856048 TRIQUINT | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 5
Technical content
Features
- For multichannel CDMA transceiver applications
- Usable bandwidth 3.75 MHz
- High attenuation
- Single-ended operation
- Ceramic Surface Mount Package (SMP) Package Pin Configuration Surface Mount 13.3 x 6.50 x 1.50 mm Bottom View 678910 54321 Pin No. Description
5 Output
10 Input
1,2,3,4 Case ground 6,7,8,9 Case ground 1.80 6.50 1.02 1.91 13.3 2.31 R0.51 1.50 NOM. 1.65 MAX. 0.64 Dimensions shown are nominal in millimeters All tolerances are ±0.15mm except overall length and width ±0.10mm Body: Al2O3 ceramic Lid: Kovar, Ni plated Terminations: Au plating 0.5 - 1.0µm, over a 2 - 6µm Ni plating
153.6 MHz SAW Filter
Subject to change or obsolescence without notice Rev - 30-May-2002 Page 2 of 5 Electrical Specifications (1) Operating Temperature Range: (2) -40 to +85 oC Parameter (3) Minimum Typical Maximum Unit Center Frequency - 153.6 - MHz Minimum Insertion Loss - 12.04 14 dB Passband Variation - 0.603 1 dB p-p Lower 1 dB Bandedge (4) Upper 1 dB Bandedge 155.475 151.616 155.644 151.725 MHz MHz Phase Ripple (straight line fit) 151.725 - 155.475 MHz 1.306 2.2 deg RMS Phase Ripple (straight line fit) 151.725 - 155.475 MHz 7.033 deg p-p Minimum Rejection (4) 15 - 148.7 MHz 158.5 - 200 MHz 62.42 56.143 dB dB Relative Attenuation (4)
145.65 MHz
148.685 MHz
148.7 MHz
150.1 MHz
150.37 MHz
151.1 MHz
156.1 MHz
156.83 MHz
157.1 MHz
158.5 MHz
166.47 MHz
22.5 17.5 17.5 22.5 72.75 68.26 68.97 47.03 44.44 10.01 5.21 31.81 44.65 69.75 75.69 dB dB dB dB dB dB dB dB dB dB dB Input/Output VSWR 151.725 - 155.475 MHz 1.5:1 2.51:1 Source Impedance (5) - 50 - Ω Load Impedance (5) - 50 - Ω Notes: 1. All specifications are based on the test circuit shown on page 4 2. In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over temperature 3. Electrical margin has been built into the design to accoun t for the variations due to temperature drift and manufacturing tolerances 4. All attenuation meas urements are relative to minimum insertion loss 5. This is the optimum impedance in order to achieve the performance shown
Subject to change or obsolescence without notice Rev - 30-May-2002 Page 3 of 5 Typical Performance (at +25oC)
Subject to change or obsolescence without notice Rev - 30-May-2002 Page 4 of 5 Matching Schematics Actual matching values may vary due to PCB layout and parasitics 50 Ω Single-ended 1,2,3,4 6,7,8,9 50Ω 82nH 10 5 47nH 50Ω 220nH 150nH Marking PCB Footprint XXXXXX 856048 SAWTEK 2.00 1.22 .69 8.84 6.70 The date code consists of: day of the current year (Julian, 3 digits), last digit of the year (1 digit) and hour (2 digits) This footprint represents a recommendation only Dimensions shown are nominal in millimeters Tape and Reel A A 1.75 11.5 Ø1.52.3 13.9 4.0 Ø1.52.00.3 12.07.1 Section A-A Direction of travel Ø330 24.8 2.7 Ø102 Ø13.0 Ø20.2 2.0 ID dot Dimensions shown are nominal in millimeters Packaging quantity: 2000 units/reel
Subject to change or obsolescence without notice Rev - 30-May-2002 Page 5 of 5 Maximum Ratings Parameter Symbol Minimum Maximum Unit Operating Temperature Range T -40 +85 oC Storage Temperature Range T stg -60 +125 oC Warnings
- Electrostatic Sensitive Device (ESD)
- Avoid ultrasonic exposure Links to Additional Technical Information PCB Layout Tips Qualification Flowchart Soldering Profile S-Parameters Other Technical Information Sawtek’s liability is limited only to the Surface Acoustic Wave (SAW) component(s) described in this data sheet. Sawtek does not accept any liability for applications, processes, circuits or assemblies which are implemented using any Sawtek component described in this data sheet. Contact Information PO Box 609501 Orlando, FL 32860-9501 USA Phone: +1 (407) 886-8860 Fax: +1 (407) 886-7061 Email: custservice@sawtek.com Web: www.sawtek.com Or contact one of our worldwide Network of sales offices, Representatives or distributors