855810_15 TRIQUINT | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 5
Technical content
Features
- For EGSM applications
- Usable bandwidth 35 MHz
- High attenuation
- No impedance matching required for operation at 50 Ω
- Single-ended operation
- Ceramic Surface Mount Package (SMP)
- Hermetic
- RoHS compliant (2002/95/EC), Pb-free Package Pin Configuration Surface Mount 3.00 x 3.00 x 1.22 mm Bottom View 65 4 321 0.69 1.22 NOM. 1.32 MAX. 0.75 0.60 1.50 0.75 3.00 3.00 Dimensions shown are nominal in millimeters All tolerances are ±0.15mm except overall length and width ±0.10mm Body: Al2O3 ceramic Lid: Kovar, Ni plated Terminations: Au plating 0.5 - 1.0µm, over a 2 - 6µm Ni plating Pin No. Description 2,5 Input/Output 1,3,4,6 Case ground Pb Subject to change or obsolescence without notice Rev C 13-Aug-2006 Page 1 of 5
942.5 MHz SAW Filter
Electrical Specifications (1) Operating Temperature Range: (2) -40 to +85 oC Parameter (3) Minimum Typical Maximum Unit Center Frequency - 942.5 - MHz Maximum Insertion Loss 925 - 960 MHz 925 - 960 MHz (+10 to +35 oC) (-40 to +85 oC) 3.2 3.5 4.5 dB dB Absolute Attenuation 0 - 880 MHz 880 - 905 MHz 905 - 915 MHz 980 - 982 MHz 982 - 1005 MHz 1005 - 1025 MHz 1025 - 1035 MHz 1035 - 1760 MHz 1760 - 2500 MHz 2500 - 3000 MHz 38.5 42.8 42.8 dB dB dB dB dB dB dB dB dB dB Input/Output Return Loss 925 - 960 MHz 7.2 dB Source Impedance (4) - 50 - Ω Load Impedance (4) - 50 - Ω Notes: 1. All specifications are based on the test circuit shown below 2. In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over temperature 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances 4. This is the optimum impedance in order to achieve the performance shown Test Circuit: 50 Ω Single-ended 1,3,4,6 2 5 50 50Ω Ω No impedance matching required Subject to change or obsolescence without notice Rev C 13-Aug-2006 Page 2 of 5
Subject to change or obsolescence without notice Rev C 13-Aug-2006 Page 3 of 5 Typical Performance (at +25oC)
50 Ω Single-ended 1,3,4,6 2 5 50 50Ω Ω No impedance matching required Marking PCB Footprint Marking code Date code F JJJYM logo ID dot Sawtek .963.20 SQ 1.27 .38 .81 1.70 The date code consists of: JJJ = Julian day, Y = last digit of year, M = manufacturing site code This footprint represents a recommendation only Dimensions shown are nominal in millimeters Tape and Reel 3.25 Section A-A 1.75 Ø1.5 4.0 A 12.05.5 Ø1.54.0 2.0 3.25 1.4 0.21 A Ø102 Ø20.2 Ø13.0
2.0 Direction of travel
Ø330 12.8 2.7 logo Sawtek ID dot Dimensions shown are nominal in millimeters Packaging quantity: 5000 units/reel Subject to change or obsolescence without notice Rev C 13-Aug-2006 Page 4 of 5
Parameter Symbol Minimum Maximum Unit Operating Temperature Range T -40 +85 oC Storage Temperature Range Tstg -40 +85 oC Important Notes Warnings
- Electrostatic Sensitive Device (ESD)
- Avoid ultrasonic exposure RoHS Compliance
- This product complies with EU directive 2002/95/EC (RoHS) Solderability
- Compatible with JEDEC J-STD-020C Pb-free process, 260°C peak reflow temperature (see soldering profile) Links to Additional Technical Information PCB Layout Tips Qualification Flowchart S-Parameters RoHS Information TriQuint’s liability is limited only to the Surface Acoustic Wave (SAW) component(s) described in this data sheet. TriQuint does not accept any liability for applications, processes, circuits or assemblies, which are implemented using any TriQuint component described in this data sheet. Contact Information PO Box 609501 Orlando, FL 32860-9501 USA Phone: +1 (407) 886-8860 Fax: +1 (407) 886-7061 Email: info-product@tqs.com Web: www.triquint.com Or contact one of our worldwide Network of sales offices, Representatives or distributors Pb Soldering Profile Other Technical Information Subject to change or obsolescence without notice Rev C 13-Aug-2006 Page 5 of 5