855693 TRIQUINT | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

Features

  • For PCS handset IF applications
  • Usable bandwidth of 1.260 MHz
  • Low loss
  • High attenuation at tones
  • Single-ended or balanced operation
  • Ceramic Surface Mount Package (SMP)
  • Small size Package Pin Configuration Surface Mount 5.51 x 7.01 x 1.63 mm Bottom View 89 7 321 Pin No. Description

4 Output

6 Output return

10 Input return

12 Input

3,9 Ground 1,2,5 Case Ground 7,8,11 Case Ground 1.63 NOM. 1.78 MAX. 5.51 0.76 1.14 1.271.70 0.79 1.27 7.01 Dimensions shown are nominal in millimeters All tolerances are ±0.15mm except overall length and width ±0.13mm Body: Al2O3 ceramic Lid: Kovar, Ni plated Terminations: Au plating 0.5 - 1.0µm, over a 2 - 6µm Ni plating

220.38 MHz SAW Filter

Subject to change or obsolescence without notice Rev - 28-Feb-2002 Page 2 of 5 Electrical Specifications (1) Operating Temperature Range: (2) -30 to +80 oC Parameter (3) Minimum Typical Maximum Unit Center Frequency, f0 - 220.38 - MHz Insertion Loss at 220.38 MHz - 7.2 9 dB Lower 5 dB Point Upper 5 dB Point 221.01 219.64 221.20 219.75 MHz MHz Lower 33 dB Point Upper 33 dB Point 219.13 219.29 221.55 221.63 MHz MHz Amplitude Variation 220.08 - 220.68 MHz 0.5 1.2 dB p-p Phase Ripple 219.765 - 220.995 MHz 2.1 3.5 deg RMS Attenuation(4)

219.13 MHz (+25 oC)

221.63 MHz (+25 oC)

218.33 MHz

222.43 MHz

Source Impedance (5) - 50 - Ω Load Impedance (5) - 50 - Ω Notes: 1. All specifications are based on the test circuit shown below 2. In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over temperature 3. Electrical margin has been built into the design to accoun t for the variations due to temperature drift and manufacturing tolerances 4. Relative to insertion loss at 220.38 MHz 5. This is the optimum impedance in order to achieve the performance shown Test Circuit: Actual matching values may vary due to PCB layout and parasitics 50Ω Single-ended 1,2,3,5,6 7,8,9,10,11 50Ω 27nH 12 4 30nH 50Ω12nH 12nH

Subject to change or obsolescence without notice Rev - 28-Feb-2002 Page 3 of 5 Typical Performance (at +25oC)

Subject to change or obsolescence without notice Rev - 28-Feb-2002 Page 4 of 5 Matching Schematics Actual matching values may vary due to PCB layout and parasitics 50Ω Single-ended 1,2,3,5,6 7,8,9,10,11 50Ω 27nH 12 4 30nH 50Ω12nH 12nH Marking PCB Footprint Date code855693 SAWTEK ID dot XXXXXX 5.71 .99 7.21 1.34 1.34 .99 .28 .28 This footprint represents a recommendation only Dimensions shown are nominal in millimeters Tape and Reel Section A-A 0.3 2.2 7.3 5.8 Ø1.5 8.0 4.0 2.0 A AØ1.5 16.0 7.5 1.75 Pad 1 ID dot 2.0 Ø13.0 Ø20.2 Ø330 16.8 2.7 Direction of travelØ102 Dimensions shown are nominal in millimeters Packaging quantity: 3000 units/reel

Subject to change or obsolescence without notice Rev - 28-Feb-2002 Page 5 of 5 Maximum Ratings Parameter Symbol Minimum Maximum Unit Operating Temperature Range T -30 +80 oC Storage Temperature Range T stg -40 +85 oC Warnings

  • Electrostatic Sensitive Device (ESD)
  • Avoid ultrasonic exposure Links to Additional Technical Information PCB Layout Tips Qualification Flowchart Soldering Profile S-Parameters Other Technical Information Contact Information PO Box 609501 Orlando, FL 32860-9501 USA Phone: +1 (407) 886-8860 Fax: +1 (407) 886-7061 Email: custservice@sawtek.com Web: www.sawtek.com Or contact one of our worldwide network of sales offices, representatives or distributors