HMC668LP3 HITTITE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 10

Technical content

Features

The HmC668lp3(e) is a versatile, high dynamic range GaAs mmiC low Noise Amplifier that integrates a low loss lNA bypass mode on the iC. The amplifier is ide- al for receivers and lNA modules operating between 0.7 and 1.2 GHz and provides 0.9 dB noise figure, 16 dB of gain and +33 dBm ip3 from a single supply of +5V @ 57mA. input and output return losses are excellent and no external matching components are required. A single control line is used to switch be - tween lNA mode and a low loss bypass mode. The failsafe topology enables the lNA bypass path, when no DC power is available. The H mC668lp3(e) offers improved noise figure versus the previously released HmC373lp3(e). Noise figure: 0.9 dB output ip3: +33 dBm Gain: 16 dB failsafe operation: Bypass is enabled when l NA is unpowered single supply: +3V or +5V 16 lead 3x3mm QfN package: 9 mm Typical Applications The HmC668lp3(e) is ideal for:

  • Cellular/3G and lTe/wimAX/4G
  • BTs & infrastructure
  • repeaters and femtocells
  • Tower mounted Amplifiers
  • Test & measurement equipment Electrical Specifications, TA = +25° C, Rbias = 0 Ohm parameter lNA mode Bypass mode failsafe mode UnitsVdd = +3V Vdd = +5V Gain 12 15 13 16 -2.5 -1.5 -2.5 -1.5 dB Gain Variation o ver Temperature 0.03 0.016 0.0008 0.0008 dB / °C Noise figure 0.85 1.1 0.9 1.1 dB input return loss 12 13 12 12 dB output return loss 13 14 13 13 dB reverse isolation 22 23 - - dB power for 1dB Compression (p1dB)[1] 13 13 22 24 dBm Third order intercept (ip3)[2] 27 33 26 26 dBm supply Current ( idd) 32 40 57 70 0.05 - mA switching s peed (90% -10%) lNA mode to Bypass m ode Bypass mode to lNA mode 200 - ns ns85 85 [1] p1dB for lNA mode is referenced to rfo UT while p1dB for Bypass and failsafe modes are referenced to rfi N. [2] ip3 for lNA mode is referenced to rfo UT while ip3 for Bypass and f ailsafe modes are referenced to rfi N.

For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com Amplifiers - low Noise - smT 7 - 2 LNA - Gain vs. Temperature [1]LNA - Broadband Gain & Return Loss LNA - Gain vs. Temperature [2] HMC668LP3 / 668LP3E v03.0610 GaAs PHEMT MMIC LNA w/ FAILSAFE BYPASS MODE, 700 - 1200 MHz [1] Vdd = 5V [2] Vdd = 3V [3] measurement reference plane shown on evaluation p CB drawing. +25C +85C -40C FREQUENCY (GHz) GAIN (dB) -25 -20 -15 -10 Vdd=5V Vdd=3V FREQUENCY (GHz) RESPONSE (dB) S11 S21 S22 0.2 0.5 0.8 1.1 1.4 1.7 Vdd=5V Vdd=3V FREQUENCY (GHz) NOISE FIGURE (dB) +85C +25C -40C +25C +85C -40C FREQUENCY (GHz) GAIN (dB) LNA - Return Loss vs. Temperature [1] LNA - Noise Figure vs. Temperature [3] LNA - Output IP3 vs. Temperature, Output Power @ 0 dBm +25C +85C -40C IP3 (dBm) IP3 (dBm) Frequency (GHz) Vdd=5V Vdd=3V -25 -20 -15 -10 +25C +85C -40C FREQUENCY (GHz) RETURN LOSS (dB) Input Return Loss Output Return Loss

For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com Amplifiers - low Noise - smT 7 - 3 HMC668LP3 / 668LP3E v03.0610 GaAs PHEMT MMIC LNA w/ FAILSAFE BYPASS MODE, 700 - 1200 MHz LNA - Reverse Isolation vs. Temperature [1] LNA - Output P1dB vs. Temperature [2] LNA - Output P1dB, Gain & Noise Figure [3] vs. Vdd @ 900 MHz LNA - Output P1dB vs. Temperature [1] [1] Vdd = 5V [2] Vdd = 3V [3] measurement reference plane shown on evaluation p CB drawing. +25C +85C -40C FREQUENCY (GHz) P1dB (dBm) +25C +85C -40C FREQUENCY (GHz) P1dB (dBm) 0.6 0.7 0.8 0.9 1.1 3 3.5 4 4.5 5 P1dB Gain NF GAIN (dB) & P1dB (dBm) NOISE FIGURE (dB) Voltage Supply (V) -40 -35 -30 -25 -20 -15 -10 +25C +85C -40C FREQUENCY (GHz) ISOLATION (dB) LNA - Gain, P1dB, Output IP3 vs. Current [2] @ 900 MHz LNA - Gain, P1dB, Output IP3 vs. Current [1] @ 900 MHz 35 40 45 50 55 60 GAIN (dB) , P1dB (dBm) IP3 (dBm) Idd (mA) IP3 Gain P1dB 15 20 25 30 35 GAIN (dB) , P1dB (dBm) IP3 (dBm) Idd (mA) IP3 Gain P1dB

For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com Amplifiers - low Noise - smT 7 - 4 HMC668LP3 / 668LP3E v03.0610 GaAs PHEMT MMIC LNA w/ FAILSAFE BYPASS MODE, 700 - 1200 MHz Bypass Mode - Input IP3 vs. Output Power @ 900 MHz Bypass Mode - Broadband Gain & Return Loss Bypass Mode - Insertion Loss vs. Temperature Bypass Mode - Input IP3 vs. Temperature, Output Power @ 5 dBm +25C +85C -40C FREQUENCY (GHz) IP3 (dBm) +25C +85C -40C FREQUENCY (GHz) GAIN (dB) -10 -5 0 5 10 15 +25C +85C -40C Pout (dBm) IP3 (dBm) -20 -18 -16 -14 -12 -10 S21 S11 S22 FREQUENCY (GHz) RESPONSE (dB) Bypass Mode - Output Return Loss vs. Temperature Bypass Mode - Input Return Loss vs. Temperature -25 -20 -15 -10 +25C +85C -40C FREQUENCY (GHz) RETURN LOSS (dB) -20 -15 -10 +25C +85C -40C FREQUENCY (GHz) RETURN LOSS (dB)

For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com Amplifiers - low Noise - smT 7 - 5 HMC668LP3 / 668LP3E v03.0610 GaAs PHEMT MMIC LNA w/ FAILSAFE BYPASS MODE, 700 - 1200 MHz Failsafe Mode - Input IP3 vs. Output Power @ 900 MHz Failsafe Mode - Broadband Gain & Return Loss Failsafe Mode - Insertion Loss vs. Temperature Failsafe Mode - Output Return Loss vs. Temperature Failsafe Mode - Input Return Loss vs. Temperature Failsafe Mode - Input IP3 vs. Temperature, Output Power @ 5 dBm +25C +85C -40C FREQUENCY (GHz) IP3 (dBm) +25C +85C -40C FREQUENCY (GHz) GAIN (dB) -25 -20 -15 -10 +25C +85C -40C FREQUENCY (GHz) RETURN LOSS (dB) -20 -15 -10 +25C +85C -40C FREQUENCY (GHz) RETURN LOSS (dB) -10 -5 0 5 10 15 +25C +85C -40C Pout (dBm) IP3 (dBm) -20 -18 -16 -14 -12 -10 S21 S11 S22 FREQUENCY (GHz) RESPONSE (dB)

For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com Amplifiers - low Noise - smT 7 - 6 Absolute Maximum Ratings Truth Table eleCTrosTATiC seNsiTiVe DeViCe oBserVe HANDliNG preCAUTioNs Drain Bias Voltage (Vdd) +6 Vdc Control Voltage (Vctl) +6 Vdc rf input power (rfiN) lNA mode Bypass / failsafe mode +5 dBm +20 dBm Channel Temperature 150 °C Continuous pdiss (T = 85 °C) (derate 10.71 mw/°C above 85 °C) 0.70 w Thermal resistance (channel to ground paddle) 93.33 °C/ w storage Temperature -65 to +150° C operating Temperature -40 to +85° C esD sensitivity (HB m) Class 1A HMC668LP3 / 668LP3E v03.0610 GaAs PHEMT MMIC LNA w/ FAILSAFE BYPASS MODE, 700 - 1200 MHz Typical Supply Current vs. Vdd lNA mode Vctl = Vdd = 3 to 5V Bypass mode Vctl= 0V, Vdd = 3 to 5V failsafe mode Vctl = Vdd = N/C rbias Ω idd (mA) Vdd= 3V Vdd= 5V 0 32 57 15 26 49 47 20 37 180 [1] 10 20 [1] recommended maximum r bias

For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com Amplifiers - low Noise - smT 7 - 7 HMC668LP3 / 668LP3E v03.0610 GaAs PHEMT MMIC LNA w/ FAILSAFE BYPASS MODE, 700 - 1200 MHz Outline Drawing NoTes: 1. leADfrAme mATeriAl: Copper AlloY 2. DimeNsioNs Are iN iNCHes [millimeTers] 3. leAD spACiNG TolerANCe is NoN-CUmUlATiVe 4. pAD BUrr leNGTH sHAll Be 0.15mm mAXimUm. pAD BUrr HeiGHT sHAll Be 0.05mm mAXimUm. 5. pACKAGe wArp sHAll NoT eXCeeD 0.05mm. 6. All GroUND leADs AND GroUND pADDle mUsT Be solDereD To pCB rf GroUND. 7. refer To HiTTiTe AppliCATioN NoTe for sUGGesTeD lAND pATTerN. part Number package Body m aterial lead finish msl rating package marking [3] HmC668lp3 low stress injection m olded plastic sn/pb solder msl1 [1] 668 XXXX HmC668lp3e roHs-compliant l ow stress injection m olded plastic 100% matte sn msl1 [2] 668 XXXX [1] max peak reflow temperature of 235 °C [2] max peak reflow temperature of 260 °C [3] 4-Digit lot number XXXX

Package Information

For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com Amplifiers - low Noise - smT 7 - 8 Pin Descriptions pin Number function Description interface s chematic 1, 2, 4, 5, 8, 9, 11, 12, 13, 15 N/C No connection required. These pins may be connected to rf GND. p erformance will not be affected. 3 rfiN This pin is DC coupled. off-chip DC blocking capacitor required. 6 ACG AC Ground. Attach bypass capacitor per application circuit. 7 res external resistor pin for current control. s ee table for external resistor value vs. bias current data. 10 rfoUT This pin is matched to 50 o hms 14 Vdd power supply voltage pin. e xternal bypass capacitors required.

16 Vctl

Control voltage pin for l NA / Bypass modes. setting voltage equal to VDD enables l NA mode. external Bypass capacitor required. HMC668LP3 / 668LP3E v03.0610 GaAs PHEMT MMIC LNA w/ FAILSAFE BYPASS MODE, 700 - 1200 MHz

For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com Amplifiers - low Noise - smT 7 - 9 HMC668LP3 / 668LP3E v03.0610 GaAs PHEMT MMIC LNA w/ FAILSAFE BYPASS MODE, 700 - 1200 MHz Application Circuit

For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com Amplifiers - low Noise - smT 7 - 10 Evaluation PCB The circuit board used in the application should use rf circuit design techniques. signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. item Description J1 - J2 pCB mount smA Connector J3 - J4 DC pin C1 100 pf Capacitor, 0402 p kg. C2 8200 pf Capacitor, 0402 p kg. C3 10 nf Capacitor, 0603 p kg. C4 1 µf Capacitor, 0603 p kg. C5 100 pf Capacitor, 0603 p kg. l2 15 nH inductor, 0402 p kg. r1 0 ohm resistor, 0402 pkg. U1 HmC668lp3(e) Amplifier pCB [2] 118911 evaluation Board [1] reference this number when ordering complete evaluation p CB [2] Circuit Board m aterial: rogers 4350 List of Materials for Evaluation PCB 121922 [1] HMC668LP3 / 668LP3E v03.0610 GaAs PHEMT MMIC LNA w/ FAILSAFE BYPASS MODE, 700 - 1200 MHz