856066_15 TRIQUINT | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

Features

  • For broadband applications
  • Typical 3 dB bandwidth of 6.2 MHz
  • High attenuation
  • Single-ended operation
  • Ceramic Surface Mount Package (SMP)
  • Replaces Sawtek P/N 851913 (BW 3dB=6.0 MHz)
  • Hermetic
  • RoHS compliant (2002/95/EC), Pb -free Package Pin Configuration Surface Mount 13.30 x 6.50 x 1.50 mm Bottom View SMP-53C 678910 54321 Single -ended Configuration Pin No. Description

10 RF i nput

5 RF output

1,6 Ground 2,3,4 Case ground 7,8,9 Case ground 1.80 6.50 1.02 1.91 13.3 2.31 R0.51 1.50 NOM. 1.65 MAX. 0.64 Dimensions shown are nominal in millimeters All tolerances are ±0.15mm except overall length and width ±0.10mm Body: Al 2O 3 ceramic Lid: Kovar , Ni plated Terminations: Au plating 0.5 - 1.0µm, over a 2 – 6µm Ni plating Pb

140 MHz SAW Filter

Subject to change or obsolescence without notice Rev D 05/08 © TriQuint Semiconductor Page 2 of 5 Electrical Specifications (1) Operating Temperature Range: (2) 0 to +70 °C Parameter (3) Minimum Typical (4) Maximum Unit Center Frequency - 140 - MHz Minimum Insertion Loss - 23 24.5 dB Lower 1 dB Bandedge (5) Upper 1 dB Bandedge (5) 142.72 137.1 142.9 137.28 MHz MHz Lower 3 dB Band Edge (5) Upper 3 dB Band Edge (5) 143 136.9 143.1 137 MHz MHz Lower 40 dB Band Edge (5) Upper 40 dB Band Edge (5) 135.83 136 144 144.17 MHz MHz Amplitude Variation 137.28 -142.72 MHz 0.5 0.9 dB Phase Linearity 137.28 -142.72 MHz 2.0 3.0 deg Group Delay Variation 137.28 -142.72 MHz ns p-p Absolute Delay - 1.6 - µsec Relative Attenuation (5) 15 -135 MHz 145 - 350 MHz dB dB Substrate Material - LiTaO 3 - - Temperature Coefficient of Frequency - -23 - ppm/ oC Source Impedance (single-ended) (6) Load Impedance (single-ended) (6) Ω Ω Notes : 1. All specifications are based on the TriQuint test circuit shown below 2. In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over temperature 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances 4. Typical values are based on average measurements at room temperature 5. Relative to minimum insertion loss 6. This is the optimum impedance in order to achieve the performance shown Test Circuit: Actual matching values may vary due to PCB layout and parasitics 50 Ω Single-ended Input 1,2,3,4 6,7,8,9 50 ΩΩ ΩΩ 56pF 10 5 12nH 50 ΩΩ ΩΩ47nH 47pF 50 Ω Single-ended Output

Subject to change or obsolescence without notice Rev D 05/08 © TriQuint Semiconductor Page 3 of 5 Typical Performance (at room temperature)

Subject to change or obsolescence without notice Rev D 05/08 © TriQuint Semiconductor Page 4 of 5 Matching Schematics Actual matching values may vary due to PCB layout and parasitics 50 Ω Single-ended Input 1,2,3,4 6,7,8,9 50 ΩΩ ΩΩ 56pF 10 5 12nH 50 ΩΩ ΩΩ47nH 47pF 50 Ω Single-ended Output Marking PCB Footprint XXXXXX 856066 SAWTEK 2.51 6.70 8.86 .69 1.22 2.00 The date code consists of: day of the current year (Julian, 3 digits), last digit of the year (1 digit) and hour (2 digits) This footprint represents a recommendation only Dimensions shown are nominal in millimeters Tape and Reel A A 1.75 11.5 Ø1.5 2.3 13.9 4.0 Ø1.5 2.0 0.3 12.0 7.1 Section A-A Direction of travel Ø330 24.8 2.7 Ø102 Ø13.0 Ø20.2 2.0 ID dot Dimensions shown are nominal in millimeters Packaging quantity: 2000 units/reel

Subject to change or obsolescence without notice Rev D 05/08 © TriQuint Semiconductor Page 5 of 5 Maximum Ratings Parameter Symbol Minimum Maximum Unit Operating Temperature Range T 0 +70 oC Storage Temperature Range T stg -40 +85 oC Important Notes Warnings

  • Electrostatic Sensitive Device (ESD)
  • Avoid ultrasonic exposure RoHS Compliance
  • This product complies with EU directive 2002/95/EC (RoHS) Solderability
  • Compatible with JESD22-B102, Pb-free process, 260C peak reflow temperature (see soldering profile ) Links to Additional Technical Information PCB Layout Tips Qualification Flowchart Soldering Profile S-Parameters RoHS Information Other Technical Information TriQuint’s liability is limited only to the Surface Acoustic Wave (SAW) component(s) described in this data sheet. TriQuint does not accept any liability for applications, processes, circuits or assemblies, which are implemented using any TriQuint component described in this data sheet. Contact Information PO Box 609501 Orlando, FL 32860-9501 USA Phone: +1 (407) 886-8860 Fax: +1 (407) 886-7061 Email: info-product@tqs.com Web: www.triquint.com Or contact one of our worldwide Network of sales offices, Representatives or distributors Pb