HMC665LP4 HITTITE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 10
Technical content
Features
The HMC665LP4e is a highly integrated converter iC that operates from 0.7 to 1.2 GHz for both up-conversion and downconversion applications. The HMC665LP4 e incorporates a high dynamic range, passive double- balanced mixer core with integrated LO and iF amplifiers, making it ideal for compact transceiver applications in Gs M, WCDMA, TD- sCDMA, WiBro and WiMA x. This versatile converter rFiC operates with a low LO input power level of only -3 dBm, provides up to 10 dB conversion gain, and exhibits +23 dBm input iP3 in downconversion mode. This rFiC provides up to 11 dB conversion gain in upconverter mode. specific evaluation boards are available for both upconverter and downconverter modes. High input iP3: +23 dBm Low input LO Drive: -3 to +6 dBm High LO to rF isolation: 36 dB High Conversion Gain: 10 dB ideal for Upconversion or Downconversion
24 Lead 4x4mm sMT Package: 16mm
Electrical Specifications, TA = +25° C, LO = 0 dBm, VccLO= VddIF = +5V Typical Applications The HMC665LP4 / HMC665LP4e is ideal for:
- Cellular/3G & WiMAx/LTe/4G infrastructure
- Base stations & repeaters
- Broadband & Fixed Wireless
- Access Points
- Test & Measurement equipment Parameter Min. Typ. Max. Units Frequency range, rF, LO 0.7 - 1.2 GHz Frequency range, iF 250 - 450 MHz Conversion Gain 7 10 dB Noise Figure (ssB) 10 dB LO to rF isolation 32 36 dB LO to iF isolation 1 dB iP3 (input) 23 dBm 1 dB Compression ( input) 10 dBm LO Drive input Level (Typical) -3 to +6 dBm supply Current ( iddiF + iccLO) 150 200 mA *Unless otherwise noted, all measurements performed as a downconverter and configured as shown in the downconverter mode application circuit, IF=250 MHz
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com Mixers - HiGH iP3 - sMT 10 - 2 Conversion Gain vs. LO Drive, IF = 250 MHz Input IP2 vs. LO Drive, IF = 450 MHz Input IP2 vs. Temperature, IF = 450 MHz HMC665LP4 / 665LP4E v00.0508 GaAs MMIC MIXER w/ INTEGRATED IF & LO AMPLIFIER, 0.7 - 1.2 GHz Downconversion Plots Conversion Gain vs. LO Drive, IF = 450 MHz Conversion Gain vs. Temperature, IF = 250 MHz Conversion Gain vs. Temperature, IF = 450 MHz -15 -10 500 700 900 1100 1300 1500 LO= -3 dBm LO= 0 dBm LO= 3 dBm LO= 6 dBm CONVERSION GAIN (dB) FREQUENCY (MHz) -15 -10 500 700 900 1100 1300 1500 LO= -3 dBm LO= 0 dBm LO= 3 dBm LO= 6 dBm CONVERSION GAIN (dB) FREQUENCY (MHz) -20 -15 -10 500 700 900 1100 1300 1500 +25C +85C -40C CONVERSION GAIN (dB) FREQUENCY (MHz) -20 -15 -10 500 700 900 1100 1300 1500 +25C +85C -40C CONVERSION GAIN (dB) FREQUENCY (MHz) 500 700 900 1100 1300 -3 dBm 0 dBm +3 dBm +6 dBm IP2 (dBm) RF FREQUENCY (MHz) 500 700 900 1100 1300 +25C +85C -40C IP2 (dBm) RF FREQUENCY (MHz)
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com Mixers - HiGH iP3 - sMT 10 - 3 HMC665LP4 / 665LP4E v00.0508 GaAs MMIC MIXER w/ INTEGRATED IF & LO AMPLIFIER, 0.7 - 1.2 GHz Downconversion Plots Input P1dB vs. Temperature, IF = 350 MHz Input IP3 vs. LO Drive, IF = 450 MHz Input IP3 vs. Temperature, IF = 450 MHz Upconversion Plots Conversion Gain vs. LO Drive, IF = 250 MHz Conversion Gain vs. LO Drive, IF = 450 MHz 500 700 900 1100 1300 -3 dBm 0 dBm +3 dBm +6 dBm IP3 (dBm) RF FREQUENCY (MHz) 500 700 900 1100 1300 +25C +85C -40C IP3 (dBm) RF FREQUENCY (MHz) -15 -10 650 825 1000 1175 1350 LO= -3 dBm LO= 0 dBm LO= 3 dBm LO= 6 dBm CONVERSION GAIN (dB) FREQUENCY (MHz) -15 -10 650 825 1000 1175 1350 LO= -3 dBm LO= 0 dBm LO= 3 dBm LO= 6 dBm CONVERSION GAIN (dB) FREQUENCY (MHz) 500 700 900 1100 1300 +25C +85C -40C P1dB (dBm) RF FREQUENCY (MHz) Isolation vs. Frequency -40 -30 -20 -10 500 700 900 1100 1300 1500 1700 RF to IF LO to RF LO to IF ISOLATION (dB) FREQUENCY (MHz)
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com Mixers - HiGH iP3 - sMT 10 - 4 Input IP2 vs. LO Drive, IF = 450 MHz Input IP3 vs. LO Drive, IF = 450 MHz 650 800 950 1100 1250 LO = -3 dBm LO = 0 dBm LO = 3 dBm LO = 6 dBm IP2 (dBm) RF FREQUENCY (MHz) -15 -10 650 800 950 1100 1250 -3 dBm 0 dBm +3 dBm +6 dBm IP3 (dBm) RF FREQUENCY (MHz) HMC665LP4 / 665LP4E v00.0508 GaAs MMIC MIXER w/ INTEGRATED IF & LO AMPLIFIER, 0.7 - 1.2 GHz IF Bandwidth Return Loss -35 -30 -25 -20 -15 -10 200 300 400 500 600 Conversion Gain Return Loss RESPONSE (dB) IF FREQUENCY (MHz) -30 -25 -20 -15 -10 0 0.5 1 1.5 2 2.5 3 RF LO RETURN LOSS (dB) FREQUENCY (MHz) Harmonics of LOMxN Spurious @ IF Port nLO spur at rF Port LO Freq. (GHz) 1 2 3 4 0.5 31 32 32 39 0.6 28 23 32 47 0.7 30 21 30 44 0.8 37 21 32 47 0.9 38 23 37 53 1.0 35 24 40 43 1.2 34 27 33 55 1.4 35 32 33 58 1.6 36 38 46 62.6 LO = 0 dBm Values in dBc below input LO level measured at r F port. nLO mrF 0 1 2 3 4 0 xx 3 21 29 58 1 7 0 33 52 59 2 66 56 50 65 84 3 91 84 73 77 91 4 91 91 91 91 91 All values in dBc below i F power level (1rF - 1LO) Typical Supply Current VddiF + VccLO iddiF + iccLO +4.5 130 mA +5.0 150 mA +5.5 165 mA Absolute Maximum Ratings rF / Mix iF input (VddiF = +5V) +22 dBm LO input (VccLO = +5V) +10 dBm iFiN +15 dBm VccLO +7 Vdc VddiF +8 Vdc Junction Temperature 150 °C Continuous Pdiss (T = 85 °C) (derate 14.9 mW/°C above 85°C) 0.97 W Thermal resistance (junction to ground paddle) 67.2 °C/W storage Temperature -65 to +150°C Operating Temperature -40 to +85°C
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com Mixers - HiGH iP3 - sMT 10 - 5 eLeCTrOsTATiC seNsiTiVe DeViCe OBserVe HANDLiNG PreCAUTiONs Outline Drawing NOTes: 1. LeADFrAMe MATeriAL: COPPer ALLOY 2. DiMeNsiONs Are iN iNCHes [MiLLiMeTers] 3. LeAD sPACiNG TOLerANCe is NON-CUMULAT iVe. 4. PAD BUrr LeNGTH sHALL Be 0.15mm MAxiMUM. PAD BUrr HeiGHT sHALL Be 0.05mm MA xiMUM. 5. PACKAGe WArP sHALL NOT exCeeD 0.05mm. 6. ALL GrOUND LeADs AND GrOUND PADDLe MUsT Be sOLDereD TO PCB rF GrOUND. 7. reFer TO HiTTiTe APPLiCATiON NOTe FOr sUGGesTeD LAND PATTerN. HMC665LP4 / 665LP4E v00.0508 GaAs MMIC MIXER w/ INTEGRATED IF & LO AMPLIFIER, 0.7 - 1.2 GHz Typical Performance Cascade Analysis HMC665LP4E Downconverter Mode (RF Input = 700 to 1200 MHz, IF Output = 250 to 450 MHz, LO = Low Side or High Side) Component Level Cumulative MCM Performance Description Gain (dB) NF (dB) OiP3 (dBm) OP1dB (dBm) +5V Current (mA) Gain (dB) NF (dB) OiP3 (dBm) iiP3 (dBm) OP1dB (dBm) iP1dB (dBm) * rF image rejection filter is not included in the released eval boards. Typical Performance Cascade Analysis HMC665LP4E Upconverter Mode (RF Output = 700 to 1200 MHz, IF Input = 250 to 450 MHz, LO = Low Side or High Side) Component Level Cumulative MCM Performance Description Gain (dB) NF (dB) OiP3 (dBm) OP1dB (dBm) +5V Current (mA) Gain (dB) NF (dB) OiP3 (dBm) iiP3 (dBm) OP1dB (dBm) iP1dB (dBm) * iF image rejection filter is not included in the released eval boards.
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com Mixers - HiGH iP3 - sMT 10 - 6 Part Number Package Body Material Lead Finish MsL rating Package Marking [3] HMC665LP4 Low stress injection Molded Plastic sn/Pb solder MsL1 [1] H665 xxxx HMC665LP4e roHs-compliant Low s tress injection Molded Plastic 100% matte sn MsL1 [2] H665 xxxx [1] Max peak reflow temperature of 235 °C [2] Max peak reflow temperature of 260 °C [3] 4-Digit lot number xxxx
Package Information
Pin Number Function Description interface s chematic 15, 19, 20, 22 - 24 N/C No connection. These pins may be connected to rF ground. Performance will not be affected. 3 rF This pin is DC coupled and matched to 50 Ohms. 7 iFiN This pin is matched to 50 Ohms with a 56nH inductor to ground. see Application Circuit.
9 CAP
AC ground. An external capacitor of 0.01 µF to ground is required for low frequency bypassing. s ee application circuit for further details.
10 MixiF
This pin is DC coupled. For applications not requiring operation to DC, this port should be DC blocked externally using a series capacitor whose value has been chosen to pass the necessary i F frequency range. For operation to DC, this pin must not source/sink more than 18 mA of current or part non-function and possible part failure will result. 12 iFOUT This pin is AC coupled and matched to 50 Ohms.
13 VddiF
Power supply for i F amplifier. Choke inductor and bypass capacitor are required. see application circuit. 16 MixLO This pin is DC coupled and matched to 50 Ohms. An off chip DC blocking capacitor is required.
17 GND Backside of package has exposed metal ground
paddle that must also be connected to ground.
18 VccLO
Power supply and r F Output of the LO amplifier. Three external bypass capacitors are recommended for optimum performance, as illustrated in the application circuit. HMC665LP4 / 665LP4E v00.0508 GaAs MMIC MIXER w/ INTEGRATED IF & LO AMPLIFIER, 0.7 - 1.2 GHz
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com Mixers - HiGH iP3 - sMT 10 - 7 Pin Descriptions (Continued) Pin Number Function Description interface s chematic 21 LO This pin is DC coupled and matched to 50 Ohms. An off chip DC blocking capacitor is required. see application circuit. Evaluation PCB - Upconverter Mode The circuit board used in the application should use rF circuit design techniques. signal lines should have 50 Ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hit- tite upon request. item Description J1 - J3 PCB Mount sMA rF Connector J4 2mm DC Header C1, C2, C3 100 pF Chip Capacitor, 0402 Pkg. C4, C6 1000 pF Chip Capacitor, 0603 Pkg. C5, C7 2.2 µF Capacitor, Tantalum C8 0.01 µF Chip Capacitor, 0402 Pkg. L1, L2 56 nH Chip inductor, 0402 Pkg. L3 36 nH Chip inductor, 0603 Pkg. r1, r3, r4 0 Ohm resistor, 0402 Pkg. r5 24 Ohm resistor, 1210 Pkg. U1 HMC665LP4(e) - Mixer PCB [2] 119242 evaluation Board [1] reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Arlon 25F r List of Materials for Evaluation PCB 122009 [1] HMC665LP4 / 665LP4E v00.0508 GaAs MMIC MIXER w/ INTEGRATED IF & LO AMPLIFIER, 0.7 - 1.2 GHz
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com Mixers - HiGH iP3 - sMT 10 - 8 HMC665LP4 / 665LP4E v00.0508 GaAs MMIC MIXER w/ INTEGRATED IF & LO AMPLIFIER, 0.7 - 1.2 GHz Evaluation PCB - Downconverter Mode The circuit board used in the application should use rF circuit design techniques. signal lines should have 50 Ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hit- tite upon request. item Description J1 - J3 PCB Mount sMA rF Connector J4 2mm DC Header C1, C2, C3 100 pF Chip Capacitor, 0402 Pkg. C4, C6 1000 pF Chip Capacitor, 0603 Pkg. C5, C7 2.2 µF Capacitor, Tantalum C8 0.01 µF Chip Capacitor, 0402 Pkg. L1, L2 56 nH Chip inductor, 0402 Pkg. L3 36 nH Chip inductor, 0603 Pkg. r2, r3, r4 0 Ohm resistor, 0402 Pkg. r5 24 Ohm resistor, 1210 Pkg. U1 HMC665LP4(e) - Mixer PCB [2] 119242 evaluation Board [1] reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Arlon 25F r List of Materials for Evaluation PCB 122010 [1]
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com Mixers - HiGH iP3 - sMT 10 - 9 HMC665LP4 / 665LP4E v00.0508 GaAs MMIC MIXER w/ INTEGRATED IF & LO AMPLIFIER, 0.7 - 1.2 GHz Application Circuit - Upconverter Mode
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com Mixers - HiGH iP3 - sMT 10 - 10 HMC665LP4 / 665LP4E v00.0508 GaAs MMIC MIXER w/ INTEGRATED IF & LO AMPLIFIER, 0.7 - 1.2 GHz Application Circuit - Downconverter Mode