855770 TRIQUINT | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

Features

  • For WCDMA applications
  • Usable bandwidth of 5 MHz
  • Low loss
  • Single-ended operation
  • Ceramic Surface Mount Package (SMP)
  • Small size Package Pin Configuration Surface Mount 5.00 x 5.00 x 1.32 mm Bottom View 765 321 Pin No. Description

2 Input

3 Input return

6 Output

7 Output return

1,4,5,8 Case ground 1.32 NOM. 1.52 MAX. 0.66 1.27 1.27 0.642.08 5.00 5.00 Dimensions shown are nominal in millimeters All tolerances are ±0.15mm except overall length and width ±0.15/±0.10mm Body: Al2O3 ceramic Lid: Kovar, Ni plated Terminations: Au plating 0.5 - 1.0µm, over a 2 - 6µm Ni plating

190 MHz SAW Filter

Subject to change or obsolescence without notice Rev - 08-Jan-2002 Page 2 of 5 Electrical Specifications (1) Operating Temperature Range: (2) -30 to +70 oC Parameter (3) Minimum Typical Maximum Unit Center Frequency, f0 - 190 - MHz Insertion Loss at 190 MHz - 8 10 dB Lower 5 dB Bandedge (4) Upper 5 dB Bandedge 192.4 187.23 193.01 187.6 MHz MHz Phase Ripple 188 - 192 MHz 1.90 4.15 deg RMS Attenuation (4) 160 - 170 MHz 170 - 180 MHz 180 - 185.5 MHz 194.5 - 200 MHz 200 - 210 MHz 210 - 220 MHz 39.9 35.4 30.3 29.5 34.9 42.7 dB dB dB dB dB dB Source Impedance (5) - 50 - Ω Load Impedance (5) - 50 - Ω Substrate Material - LiTaO 3 Notes: 1. All specifications are based on the test circuit shown below 2. In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over temperature 3. Electrical margin has been built into the design to accoun t for the variations due to temperature drift and manufacturing tolerances 4. Relative to insertion loss at 190 MHz 5. This is the optimum impedance in order to achieve the performance shown Test Circuit: 50Ω Single-ended 1,3,4 5,7,8 50Ω 33pF 56nH 50Ω 1pF 1pF 47nH 33pF

Subject to change or obsolescence without notice Rev - 08-Jan-2002 Page 3 of 5 Typical Performance (at +25oC)

Subject to change or obsolescence without notice Rev - 08-Jan-2002 Page 4 of 5 Matching Schematics Actual matching values may vary due to PCB layout and parasitics 50Ω Single-ended 1,3,4 5,7,8 50Ω 33pF 56nH 50Ω 1pF 1pF 47nH 33pF Marking PCB Footprint Date code A JJJYM ID dot logo Sawtek code Marking 1.47 5.20 2.28 .84 1.47 .84 .43 .71 The date code consists of: JJJ = Julian day, Y = last digit of year, M = manufacturing site code This footprint represents a recommendation only Dimensions shown are nominal in millimeters Tape and Reel 12.0 Section A-A A A 0.3 1.8 5.25 5.25 Ø1.5 Ø1.58.0 4.0 2.0 5.5 1.75 2.7 Direction of travel Ø13.0 Ø20.2 Ø330 2.0 Ø102

12.8 ID dot

Dimensions shown are nominal in millimeters Packaging quantity: 4000 units/reel

Subject to change or obsolescence without notice Rev - 08-Jan-2002 Page 5 of 5 Maximum Ratings Parameter Symbol Minimum Maximum Unit Operating Temperature Range T -30 +70 oC Storage Temperature Range T stg -40 +85 oC Warnings

  • Electrostatic Sensitive Device (ESD)
  • Avoid ultrasonic exposure Links to Additional Technical Information PCB Layout Tips Qualification Flowchart Soldering Profile S-Parameters Other Technical Information Contact Information PO Box 609501 Orlando, FL 32860-9501 USA Phone: +1 (407) 886-8860 Fax: +1 (407) 886-7061 Email: custservice@sawtek.com Web: www.sawtek.com Or contact one of our worldwide network of sales offices, representatives or distributors