of 6 - Disclaimer: Subject to change without notice e © 2011 TriQuint Semiconductor, Inc. Connecting the Digital World to the Global Network ® Reference Design – 50 SE Input, 50 SE Output Schematic Single-ended Input 1,2,3,5 6,7,8,10 82nH 9 4 12nH Single-ended Output Notes: 1. Actual matching values may vary due to PCB layout and parasitics PC Board Mounting Configuration L2JJJYHH 856074 CN1 CN2 SAWTEK 960590 1.22 9.19 1.32 1.22 3.76 1.32 1.322.07 7.21 Notes: Top, middle & bottom layers: 1 oz copper Substrates: FR4 dielectric, .031” thick Finish plating: Nickel: 3-8µm thick, Gold: .03-.2µm thick Hole plating: Copper min .0008µm thick Notes: 1. All dimensions are in millimeters. 2. This footprint represents a recommendation only. Bill of Material Reference Desg. Value Description Manufacturer Part Number L1 12nH Coil Wire-wound, 0603, 5% MuRata LQW18AN12NJ10 L2 82nH Coil Wire-wound, 0603, 5% MuRata LQW18AN82NJ10 SMA N/A SMA connector Radiall USA Inc. 9602-1111-018 PCB N/A 3-layer multiple 960590
Data Sheet: Rev C 03/14/11 - 4 of 6 - Disclaimer: Subject to change without notice e © 2011 TriQuint Semiconductor, Inc. Connecting the Digital World to the Global Network ® Typical Performance (at room temperature)
Data Sheet: Rev C 03/14/11 - 5 of 6 - Disclaimer: Subject to change without notice e © 2011 TriQuint Semiconductor, Inc. Connecting the Digital World to the Global Network ® Mechanical Information Package Information, Dimensions and Marking 0.76 9.00 2.54 2.54 1.12 1.02 7.01 1.80 1.50 NOM. 1.65 MAX. 1.02 x 2.54 Date CodeID dot JJJYHH 856074 SAWTEK Package Style: SMP-35B Dimensions: 9.00 x 7.01 x 1.50 mm Body: Al2O3 ceramic Lid: Kovar, Ni plated Terminations: Au plating 0.5 - 1.0μm, over a 2-6μm Ni plating All dimensions shown are nominal in millimeters All tolerances are ±0.15mm except overall length and width ±0.10mm The date code consists of: day of the current year (Julian, 3 digits), last digit of the year (1 digit) and hour (2 digits) Tape and Reel Information Standard T/R size = 2000 units/reel. All dimensions are in millimeters Ø13.0 Ø20.2 Ø102 Ø330 16.8 2.7 ID dot Direction of travel2.0 A AØ1.512.0 4.0 Ø1.52.0 9.22 7.222.2 Section A-A 0.3 16.0 7.5 1.75
Data Sheet: Rev C 03/14/11 - 6 of 6 - Disclaimer: Subject to change without notice e © 2011 TriQuint Semiconductor, Inc. Connecting the Digital World to the Global Network ® Product Compliance Information ESD Information ESD Rating: 1B Value: Passes 650 V min. Test: Human Body Model (HBM) Standard: JEDEC Standard JESD22-A114 ESD Rating: B Value: Passes 300 V min. Test: Machine Model (MM) Standard: JEDEC Standard JESD22-A115 Solderability Compatible with th e latest version of J -STD-020, l ead free solder, 260°C Refer to Soldering Profile for recommended guidelines. This part is compliant with EU 2002/95/EC RoHS directive (Restrictions on the Use of Certain Hazardous Substances in Electrical and Electronic Equipment). This product also has the following attributes: Halogen Free (Chlorine, Bromine) Antimony Free TBBP-A (C15H12Br402) Free PFOS Free SVHC Free MSL Rating Devices are Hermetic, therefore MSL is not applicable. Contact Information For the latest specifications, additional product information, worldwide sales and distribution locations, and information about TriQuint: Email: info-sales@tqs.com Fax: +1.407.886.7061 For technical questions and application information: Email: applications.engineering@tqs.com Important Notice The information contained herein is believed to be reliable . TriQuint makes no warranties regarding the information contain herein. TriQuint assumes no responsibility or liability whatsoever for any of the information contained her ein. TriQuint assumes no responsibility or liability w hatsoever for the use of the information contained herein. The information contained herein is provided "AS IS, WHERE IS" and with all faults, and the entire risk associated with such information is entirely wi th the user. All information contained herei n is subject to change without notice. Customers should obtain and verify the latest relevant information before placing orders for TriQuint products. The information contained herein or any use of such information does not grant, explicitly or implicitl y, to any party any patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or anything described by such information. TriQuint products are not warranted or authorized for use as critical components in medical, life -saving, or life -sustaining applications, or other applications where a failure would reasonably be expected to cause severe personal injury or death.