HMC683LP6C HITTITE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 10

Technical content

Features

Electrical Specifications, TA = +25 °C, IF - 100 MHz, LO = 0 dBm Vcc1, 2 = Vcc_BAL1, 2 = Vcc_AMP1, 2 [1] = Vcc_IF1P, N = Vcc_IF2P, N = +5V, BIAS1, 2 = +2.5V Typical Applications Parameter min. typ. max. Units Frequency range, rF 700 - 1000 mHz Frequency range, Lo 570 - 900 mHz Frequency range, iF 60 - 500 mHz conversion Gain 5 7.5 dB noise Figure (ssB) 11 dB Lo to rF isolation 10 16 dB Lo to iF isolation 15 20 dB rF to iF isolation 19 28 dB iP3 (input) 23 dBm 1 dB compression ( input) 11 dBm channel to channel isolation 50 dB Lo Drive input Level (typical) -3 to +3 dBm supply current (icc) 420 520 mA [1] see Application c ircuit [2] Unless otherwise noted all measurements with low side L o & iF = 100 mHz. the Hmc683LP6c(e) is ideal for:

  • cellular/3G & Lte/wimAx/4G
  • Basestations & repeaters
  • Gsm, cDmA & oFDm
  • Dual Density receivers the Hmc683LP6c(e) is a high linearity, dual channel downconverter with integrated L o amplifier in a 6x6 smt QFn package covering 0.7 - 1.0 GHz. excellent input iP3 performance of +23 dBm for down conversion is provided for 3G & 4G Gsm /cDmA applications at an Lo drive of 0 dBm. with an input 1 dB compression of +11 dBm, the rF port will accept a wide range of input signal levels. conversion gain is 7.5 dB typical. the 60 - 500 mHz iF frequency response will satisfy various Gsm/cDmA receive frequency plans. High input iP3: +23 dBm conversion Gain: 7.5 dB Low Lo Drive: 0 dBm High channel isolation

40 Lead 6x6mm smt Package: 36mm 2

mixers - Downconverters - smt 9 - 2 For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC683LP6C / 683LP6CE v02.0808 HIGH IP3 DUAL CHANNEL DOWNCONVERTER w/ LO SWITCH, 0.7 - 1.0 GHz Single Channel: Conversion Gain vs. Temperature Single Channel: Isolation Single Channel: Return Loss Single Channel: Conversation Gain vs. LO Drive Single Channel: IF Bandwidth Single Channel: Input P1dB vs. Temperature +25 C +85 C -40 C CONVERSION GAIN (dB) FREQUENCY (GHz) -60 -50 -40 -30 -20 -10 RF/IF LO/RF LO/IF ISOLATION (dB) FREQUENCY (GHz) -3 dBm 0 dBm +3 dBm CONVERSION GAIN (dB) FREQUENCY (GHz) -30 -25 -20 -15 -10 RF1 LO1 LO_SEL 0V LO1 LO_SEL +5V RETURN LOSS (dB) FREQUENCY (GHz) -25 -20 -15 -10 IF Return Loss Conversion Gain RESPONSE (dB) FREQUENCY (GHz) +25 C +85 C -40 C P1dB (dBm) FREQUENCY (GHz)

mixers - Downconverters - smt 9 - 3 For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC683LP6C / 683LP6CE v02.0808 HIGH IP3 DUAL CHANNEL DOWNCONVERTER w/ LO SWITCH, 0.7 - 1.0 GHz Dual Channel: LO1 to LO2 Isolation [2] Single Channel: Input IP3 vs. LO Drive Single Channel: Input IP3 vs. Temperature Dual Channel: Channel to Channel Isolation [1] -70 -60 -50 -40 -30 -20 -10 0.7 0.8 0.9 1 1.1 ISOLATION (dBc) FREQUENCY (GHz) +25 C +85 C -40 C IP3 (dBm) FREQUENCY (GHz) -3 dBm 0 dBm +3 dBm IP3 (dBm) FREQUENCY (GHz) [1] For 900 mHz, rF1 = 900 mHz @ 0 dBm, rF2 = 901 mHz @ 0 dBm, L o = 800 mHz @ 0 dBm, iF2 terminated with 50 ohms. channel isolation is the dBc difference at iF1 port between the fundamental tone @ 100 mHz and the leakage tone @ 101 mHz. [2] For 900 mHz, Lo1 = 800 mHz @ 0 dBm, Lo2 = 799 mHz @ 0 dBm, L o1 is selected, rF1 = rF2 = 900 mHZ @ 0 dBm, iF2 terminated with 50 ohms. L o1-Lo2 isolation is the dBc difference measured at the iF1 port between the fundamental tone at 100 mHz and the leakage tone @ 101 mHz. -60 -50 -40 -30 -20 RF1 TO RF2 AT IFI RF2 TO RF1 AT IF2 ISOLATION (dBc) FREQUENCY (GHz) Noise Figure vs. Temperature +25 C +85 C -40 C NOISE FIGURE (dB) FREQUENCY (GHz)

mixers - Downconverters - smt 9 - 4 For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC683LP6C / 683LP6CE v02.0808 HIGH IP3 DUAL CHANNEL DOWNCONVERTER w/ LO SWITCH, 0.7 - 1.0 GHz +2RF -2LO Response vs. LO Drive [3]+2RF -2LO Response vs. Temperature [3] +3RF -3LO Response vs. LO Drive [3]+3RF -3LO Response vs. Temperature [3] -3 dBm 0 dBm +3 dBm +3RF-3LO RESPONSE (dBc) FREQUENCY (GHz) -3 dBm 0 dBm +3 dBm +2RF-2LO RESPONSE (dBc) FREQUENCY (GHz) +25 C +85 C -40 C +2RF-2LO RESPONSE (dBc) FREQUENCY (GHz) +25 C +85 C -40 C +3RF-3LO RESPONSE (dBc) FREQUENCY (GHz) [1] referenced to rF input Power @ 0 dBm

mixers - Downconverters - smt 9 - 5 For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC683LP6C / 683LP6CE v02.0808 HIGH IP3 DUAL CHANNEL DOWNCONVERTER w/ LO SWITCH, 0.7 - 1.0 GHz eLectrostAtic sensitive Device oBserve HAnDLinG PrecAUtions Absolute Maximum Ratings rF / iF input (vcc= +5v) +15 dBm Lo Drive (vcc= +5v) +6 dBm vcc (Lo or iF) 5.5v channel temperature 12.5°c continuous Pdiss ( t = 85°c) (derate 110.53 mw/°c above 85°c) 4.42 w thermal resistance (channel to ground paddle) 9.05 °c/w storage temperature -65 to 150°c operating temperature -40 to +85 °c Harmonics of LOMxN Spurious @ IF Port nLo mrF 0 1 2 3 4 0 xx 23 16 22 28 1 34 0 38 16 45 2 55 50 56 59 82 3 88 57 82 63 88 4 93 94 92 94 94 rF Freq. = 0.9 GHz @ -5 dBm Lo Freq. = 0.8 GHz @ 0 dBm All values in dBc below i F power level (1rF - 1Lo). nLo spur @ rF Port Lo Freq. (GHz) 1 2 3 4 0.6 17 33 36 37 0.7 15 25 34 39 0.8 17 24 33 30 0.9 20 26 35 25 1.0 21 28 41 54 1.1 23 29 53 57 Lo = 0 dBm All values in dBc below input L o level measured at r F port. Truth Table Lo_seL (v) Lo signal Path

0 Lo1

5 Lo2

Typical Supply Current vs. Vcc vcc icc (A) 4.75 390 5.00 420 5.25 450 Downconverter will operate over full voltage range shown above.

mixers - Downconverters - smt 9 - 6 For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com Outline Drawing notes: 1. PAcKAGe BoDY mAteriAL: Low stress inJection moLDeD PLAstic siLicA AnD siLicon imPreGnAteD. 2. LeAD AnD GroUnD PADDLe mAteriAL: coPPer ALLoY. 3. LeAD AnD GroUnD PADDLe PLAtinG: 100% mAtte tin. 4. Dimensions A re in incHes [miLLimeters]. 5. LeAD sPAcinG toLerAnce is non -cUmULAtive. 6. PAD BUrr LenGtH sHALL Be 0.15mm mAx. PAD BUrr HeiGHt sHALL Be 0.25mm mAx. 7. PAcKAGe wArP sHALL not exceeD 0.05mm 8. ALL GroUnD LeADs AnD GroUnD PADDLe mUst Be soLDereD to PcB rF GroUnD. 9. reFer to Hittite APPLicAtion note For sUGGesteD PcB LAnD PAttern. Part number Package Body m aterial Lead Finish msL rating Package marking [3] Hmc683LP6c Low stress injection m olded Plastic sn/Pb solder msL1 [1] H683 xxxx Hmc683LP6ce roHs-compliant Low s tress injection m olded Plastic 100% matte sn msL1 [2] H683 xxxx [1] max peak reflow temperature of 235 ° c [2] max peak reflow temperature of 260 ° c [3] 4-Digit lot number xxxx

Package Information

v02.0808 HIGH IP3 DUAL CHANNEL DOWNCONVERTER w/ LO SWITCH, 0.7 - 1.0 GHz

mixers - Downconverters - smt 9 - 7 For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC683LP6C / 683LP6CE v02.0808 HIGH IP3 DUAL CHANNEL DOWNCONVERTER w/ LO SWITCH, 0.7 - 1.0 GHz Pin number Function Description interface s chematic 1, 10 rF1, rF2 these are the rF inputs of the mixers. s ee application circuit for the off-chip matching components 2, 9 tAP1, tAP2 these are the center taps of the internal r F baluns. connect these pins to the A c ground via external capacitors. s ee application circuit. 3, 5, 8, 15, 16, 22, 23, 26 - 29, 35, 36 GnD these pins must be connected to r F ground. 4, 7 BiAs1, BiAs2 Bias pins for mixer cores. s ee application circuit for the nominal value. 6, 17, 18, 24, 33, 34 vcc1, vcc_BAL2, vcc_A mP2, vcc2, vcc_A mP1, vcc_BAL1 Power supply voltage pins. s ee application circuit for bypass capacitors required. 11, 20, 31, 40 n/c no connection required. t hese pins may be connected to r F GnD without affecting performance. 12, 39 inD1, inD2 current source inductors for i F amplifiers. 13, 14, 38, 37 iF2P, iF2n, iF1P, iF1n Differential i F outputs and D c bias for iF amplifiers. 19, 32 BiAs_ADJ1, BiAs_ADJ2 Adjusts Lo buffer amplifies current via external resistor. s ee application circuit. 21, 30 Lo2, Lo1 these are Lo inputs of the mixers. s ee application circuit for off-chip matching components.

25 Lo_seL

control voltage for L o1 or Lo2 selection. L o1 is selected when L o seL is set low. Lo2 is selected when Lo seL is set high. see application circuit and truth table for low and high voltage levels. Pin Descriptions

mixers - Downconverters - smt 9 - 8 For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com Evaluation PCB the circuit board used in the final application should use rF circuit design techniques. signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. the evaluation circuit board shown is available from Hittite upon request. HMC683LP6C / 683LP6CE v02.0808 HIGH IP3 DUAL CHANNEL DOWNCONVERTER w/ LO SWITCH, 0.7 - 1.0 GHz

mixers - Downconverters - smt 9 - 9 For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC683LP6C / 683LP6CE v02.0808 HIGH IP3 DUAL CHANNEL DOWNCONVERTER w/ LO SWITCH, 0.7 - 1.0 GHz item Description J1 - J6 PcB mount smA connector J7 - J10 2mm vertical m olex 8pc connector L1, L2 51 nH inductor, 0603 Pkg. L3 - L6 390 nH inductor, 0603 Pkg. L7, L8 5.1 nH inductor, 0402 Pkg. L9, L10 3.6 nH inductor, 0402 Pkg. c7, c8, c26, c38 22 pF capacitor, 0402 Pkg. c9, c10 10 nF capacitor, 0603 Pkg. c11, c17, c19, c24, c27, c29, c34, c37, c40, c48, c50 1 nF capacitor, 0402 Pkg. c12, c15, c16, c18, c20, c25, c28, c30, c35, c36, c39, c47, c49 0.1 µF capacitor, 0603 Pkg. c13, c14, c60 - c63 100 pF capacitor, 0402 Pkg. c21, c22, c32, c33 0.01 µF capacitor, 0402 Pkg. c51 - c59 0.47 µF capacitor, 0603 Pkg. r7, r8 330 ohm resistor, 0603 Pkg. t1, t2 1:1 transformer - tyco etc1-it U1 Hmc683LP6c(e) PcB [2] 118274 evaluation PcB [1] reference this number when ordering complete evaluation P cB [2] circuit Board m aterial: Arlon-25F r adn Fr4 List of Materials for Evaluation PCB 119926 [1]

mixers - Downconverters - smt 9 - 10 For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com Application Circuit HMC683LP6C / 683LP6CE v02.0808 HIGH IP3 DUAL CHANNEL DOWNCONVERTER w/ LO SWITCH, 0.7 - 1.0 GHz