856071_15 TRIQUINT | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

Features

  • For broadband applications
  • Typical 3 dB bandwidth of 16.2 MHz
  • High attenuation
  • Single-ended operation
  • Ceramic Surface Mount Package (SMP)
  • Replaces Sawtek P/N 851927 (BW 3dB=16 MHz)
  • Hermetic
  • RoHS compliant (2002/95/EC), Pb-free Package Pin Configuration Surface Mount 13.30 x 6.50 x 1.50 mm Bottom View 678910 54321 Pin No. Description

5 Output

10 Input

1,6 Ground 2,3,4 Case ground 7,8,9 Case ground 1.80 6.50 1.02 1.91 13.3 2.31 R0.51 1.50 NOM. 1.65 MAX. 0.64 Dimensions shown are nominal in millimeters All tolerances are ±0.15mm except overall length and width ±0.10mm Body: Al2O3 ceramic Lid: Kovar, Ni plated Terminations: Au plating 0.5 - 1.0µm, over a 2 - 6µm Ni plating Pb Subject to change or obsolescence without notice Rev B 10-Oct-2005 Page 1 of 5

140 MHz SAW Filter

Subject to change or obsolescence without notice Rev B 10-Oct-2005 Page 2 of 5 Electrical Specifications (1) Operating Temperature Range: (2) 0 to +70 oC Parameter (3) Minimum Typical Maximum Unit Center Frequency - 140 - MHz Minimum Insertion Loss - 21.7 22.5 dB Lower 1 dB Bandedge (4) Upper 1 dB Bandedge 146.99 132.32 147.77 133.01 MHz MHz Lower 3 dB Bandedge (4) Upper 3 dB Bandedge 147.4 131.93 148.14 132.6 MHz MHz Lower 40 dB Bandedge (4) Upper 40 dB Bandedge 129.656 130.33 149.67 150.344 MHz MHz Amplitude Variation 133.01 - 146.99 MHz 0.44 0.87 dB Phase Linearity 133.01 - 146.99 MHz 2.99 5.67 deg Group Delay Variation 133.01 - 146.99 MHz nsec Absolute Delay - 1.09 - µsec Relative Attenuation (4) 15 - 100 MHz 100 - 125 MHz 155 - 175 MHz 175 - 270 MHz 270 - 280 MHz 280 - 350 MHz 49.5 47.5 dB dB dB dB dB dB Source Impedance (5) - 50 - Ω Load Impedance (5) - 50 - Ω Substrate Material - YZ LiNbO3 - - Temperature Coefficient of Frequency - -94 - ppm/oC Notes: 1. All specifications are based on the test circuit shown below 2. In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over temperature 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances 4. All attenuation measurements are measured relative to minimum insertion loss 5. This is the optimum impedance in order to achieve the performance shown Test Circuit: Actual matching values may vary due to PCB layout and parasitics 50Ω Single-ended 1,2,3,4 6,7,8,9 50Ω 10 5 100nH 50Ω39nH

Typical Performance (at +25oC) Subject to change or obsolescence without notice Rev B 10-Oct-2005 Page 3 of 5

Actual matching values may vary due to PCB layout and parasitics 50Ω Single-ended 1,2,3,4 6,7,8,9 50Ω 10 5 100nH 50Ω39nH Marking PCB Footprint XXXXXX 856071 SAWTEK 2.51 6.70 8.86 .69 1.222.00 The date code consists of: day of the current year (Julian, 3 digits), last digit of the year (1 digit) and hour (2 digits) This footprint represents a recommendation only Dimensions shown are nominal in millimeters Tape and Reel A A 1.75 11.5 Ø1.52.3 13.9 4.0 Ø1.52.00.3 12.07.1 Section A-A Dimensions shown are nominal in millimeters Packaging quantity: 2000 units/reel Direction of travel Ø330 24.8 2.7 Ø102 Ø13.0 Ø20.2 2.0 ID dot Subject to change or obsolescence without notice Rev B 10-Oct-2005 Page 4 of 5

Parameter Symbol Minimum Typical Maximum Unit Operating Temperature Range T 0 +25 +70 oC Storage Temperature Range Tstg -40 - +85 oC Important Notes Warnings

  • Electrostatic Sensitive Device (ESD)
  • Avoid ultrasonic exposure RoHS Compliance
  • This product complies with EU directive 2002/95/EC (RoHS) Solderability
  • Compatible with JEDEC J-STD-020C Pb-free process, 260°C peak reflow temperature (see soldering profile) Links to Additional Technical Information PCB Layout Tips Qualification Flowchart Soldering Profile S-Parameters RoHS Information Other Technical Information Sawtek’s liability is limited only to the Surface Acoustic Wave (SAW) component(s) described in this data sheet. Sawtek does not accept any liability for applications, processes, circuits or assemblies, which are implemented using any Sawtek component described in this data sheet. Contact Information PO Box 609501 Orlando, FL 32860-9501 USA Phone: +1 (407) 886-8860 Fax: +1 (407) 886-7061 Email: custservice@sawtek.com Web: www.sawtek.com Or contact one of our worldwide Network of sales offices, representatives or distributors Pb Subject to change or obsolescence without notice Rev B 10-Oct-2005 Page 5 of 5