7610149 CLARKE | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com CAR RAMPS CR2000 & CR2500W Part Nos 7610149 and 7610153 INSTRUCTIONS FOR USE - (PLEASE KEEP) These ramps are suitable for most low ground clearance cars but check that car valance clears ramp when driving up. 1. Place ramps (and CR-EX1 extensions if used) on firm ground and only use in pairs. 2. Use on a hard level surface e.g. concrete. 3. Check the ramps are correctly in position before mounting. 4. Ensure tyres are fully inflated. 5. Use only as a pair - front or rear wheels - not one side of the vehicle. 6. Take great care to drive up centrally.
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com 7. Take extra care with 3-wheeled vehicles/trailers. 8. After mounting, apply handbrake and chock wheels.
- A slight set may occur in the ramps on first use, this will not impair the future use of the product. SPECIFICATIONS GUARANTEE This CLARKE product is guaranteed against faulty manufacture for a period of 12 months from the date of purchase. Please keep your receipt as proof of purchase. This guarantee is invalid if the product is found to have been abused or tampered with in any way, or not used for the purpose for which it was intended. Faulty goods should be returned to their place of purchase, no product can be returned to us without prior permission. This guarantee does not effect your statutory rights. CR2000 CRW2500W Capacity per pair (Max- Gross Vehicle Weight) 2000kg (2 Tonne) 2500kg (2.5 tonne) Construction 20x20/25x25 angle 25mm x 25mm angle Dimensions (Per Ramp) 800mm x 220mm x 240mm 800mm x 220mm x 240mm Platform width 180mm 205mm Approx platform height 180 mm 190 mm Weight (per pair) 9.5kg 10.5kg