74LS125 SOLIDSTATE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 5

Technical content

DM74LS125A Quad 3-STATE Buffer 74LS125 Quad 3-STATE Buffer General Description This device contains four independent gates each of which performs a non-inverting buffer function. The outputs have the 3-STATE feature. When enabled, the outputs exhibit the low impedance characteristics of a standard LS output with additional drive capability to permit the driving of bus lines without external resistors. When disabled, both the output transistors are turned off presenting a high-imped- ance state to the bus line. Thus the output will act neither as a significant load nor as a driver. To minimize the possi- bility that two outputs will attempt to take a common bus to opposite logic levels, the disable time is shorter than the enable time of the outputs. Ordering Code: Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code. Connection Diagram Function Table Y = A H = HIGH Logic Level L = LOW Logic Level X = Either LOW or HIGH Logic Level Hi-Z = 3-STATE (Outputs are disabled) Order Number Package Number Package Description DM74LS125AM M14A 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-120, 0.150 Narrow DM74LS125ASJ M14D 14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide DM74LS125AN N14A 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide Inputs Output ACY LLL HLH X H Hi-Z www.sycelectronica.com.ar

Absolute Maximum Ratings(Note 1) Note 1: The “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the absolute maximum ratings. The “Recommended Operating Conditions” table will define the conditions for actual device operation. Recommended Operating Conditions

Electrical Characteristics

over recommended operating free air temperature range (unless otherwise noted) Note 2: All typicals are at VCC = 5V, TA = 25°C. Note 3: Not more than one output should be shorted at a time, and the duration should not exceed one second. Note 4: ICC is measured with the data control (C) inputs at 4.5V and the data inputs grounded. Switching Characteristics at VCC = 5V and TA = 25°C Note 5: C L = 5pF. Supply Voltage 7V Input Voltage 7V Operating Free Air Temperature Range 0°C to +70°C Storage Temperature Range −65°C to +150°C Symbol Parameter Min Nom Max Units V CC Supply Voltage 4.75 5 5.25 V VIH HIGH Level Input Voltage 2 V VIL LOW Level Input Voltage 0.8 V IOH HIGH Level Output Current −2.6 mA IOL LOW Level Output Current 24 mA TA Free Air Operating Temperature 0 70 °C Symbol Parameter Conditions Min Typ Max Units (Note 2) VI Input Clamp Voltage V CC = Min, II = −18 mA −1.5 V VOH HIGH Level V CC = Min, IOH = Max 2.4 3.4 V Output Voltage V IL = Max, VIH = Min VOL LOW Level V CC = Min, IOL = Max 0.35 0.5 Output Voltage V IL = Max V IOL = 12 mA, VCC = Min 0.25 0.4 II Input Current @ Max Input Voltage VCC = Max, VI = 7V 0.1 mA IIH HIGH Level Input Current V CC = Max, VI = 2.7V 20 µA IIL LOW Level Input Current V CC = Max, VI = 0.4V −0.4 mA IOZH Off-State Output Current with V CC = Max, VO = 2.4V 20 µA HIGH Level Output Voltage Applied VIH = Min, VIL = Max IOZL Off-State Output Current with V CC = Max, VO = 0.4V −20 µA LOW Level Output Voltage Applied VIH = Min, VIL = Max IOS Short Circuit Output Current V CC = Max (Note 3) −20 −100 mA ICC Supply Current V CC = Max (Note 4) 11 20 mA R L = 667Ω Symbol Parameter C L = 50 pF C L = 150 pF Units Min Max Min Max tPLH Propagation Delay Time LOW-to-HIGH Level Output 15 21 ns tPHL Propagation Delay Time HIGH-to-LOW Level Output 18 22 ns tPZH Output Enable Time to HIGH Level Output 25 35 ns tPZL Output Enable Time to LOW Level Output 25 40 ns tPHZ Output Disable Time from HIGH Level Output (Note 5) 20 ns tPLZ Output Disable Time from LOW Level Output (Note 5) 20 ns www.sycelectronica.com.ar

Physical Dimensions inches (millimeters) unless otherwise noted 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-120, 0.150 Narrow Package Number M14A www.sycelectronica.com.ar

Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide Package Number M14D www.sycelectronica.com.ar

DM74LS125A Quad 3-STATE Buffer Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide Package Number N14A www.sycelectronica.com.ar