856069 TRIQUINT | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

Features

  • For broadband applications
  • Typical 3 dB bandwidth of 10 MHz
  • High attenuation
  • No impedance matching required for operation at 50 Ω
  • Single-ended operation
  • Ceramic Surface Mount Package (SMP)
  • Small size
  • Replaces Sawtek P/N 851921 (BW 3dB=10 MHz) Package Pin Configuration Surface Mount 13.3 x 6.50 x 1.50 mm Bottom View 678910 54321 Pin No. Description

1 Input return

5 Output

6 Output return

10 Input

2,3,4 Case ground 7,8,9 Case ground 1.80 6.50 1.02 1.91 13.3 2.31 R0.51 1.50 NOM. 1.65 MAX. 0.64 Dimensions shown are nominal in millimeters All tolerances are ±0.15mm except overall length and width ±0.10mm Body: Al2O3 ceramic Lid: Kovar, Ni plated Terminations: Au plating 0.5 - 1.0µm, over a 2 - 6µm Ni plating Subject to change or obsolescence without notice Rev - 08-Oct-2002 Page 1 of 5

140 MHz SAW Filter

Electrical Specifications (1) Operating Temperature Range: (2) -30 to +85 oC Parameter (3) Minimum Typical Maximum Unit Center Frequency - 140 - MHz Minimum Insertion Loss - 20.87 21.7 dB Lower 1 dB Bandedge (4) Upper 1 dB Bandedge 144.508 135.38 144.79 135.524 MHz MHz Lower 3 dB Bandedge (4) Upper 3 dB Bandedge 145 135.00 145.24 135 MHz MHz Lower 40 dB Bandedge (4) Upper 40 dB Bandedge 133.379 133.85 146.72 146.551 MHz MHz Amplitude Variation 135.524 - 144.508 MHz 0.7 0.94 dB Phase Linearity 135.524 - 144.508 MHz 6.31 deg Group Delay Variation 135.524 - 144.508 MHz 57.3 nsec Absolute Delay - 1.52 - µsec Relative Attenuation (4) 15 - 130 MHz 130 - 133 MHz 147 - 150 MHz 150 - 350 MHz 47.8 50.6 51.3 dB dB dB dB Source Impedance (5) - 50 - Ω Load Impedance (5) - 50 - Ω Substrate Material - LINbO3 - - Temperature Coefficient of Frequency - -94 - ppm/oC Notes: 1. All specifications are based on the test circuit shown below 2. In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over temperature 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances 4. All attenuation measurements are measured relative to minimum insertion loss 5. This is the optimum impedance in order to achieve the performance shown Test Circuit: 50 Ω Single-ended 1,2,3,4 6,7,8,9 10 5 50 50Ω Ω 15nH 68nH No impedance matching required Subject to change or obsolescence without notice Rev - 08-Oct-2002 Page 2 of 5

Typical Performance (at +25oC) Subject to change or obsolescence without notice Rev - 08-Oct-2002 Page 3 of 5

50 Ω Single-ended 1,2,3,4 6,7,8,9 10 5 50 50Ω Ω 15nH 68nH No impedance matching required Marking PCB Footprint XXXXXX 856069 SAWTEK 2.00 1.22 .69 8.84 6.70 The date code consists of: JJJ = Julian day, Y = last digit of year, M = manufacturing site code This footprint represents a recommendation only Dimensions shown are nominal in millimeters Tape and Reel A A 1.75 11.5 Ø1.52.3 13.9 4.0 Ø1.52.00.3 12.07.1 Section A-A Dimensions shown are nominal in millimeters Packaging quantity:2000 units/reel Direction of travel Ø330 24.8 2.7 Ø102 Ø13.0 Ø20.2 2.0 ID dot Subject to change or obsolescence without notice Rev - 08-Oct-2002 Page 4 of 5

Parameter Symbol Minimum Maximum Unit Operating Temperature Range T -30 +85 oC Storage Temperature Range Tstg -40 +85 oC Warnings

  • Electrostatic Sensitive Device (ESD)
  • Avoid ultrasonic exposure Links to Additional Technical Information PCB Layout Tips Qualification Flowchart S-Parameters Sawtek’s liability is limited only to the Surface Acoustic Wave (SAW) component(s) described in this data sheet. Sawtek does not accept any liability for applications, processes, circuits or assemblies which are implemented using any Sawtek component described in this data sheet. Contact Information PO Box 609501 Orlando, FL 32860-9501 USA Phone: +1 (407) 886-8860 Fax: +1 (407) 886-7061 Email: custservice@sawtek.com Web: www.sawtek.com Or contact one of our worldwide Network of sales offices, Representatives or distributors Soldering Profile Other Technical Information Subject to change or obsolescence without notice Rev - 08-Oct-2002 Page 5 of 5