7630625 CLARKE | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 8
Technical content
Model No: CTT130 Part No: 7630625
Parts & Service: 020 8988 7400/E-mail:Parts@clarkeinternational.com or Service@clarkeinternational.com INTRODUCTION Thank you for purchasing this CLARKE Tool Trolley. Before attempting to assemble the trolley, be sure to read these instructions thoroughly. In doing so you will ensure the safety of yourself and that of others around you, and you can look forward to the trolley giving you long and satisfactory service. GUARANTEE This CLARKE product is guaranteed against faulty manufacture for a period of 12 months from the date of purchase. Please keep your receipt as proof of purchase. This guarantee is invalid if the product is found to have been abused or tampered with in any way, or not used for its intended purpose. Faulty goods should be returned to their place of purchase, no product can be returned to us without prior permission. This guarantee does not effect your statutory rights. SPECIFICATIONS erutaeF noitacificepS thgieWtcudorPg k7.62 yticapaCdaoLdetaRlatoTg k031 )HxWxL(snoisnemiDm m038x073x507 neposdilpothtiwnapsllarevOm m0021 tnemtrapmoCegarotSyarTpoTm m051x063x596
Parts & Service: 020 8988 7400/E-mail:Parts@clarkeinternational.com or Service@clarkeinternational.com UNPACKING & SAFETY PRECAUTIONS Carefully remove the trolley components from the packaging and check for any damage which may have occurred in transit. Before assembling, please check contents against the following list of loose items on page 4, and advise your Clarke dealer immediately if any parts are missing. The keys to the top drawer locks should be found taped inside the unit. TOOLS REQUIRED
- Screwdriver 19 mm wrench SAFETY PRECAUTIONS Do not leave the trolley unattended without the brakes being applied. Do not use on rough terrain. The trolley is designed for use on smooth level flooring. Do not allow children to play with or ride on the trolley. Do not leave the trolley on any steep inclines. Do not use the trolley if any of the castors are damaged; have them replaced immediately. Always ensure the load is favourably distributed, i.e. with heavy items on the lower storage levels. Do not stack objects on an open drawer. Not following these instructions could result in the trolley falling over, causing damage to the unit and/or serious personal injury. Always follow the safety cautions & warnings given on page 7.
Parts & Service: 020 8988 7400/E-mail:Parts@clarkeinternational.com or Service@clarkeinternational.com COMPONENT PARTS B C A EF DG H noitpircseD ytQ noitpircseD ytQ Ay lbmessAyarTreppU1 E l eehWrotsaCdexiF2 Bg eL4 F l eehWgnikcoL/gnilleviwS2 Ce ldnaH1 G s wercS0 3 Dy arTmottoB1 H t uN4
Parts & Service: 020 8988 7400/E-mail:Parts@clarkeinternational.com or Service@clarkeinternational.com ASSEMBLY STEP 1 Attach the wheels to the bottom tray using 4 nuts and tighten firmly. NOTE: Make sure you attach the same type of wheel (fixed/ swivelling) to the same end of the tray. (i.e.use only E at one end and F at the other) STEP 2 Attach the legs to the bottom tray using two screws per leg. Only tighten to a snug fit at this stage.
Parts & Service: 020 8988 7400/E-mail:Parts@clarkeinternational.com or Service@clarkeinternational.com STEP 3 STEP 4 Turn the upper tray upside down on a soft, smooth surface. Turn the bottom tray upside down and attach all four legs. Firmly tighten all the screws and turn the trolley upright. The handle can be attached to either side using two screws. Note: If the middle of the two fixing holes is used, the opening draw will be too close to the operators knuckles. Therefore, use the lower holes to provide suitable clearance.
Parts & Service: 020 8988 7400/E-mail:Parts@clarkeinternational.com or Service@clarkeinternational.com BEFORE USE The sliding top sections must be open before the tool draws can be opened. Close the sliding top sections before using the key provided to lock the drawers. Only one drawer can be opened at a time. DURING USE Close the top trays before locking with the key provided. The draws are held closed until the left-hand tray is opened. Always close the lid and the draws before moving the trolley. CAUTION: DO NOT PUT HEAVY OBJECTS ON THE EXTENDED TOP TRAYS WHEN THEY ARE FULLY OPEN. CAUTION: TAKE CARE OPENING A DRAWER IF HEA VY TOOLS ARE STORED INSIDE AS THIS COULD CREATE A RISK OF THE UNIT TIPPING OVER. CAUTION: ALWAYS APPLY THE BRAKES ON EACH REAR CASTER WHEN THE TOOL TROLLEY IS NOT BEING MOVED AROUND. TAKE EXTRA CARE WHEN MOVING THE UNIT AROUND IF THE FLOOR SURFACE IS NOT FLAT. WARNING: NEVER EXCEED THE MAX LOAD CAPACITY AS THIS COULD DAMAGE THE UNIT OR CAUSE PERSONAL INJURY. TOTAL TROLLEY LOAD = 130KG.