74LS175

DM74LS174 FAIRCHILD | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 7

Technical content

Features

■ DM74LS174 contains six flip-flops with single-rail outputs ■ DM74LS175 contains four flip-flops with double-rail outputs ■ Buffered clock and direct clear inputs ■ Individual data input to each flip-flop ■ Applications include: Buffer/storage registers Shift registers Pattern generators ■ Typical clock frequency 40 MHz ■ Typical power dissipation per flip-flop 14 mW Ordering Code: Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code. Connection Diagrams DM74LS174 DM74LS175 Order Number Package Number Package Description DM74LS174M M16A 16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150 Narrow DM74LS174SJ M16D 16-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide DM74LS174N N16E 16-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide DM74LS175M M16A 16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150 Narrow DM74LS175SJ M16D 16-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide DM74LS175N N16E 16-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide

www.fairchildsemi.com 2 DM74LS174 • DM74LS175 Function Table (Each Flip-Flop) H = HIGH Level (steady state) L = LOW Level (steady state) X = Don't Care ↑ = Transition from LOW-to-HIGH level Q 0 = The level of Q before the indicated steady-state input conditions were established. † = DM74LS175 only Logic Diagrams DM74LS174 DM74LS175 Inputs Outputs Clear Clock D Q Q † LX X LH H ↑ HH L H ↑ LL H HL X Q 0 Q 0

3 www.fairchildsemi.com DM74LS174 • DM74LS175 Absolute Maximum Ratings(Note 1) Note 1: The “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the absolute maximum ratings. The “Recommended Operating Conditions” table will define the conditions for actual device operation. DM74LS174 Recommended Operating Conditions Note 2: C L = 15 pF , RL = 2 kΩ , TA = 25°C and VCC = 5V. Note 3: C L = 50 pF , RL = 2 kΩ , TA = 25°C and VCC = 5V. Note 4: TA = 25°C and VCC = 5V. over recommended operating free air temperature range (unless otherwise noted) Note 5: All typicals are at VCC = 5V, TA = 25°C. Note 6: Not more than one output should be shorted at a time, and the duration should not exceed one second. Note 7: With all outputs OPEN and 4.5V applied to all data and clear inputs, ICC is measured after a momentary ground, then 4.5V applied to the clock. Supply Voltage 7V Input Voltage 7V Operating Free Air Temperature Range 0°C to +70°C Storage Temperature Range −65°C to +150°C Symbol Parameter Min Nom Max Units V CC Supply Voltage 4.75 5 5.25 V VIH HIGH Level Input Voltage 2 V VIL LOW Level Input Voltage 0.8 V IOH HIGH Level Output Current −0.4 mA IOL LOW Level Output Current 8 mA fCLK Clock Frequency (Note 2) 0 30 MHz fCLK Clock Frequency (Note 3) 0 25 MHz tW Pulse Width Clock 20 ns(Note 4) Clear 20 tSU Data Setup Time (Note 4) 20 ns tH Data Hold Time (Note 4) 0 ns tREL Clear Release Time (Note 4) 25 ns TA Free Air Operating Temperature 0 70 °C Symbol Parameter Conditions Min Typ Max Units (Note 5) VI Input Clamp Voltage V CC = Min, II = −18 mA −1.5 V VOH HIGH Level V CC = Min, IOH = Max 2.7 3.4 V Output Voltage V IL = Max, VIH = Min VOL LOW Level V CC = Min, IOL = Max 0.35 0.5 Output Voltage V IL = Max, VIH = Min V IOL = 4 mA, VCC = Min 0.25 0.4 II Input Current @ Max Input Voltage VCC = Max, VI = 7V 0.1 mA IIH HIGH Level Input Current V CC = Max, VI = 2.7V 20 µA IIL LOW Level V CC = Max Clock −0.4 Input Current V I = 0.4V Clear −0.4 mA Data −0.36 IOS Short Circuit Output Current V CC = Max (Note 6) −20 −100 mA ICC Supply Current V CC = Max (Note 7) 16 26 mA

www.fairchildsemi.com 4 DM74LS174 • DM74LS175 DM74LS174 Switching Characteristics at VCC = 5V and TA = 25°C From (Input) R L = 2 kΩ Symbol Parameter To (Output) C L = 15 pF C L = 50 pF Units Min Max Min Max fMAX Maximum Clock Frequency 30 25 MHz tPLH Propagation Delay Time Clock to Output 30 32 ns LOW-to-HIGH Level Output tPHL Propagation Delay Time Clock to Output 30 36 ns HIGH-to-LOW Level Output tPHL Propagation Delay Time Clear to Output 35 42 ns HIGH-to-LOW Level Output

5 www.fairchildsemi.com DM74LS174 • DM74LS175 DM74LS175 Recommended Operating Conditions Note 8: C L = 15 pF , RL = 2 kΩ , TA = 25°C and VCC = 5V. Note 9: C L = 50 pF , RL = 2 kΩ , TA = 25°C and VCC = 5V. Note 10: TA = 25°C and VCC = 5V. over recommended operating free air temperature range (unless otherwise noted) Note 11: All typicals are at VCC = 5V, TA = 25°C. Note 12: Not more than one output should be shorted at a time, and the duration should not exceed one second. Note 13: With all outputs OPEN and 4.5V applied to all data and clear inputs, ICC is measured after a momentary ground, then 4.5V applied to the clock input. DM74LS175 Switching Characteristics at VCC = 5V and TA = 25°C (See Section 1 for Test Waveforms and Output Load) Symbol Parameter Min Nom Max Units VCC Supply Voltage 4.75 5 5.25 V VIH HIGH Level Input Voltage 2 V VIL LOW Level Input Voltage 0.8 V IOH HIGH Level Output Current −0.4 mA IOL LOW Level Output Current 8 mA fCLK Clock Frequency (Note 8) 0 30 MHz fCLK Clock Frequency (Note 9) 0 25 MHz tW Pulse Width Clock 20 ns (Note 10) Clear 20 tSU Data Setup Time (Note 10) 20 ns tH Data Hold Time (Note 10) 0 ns tREL Clear Release Time (Note 10) 25 ns TA Free Air Operating Temperature 0 70 °C Symbol Parameter Conditions Min Typ Max Units (Note 11) VI Input Clamp Voltage V CC = Min, II = −18 mA −1.5 V VOH HIGH Level V CC = Min, IOH = Max 2.7 3.4 V Output Voltage V IL = Max, VIH = Min VOL LOW Level V CC = Min, IOL = Max 0.35 0.5 Output Voltage V IL = Max, VIH = Min V IOL = 4 mA, VCC = Min 0.25 0.4 II Input Current @ Max Input Voltage VCC = Max, VI = 7V 0.1 mA IIH HIGH Level Input Current V CC = Max, VI = 2.7V 20 µA IIL LOW Level V CC = Max Clock −0.4 Input Current V I = 0.4V Clear −0.4 mA Data −0.36 IOS Short Circuit Output Current V CC = Max (Note 12) −20 −100 mA ICC Supply Current V CC = Max (Note 13) 11 18 mA From (Input) R L = 2 kΩ Symbol Parameter To (Output) C L = 15 pF C L = 50 pF Units Min Max Min Max fMAX Maximum Clock Frequency 30 25 MHz tPLH Propagation Delay Time Clock to Q or Q 30 32 ns LOW-to-HIGH Level Output tPHL Propagation Delay Time Clock to Q or Q 30 36 ns HIGH-to-LOW Level Output tPLH Propagation Delay Time Clear to Q 25 29 ns LOW-to-HIGH Level Output tPHL Propagation Delay Time Clear to Q 35 42 ns HIGH-to-LOW Level Output

www.fairchildsemi.com 6 DM74LS174 • DM74LS175 Physical Dimensions inches (millimeters) unless otherwise noted 16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150 Narrow Package Number M16A

7 www.fairchildsemi.com DM74LS174 • DM74LS175 Hex/Quad D-Type Flip-Flops with Clear Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 16-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide Package Number N16E Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be rea- sonably expected to result in a significant injury to the user. 2. A critical component in any component of a life support device or system whose failure to perform can be rea- sonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. www.fairchildsemi.com