740-066971-C ATGBICS
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 6
Technical content
ATGBICS® All rights reserved. EOE Ref: ATGBICS_740-066971-C_V1 Page 1 of 6 Product Datasheet 740-066971-C Juniper® Compatible 1G/10Gb/s SFP+ Active Optical Cable, Active, 15m
FEATURES
- Hot pluggable
- Bit rate support from 1G to 11.3Gbps
- Up to 100m by active optical cable with OM2/OM3 fiber
- Pre-terminated fiber cable
- Operating environment temperature 0 ~ 70℃
- Low power consumption
- SFP+ housing with enhanced EMI shielding
- Single 3.3V power supply
- Programmable EEPROM for serial identification
APPLICATIONS
- 10G Ethernet
- Applicable to 1G Ethernet
- 8G Fiber Channel
- Applicable to 4G / 2G / 1G Fiber Channel
- 10G Fiber Channel over Ethernet
- 1X QDR Infiniband
- Applicable to 1X DDR / 1x SDR Infiniband
- High-capacity IO with SFP+ interface
- Data center and in -rack connection
- Compliance
- SFF-8431 SFP+ Electrical MSA
- SFF-8432 SFP+ Mechanical MSA
- RoHS complaint
DESCRIPTION
ATGBICS SFP AOC cable assemblies are high-performance, cost effective I/O solutions for 10Gb Ethernet and 10G Fiber Channel applications. SFP+ active optical cables allow hardware manufacturers to achieve high port density, configurability, and utilization at a very low cost and to reduce power budget. The high- speed cable assemblies meet and exceed the performance and reliability requirements stipulated by Gigabit Ethernet and Fiber Channel industry standard.
ATGBICS® All rights reserved. EOE Ref: ATGBICS_740-066971-C_V1 Page 2 of 6 Product Datasheet Host Board Connector Pin (Top View) Note: 1. For detail information, please refer to SFF-8083 0.8mm Card Edge Connector for 8/10 Gbps
ATGBICS® All rights reserved. EOE Ref: ATGBICS_740-066971-C_V1 Page 3 of 6 Product Datasheet SFP+ Connector Pin Pin Symbol Logic Description Note
1 VeeT Module Transmitter Ground 1
2 Tx_Fault LVTTL-O Not supported. 3 3 Tx_Disable LVTTL-I Not supported. 3
4 SDA LVTTL-I/O 2-wire Serial Interface Data Line 2
5 SCL LVTTL-I/O 2-wire Serial Interface Clock 2
6 Mod_ABS Module Absent 2
7 RS0 LVTTL-I Not supported. 3 8 Rx_LOS LVTTL-O Not supported. 3 9 RS1 LVTTL-I Not supported. 3
10 VeeR Module Receiver Ground 1
11 VeeR Module Receiver Ground 1
12 RD- CML-O Receiver Inverted Data Output
13 RD+ CML-O Receiver Non-Inverted Data Output
14 VeeR Module Receiver Ground 1
15 VccR Module Receiver 3.3 V Supply 4 16 VccT Module Transmitter 3.3 V Supply 4
17 VeeT Module Transmitter Ground 1
18 TD+ CML-I Transmitter Non-Inverted Data Input
19 TD- CML-I Transmitter Inverted Data Input
20 VeeT Module Transmitter Ground 1
ATGBICS® All rights reserved. EOE Ref: ATGBICS_740-066971-C_V1 Page 4 of 6 Product Datasheet Notes: 1. Module circuit ground pins are isolated from the module chassis ground 2. Pull up to VccHost with 4.7k – 10k 3. No connection required 4. Power supply filtering circuit required Absolute Maximum Ratings Parameter Symbol Min Max Unit Storage Temperature Ts -40 +85 °C Operating Case Temperature Tc -40 +85 °C Operating Humidity RH 85 % Supply Voltage Vcc -0.5 3.6 V Note: Damage may occur if the transceiver is subjected to conditions beyond the limits. Recommended Operating Conditions Parameter Symbol Min Max Unit Operating Case Temperature Tc 0 +70 °C Supply Voltage Vcc 3.1 3.5 V Bit Rate BR 1 11.3 GB
ATGBICS® All rights reserved. EOE Ref: ATGBICS_740-066971-C_V1 Page 5 of 6 Product Datasheet Host PCB Layout
ATGBICS® All rights reserved. EOE Ref: ATGBICS_740-066971-C_V1 Page 6 of 6 Product Datasheet Recommended Power Supply Filter References: 1. SFF-8431 “Specifications for Enhanced Small Form Factor Pluggable Module SFP+” 2. SFF-8432 “Specification for Improved Pluggable Form factor” 3. SFF-8472 “Specification for Diagnostic Monitoring Interface for Optical Transceivers” Mechanical Drawing