855860 TRIQUINT | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

Features

  • For DCS applications
  • Usable bandwidth 75 MHz
  • Low loss
  • No impedance matching required for operation at 50 Ω
  • Single-ended operation
  • Ceramic Surface Mount Package (SMP)
  • Small size Package Pin Configuration Surface Mount 3.00 x 3.00 x 1.22 mm Bottom View 65 4 321 0.69 1.22 NOM. 1.32 MAX. 0.75 0.60 1.50 0.75 3.00 3.00 Dimensions shown are nominal in millimeters All tolerances are ±0.15mm except overall length and width ±0.10mm Body: Al2O3 ceramic Lid: Kovar, Ni plated Terminations: Au plating 0.5 - 1.0µm, over a 2 - 6µm Ni plating Pin No. Description 2,5 Input/Output 1,3,4,6 Case ground

1842.5 MHz SAW Filter

Subject to change or obsolescence without notice Rev A 14-Sep-2001 Page 2 of 5 Electrical Specifications (1) Operating Temperature Range: (2) -20 to +70 oC Parameter (3) Minimum Typical Maximum Unit Center Frequency - 1842.5 - MHz Maximum Insertion Loss 1805 - 1815 MHz 1805 - 1815 MHz 1815 - 1870 MHz 1870 - 1880 MHz (+15 to +70 oC) ( -20 to +15 oC) 2.8 1.9 2.1 3.3 3.7 3.6 dB dB dB dB Absolute Attenuation 10 - 1720 MHz 1720 - 1765 MHz 1765 - 1785 MHz 1920 - 1980 MHz 1980 - 2410 MHz 2410 - 3120 MHz 3120 - 4000 MHz dB dB dB dB dB dB dB Input/Output Return Loss 1805 - 1880 MHz 6 9.2 - dB Source Impedance: (4) -5 0 - Ω Load Impedance: (4) -5 0 - Ω Notes: 1. All specifications are based on the test circuit shown below 2. In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance ove r temperature 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing to lerances 4. This is the optimum impedance in order to achieve the performance shown Test Circuit: 50 Ω Single-ended 1,3,4,6 2 5 50 50ΩΩΩΩ ΩΩΩΩ No impedance matching required

Subject to change or obsolescence without notice Rev A 14-Sep-2001 Page 3 of 5 Typical Performance (at +25oC)

Subject to change or obsolescence without notice Rev A 14-Sep-2001 Page 4 of 5 Matching Schematics 50 Ω Single-ended 1,3,4,6 2 5 50 50ΩΩΩΩ ΩΩΩΩ No impedance matching required Marking PCB Footprint Marking code Date code V JJJYM logo ID dot Sawtek .963.20 SQ 1.27 .38 .81 1.70 The date code consists of: JJJ = Julian day, Y = last digit of year, M = manufacturing site code This footprint represents a recommendation only Dimensions shown are nominal in millimeters Tape and Reel 3.25 Section A-A 1.75 Ø1.5 4.0 A 12.05.5 Ø1.54.0 2.0 3.25 1.4 0.21 A Ø102 Ø20.2 Ø13.0

2.0 Direction of travel

Ø330 12.8 2.7 logo Sawtek ID dot Dimensions shown are nominal in millimeters Packaging quantity: 5000 units/reel

Subject to change or obsolescence without notice Rev A 14-Sep-2001 Page 5 of 5 Maximum Ratings Parameter Symbol Minimum Maximum Unit Operating Temperature Range T -20 +70 oC Storage Temperature Range T stg -40 +85 oC RF Power P in - +13 dBm Warnings

  • Electrostatic Sensitive Device (ESD)
  • Avoid ultrasonic exposure Links to Additional Technical Information PCB Layout Tips Qualification Flowchart Soldering Profile S-Parameters Other Technical Information Contact Information PO Box 609501 Orlando, FL 32860-9501 USA Phone: +1 (407) 886-8860 Fax: +1 (407) 886-7061 Email: custservice@sawtek.com Web: www.sawtek.com Or contact one of our worldwide Network of sales offices, Representatives or distributors