HMC682LP6C HITTITE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 10

Technical content

Features

Electrical Specifications, TA = +25 °C, IF = 200 MHz, LO = 0 dBm Vcc1, 2 = Vcc_BAL1, 2 = Vcc_AMP1, 2 [1] = Vcc_IF1P, N = Vcc_IF2P, N = +5V, BIAS1, 2 = +2.5V Typical Applications Parameter min. typ. max. Units Frequency range, rF 1.7 - 2.2 GHz Frequency range, Lo 1.4 - 2.0 GHz Frequency range, iF 0.06 - 0.40 GHz conversion Gain 4 6 dB noise Figure (ssB) 12 dB Lo to rF isolation 17 25 dB Lo to iF isolation 15 22 dB rF to iF isolation 15 30 dB iP3 (input) 25 dBm 1 dB compression ( input) 15 dBm channel to channel isolation 55 dB Lo Drive input Level (typical) -3 to +3 dBm supply current (icc) 450 550 mA [1] see application circuit [2] Unless otherwise noted all measurements with low side L o & iF = 200 mHz. the Hmc682LP6c(e) is ideal for:

  • cellular/3G & Lte/wimAx/4G
  • Basestations & repeaters
  • Gsm, cDmA & oFDm
  • Dual Density receivers the Hmc682LP6c(e) is a high linearity, dual channel downconverter with integrated L o amplifier in a 6x6 smt QFn package covering 1.7 - 2.2 GHz. excellent input iP3 performance of +25 dBm for down conversion is provided for 3G & 4G Gsm /cDmA applications at an Lo drive of 0 dBm. with an input 1 dB compression of +15 dBm, the rF port will accept a wide range of input signal levels. conversion gain is 6 dB typical. the 60 - 400 mHz iF frequency response will satisfy various Gsm/cDmA receive frequency plans. High input iP3: +25 dBm conversion Gain: 6 dB Low Lo Drive: 0 dBm High channel isolation

40 Lead 6x6mm smt Package: 36mm 2

mixers - Downconverters - smt 9 - 2 For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com Single Channel: Conversion Gain vs. Temperature Single Channel: Isolation Single Channel: Return Loss Single Channel: Conversation Gain vs. LO Drive HMC682LP6C / 682LP6CE v00.0308 HIGH IP3 DUAL CHANNEL DOWNCONVERTER w/ LO SWITCH, 1.7 - 2.2 GHz +25 C +85 C -40 C CONVERSION GAIN (dB) FREQUENCY (GHz) -30 -25 -20 -15 -10 RF1 LO1 LO_SEL 0V LO1 LO_SEL +5V RETURN LOSS (dB) FREQUENCY (GHz) -3 dBm 0 dBm +3 dBm CONVERSION GAIN (dB) FREQUENCY (GHz) -45 -40 -35 -30 -25 -20 -15 RF/IF LO/RF LO/IF ISOLATION (dB) FREQUENCY (GHz) Single Channel: IF Bandwidth Single Channel: Input P1dB vs. Temperature +25 C +85 C -40 C P1dB (dBm) FREQUENCY (GHz) -20 -15 -10 IF Return Loss Conversion Gain RESPONSE (dB) FREQUENCY (GHz)

mixers - Downconverters - smt 9 - 3 For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC682LP6C / 682LP6CE v00.0308 HIGH IP3 DUAL CHANNEL DOWNCONVERTER w/ LO SWITCH, 1.7 - 2.2 GHz Dual Channel: LO1 to LO2 Isolation[2] Single Channel: Input IP3 vs. LO Drive Single Channel: Input IP3 vs. Temperature +25 C +85 C -40 C IP3 (dBm) FREQUENCY (GHz) -70 -60 -50 -40 -30 -20 -10 ISOLATION (dBc) FREQUENCY (GHz) -3 dBm 0 dBm +3 dBm IP3 (dBm) FREQUENCY (GHz) Dual Channel: Channel to Channel Isolation[1] [1] For 1900 mHz, rF1 = 1900 mHz @ 0 dBm, rF2 = 1901 mHz @ 0 dBm, Lo = 1700 mHz @ 0 dBm, iF2 terminated with 50 ohms. channel isolation is the dBc difference at iF1 port between the fundamental tone @ 200 m Hz and the leakage tone at 201 mHz. [2] For 1900 mHz, Lo1 = 1700 mHz @ 0 dBm, Lo2 = 1699 mHz @ 0 dBm, Lo1 is selected, rF1 = rF2 = 1900 mHZ @ 0 dBm, iF2 terminated with 50 o hms. Lo1-Lo2 isolation is the dBc difference measured at the i F1 port between the fundamental tone at 200 m Hz and the leakage tone at 201 mHz. -60 -50 -40 -30 -20 RF1 TO RF2 AT IFI RF2 TO RF1 AT IF2 ISOLATION (dBc) FREQUENCY (GHz) Noise Figure vs. Temperature +25 C +85 C -40 C NOISE FIGURE (dB) FREQUENCY (GHz)

mixers - Downconverters - smt 9 - 4 For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC682LP6C / 682LP6CE v00.0308 HIGH IP3 DUAL CHANNEL DOWNCONVERTER w/ LO SWITCH, 1.7 - 2.2 GHz +2RF -2LO Response vs. LO Drive [3]+2RF -2LO Response vs. Temperature [3] +3RF -3LO Response vs. LO Drive [3]+3RF -3LO Response vs. Temperature [3] [3] refernced to rF input power @ 0 dBm +25 C +85 C -40 C +3RF-3LO RESPONSE (dBc) FREQUENCY (GHz) -3 dBm 0 dBm +3 dBm +3RF-3LO RESPONSE (dBc) FREQUENCY (GHz) -3 dBm 0 dBm +3 dBm +2RF-2LO RESPONSE (dBc) FREQUENCY (GHz) +25 C +85 C -40 C +2RF-2LO RESPONSE (dBc) FREQUENCY (GHz)

mixers - Downconverters - smt 9 - 5 For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC682LP6C / 682LP6CE v00.0308 HIGH IP3 DUAL CHANNEL DOWNCONVERTER w/ LO SWITCH, 1.7 - 2.2 GHz Harmonics of LO MxN Spurious @ IF Port nLo mrF 0 1 2 3 4 0 xx 39 20 46 47 1 35 0 40 24 66 2 72 61 63 54 83 3 107 73 90 70 101 4 116 125 114 106 108 rF Freq. = 1.9 GHz @ -5 dBm Lo Freq. = 1.7 GHz @ 0 dBm All values in dBc below i F power level (1rF - 1Lo). nLo spur @ rF Port Lo Freq. (GHz) 1 2 3 4 1.4 25 29 38 19 1.5 24 28 31 21 1.6 25 23 30 21 1.7 26 19 38 14 1.8 29 16 43 16 1.9 31 15 40 19 2.0 32 14 43 22 Lo = 0 dBm All values in dBc below input L o level measured at r F port. Typical Supply Current vs. Vdd vcc icc (mA) 4.75 415 5.00 450 5.25 490 Downconverter will operate over full voltage range shown above. Truth Table Lo_seL (v) Lo signal Path

0 Lo1

5 Lo2

mixers - Downconverters - smt 9 - 6 For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com Outline Drawing Absolute Maximum Ratings rF / iF input (vcc= +5v) +15 dBm Lo Drive (vcc= +5v) +6 dBm vcc (Lo or iF) 5.5v channel temperature 12.5°c continuous Pdiss ( t = 85°c) (derate 110.53 mw/°c above 85°c) 4.42 w thermal resistance (channel to ground paddle) 9.05 °c/w storage temperature -65 to 150°c operating temperature -40 to +85 °c eLectrostAtic sensitive Device oBserve HAnDLinG PrecAUtions notes: 1. LeADFrAme mAteriAL: coPPer ALLoY 2. Dimensions A re in incHes [miLLimeters] 3. LeAD sPAcinG toLerAnce is non -cUmULAtive. 4. PAD BUrr LenGtH sHALL Be 0.15mm mAximUm. PAD BUrr HeiGHt sHALL Be 0.05mm mAximUm. 5. PAcKAGe wArP sHALL not exceeD 0.05mm. 6. ALL GroUnD LeADs AnD GroUnD PADDLe mUst Be soLDereD to PcB rF GroUnD. 7. reFer to Hittite APPLicAtion note For sUGGesteD LAnD PAttern. Part number Package Body m aterial Lead Finish msL rating Package marking [3] Hmc682LP6c Low stress injection m olded Plastic sn/Pb solder msL1 [1] H682 xxxx Hmc682LP6ce roHs-compliant Low s tress injection m olded Plastic 100% matte sn msL1 [2] H682 xxxx [1] max peak reflow temperature of 235 ° c [2] max peak reflow temperature of 260 ° c [3] 4-Digit lot number xxxx

Package Information

v00.0308 HIGH IP3 DUAL CHANNEL DOWNCONVERTER w/ LO SWITCH, 1.7 - 2.2 GHz

mixers - Downconverters - smt 9 - 7 For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC682LP6C / 682LP6CE v00.0308 HIGH IP3 DUAL CHANNEL DOWNCONVERTER w/ LO SWITCH, 1.7 - 2.2 GHz Pin number Function Description interface s chematic 1, 10 rF1, rF2 these are the rF inputs of the mixers. s ee application circuit for the off-chip matching components 2, 9 tAP1, tAP2 these are the center taps of the internal r F baluns. connect these pins to the A c ground via external capacitors. s ee application circuit. 3, 5, 8, 15, 16, 22, 23, 26 - 29, 36, 35 GnD these pins must be connected to r F ground. 4, 7 BiAs1, BiAs2 Bias pins for mixer cores. s ee application circuit for the nominal value. 6, 17, 18, 24, 33, 34 vcc1, vcc_BAL2, vcc_A mP2, vcc2, vcc_A mP1, vcc_BAL1 Power supply voltage pins. s ee application circuit for required external components. 11, 20, 31, 40 n/c no connection required. t hese pins may be connected to rF GnD without affecting performance. 12, 39 inD1, inD2 current source inductors for i F amplifiers. 13, 14, 38, 37 iF2P, iF2n, iF1P, iF1n Differential i F outputs and D c BiAs for iF Amps. 19, 32 BiAs_ADJ1, BiAs_ADJ2 Adjusts Lo buffer amplifies current via external resistor. s ee application circuit. 21, 30 Lo2, Lo1 these are Lo inputs of the mixers. s ee application circuit for off-chip matching components.

25 Lo_seL

control voltage for L o1 or Lo2 selection. L o1 is selected when L o seL is set low. Lo2 is selected when Lo seL is set high. see application circuit and truth table for low and high voltage levels. Pin Descriptions

mixers - Downconverters - smt 9 - 8 For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com Evaluation PCB the circuit board used in the final application should use rF circuit design techniques. signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. the evaluation circuit board shown is available from Hittite upon request. HMC682LP6C / 682LP6CE v00.0308 HIGH IP3 DUAL CHANNEL DOWNCONVERTER w/ LO SWITCH, 1.7 - 2.2 GHz

mixers - Downconverters - smt 9 - 9 For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC682LP6C / 682LP6CE v00.0308 HIGH IP3 DUAL CHANNEL DOWNCONVERTER w/ LO SWITCH, 1.7 - 2.2 GHz item Description J1 - J6 PcB mount smA connector J7 - J10 2mm vertical m olex 8pc connector L1, L2 51 nH inductor, 0603 Pkg. L3 - L6 390 nH inductor, 0603 Pkg. L7 - L10 2.2 nH inductor, 0402 Pkg. c7, c8, c26, c38 22 pF capacitor, 0402 Pkg. c9, c10 10 nF capacitor, 0603 Pkg. c11, c17, c19, c24, c27, c29, c34, c37, c40, c48, c50 1 nF capacitor, 0402 Pkg. c12, c15, c16, c18, c20, c25, c28, c30, c35, c36, c39, c47, c49 0.1 µF capacitor, 0603 Pkg. c13, c14, c60 - c63 100 pF capacitor, 0402 Pkg. c21, c22, c32, c33 0.01 µF capacitor, 0402 Pkg. c51 - c59 0.47 µF capacitor, 0603 Pkg. r7, r8 330 ohm resistor, 0603 Pkg. t1, t2 1:1 transformer - tyco etc1-1t U1 Hmc682LP6c(e) PcB [2] 118274 evaluation PcB [1] reference this number when ordering complete evaluation P cB [2] circuit Board m aterial: Arlon-25F r and Fr4 List of Materials for Evaluation PCB 119925 [1]

mixers - Downconverters - smt 9 - 10 For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com Application Circuit HMC682LP6C / 682LP6CE v00.0308 HIGH IP3 DUAL CHANNEL DOWNCONVERTER w/ LO SWITCH, 1.7 - 2.2 GHz