6632B

6632B KEYSIGHT | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 6

Technical content

6630B Series Single-Output, 80-100 W GPIB Power Supplies Data Sheet

2 | Keysight | 6630B Series Single-Output, 80-100 W GPIB Power Supplies - Data Sheet Speed and accuracy for test optimization – Fast, low-noise outputs – Programmable active down-programmer sinks the full rated current – Dual-range, precision low current measurement – Optional isolation and polarity reversal relays – Built-in measurements and advanced programmable features – Protection features to ensure DUT safety The Keysight Technologies, Inc. series of linear-regulated 80-100 W DC power supplies is designed to maximize the throughput of DUTs through the manufacturing test process. Both programming and measurement are optimized for speed. The active downprogrammer can sink up to the full rated current of the power supply, which quickly brings the power supply output to zero volts. The 6630B series offers many advanced programmable features including stored states and status reporting. Programming is done using industry standard SCPI commands via the GPIB or RS-232. Test system integration is further simplified by using the VXIplug&play drivers. The optional relays simplify system design and troubleshooting. The optional front panel binding posts make the 6630B series convenient on the R&D lab bench. The built-in microamp measurement system helps the engineer to easily and accurately monitor the output voltage and current without a complicated test setup.

3 | Keysight | 6630B Series Single-Output, 80-100 W GPIB Power Supplies - Data Sheet Specifications Supplemental Characteristics (Non-warranted characteristics determined by design and useful in applying the product) 6631B 6632B 6634A 6635A Average programming resolution Voltage Current 2 mV 2.5 mA 5 mV 1.25 mA 12.5 mV 0.5 mA 25 mV 0.25 mA Sink current 10 A 5 A 2 A 1 A Sink current tracking SCPI mode Compatibility mode 0.4% + 4 mA –500 mA 0.4% + 2 mA –250 mA 0.4% +1 mA –100 mA 0.4% + 5 mA –50 mA Minimum current in constant current mode* 40 mA 20 mA 8 mA 4 mA Specifications (at 0 ° to 55 ° unless otherwise specified) 6631B 6632B 6633B 6634B Number of outputs 1 1 1 1 GPIB Yes Yes Yes Yes Output ratings Voltage Current 0 to 8 V 0 to 10 A 0 to 20 V 0 to 5 A 0 to 50 V 0 to 2 A 0 to 100 V 0 to 1 A Programming accuracy (at 25 °C ± 5 °C) Voltage +Current 0.05% + 5 mV 4 mA 10 mV 2 mA 20 mV 1 mA 50 mV 0.5 mA Ripple and noise from 20 Hz to 20 MHz with outputs ungrounded or with either terminal grounded Voltage normal mode rms peak-to- peak 0.3 mV 3 mV 0.3 mV 3 mV 0.5 mV 3 mV 0.5 mV 3 mV Fast mode rms peak-to- peak 1 mV 10 mV 1 mV 10 mV 1 mV 15 mV 2 mV 25 mV Current rms 3 mA 2 mA 2 mA 2 mA DC measurement accuracy via GPIB or front-panel meters with respect to actual output at 25 °C ± 5 °C Voltage 0.03% + 2 mV 3 mV 6 mV 12 mV Low current range –20 mA to +20 mA 0.1% + 2.5 μA 2.5 μA 2.5 μA 2.5 μA High current range +20 mA to + rated I 0.2% + –20 mA to –rated I 0.2% + 1 mA 1.6 mA 0.5 mA 1.1 mA 0.25 mA 0.85 mA 0.25 mA 0.85 mA Load regulation Voltage Current 2 mV 2 mA 2 mV 1 mA 4 mV 1 mA 5 mV 1 mA Line regulation Voltage Current 0.5 mV 1 mA 0.5 mV 0.5 mA 1 mV 0.25 mA 1 mV 0.25 mA Transient response time Less than 100 μs (50 μs in the fast mode) for the output voltage to recover to its previous level (within 0.1% of the voltage rating of the supply or 20 mV) following any step change in load current of up to 50% of the output current rating of the supply. * When programming in the 6630A Series language compatibility mode

4 | Keysight | 6630B Series Single-Output, 80-100 W GPIB Power Supplies - Data Sheet Keysight Models: 6631B, 6632B 6633B, 6634B Supplemental characteristics for all model numbers DC floating voltage: Output terminals can be floated up to ±

240 VDC maximum from chassis ground

Remote sensing: Up to two volts dropped in each load lead. Add 2 mV to the voltage load regulation specification for each one volt change in the positive output lead due to load current change. Command processing time: Average time required for the output voltage to begin to change following receipt of digi- tal data is 4 ms for the power supplies connected directly to the GPIB. (Display disabled). Output programming response time: The rise and fall time (10/90% and 90/10%) of the output voltage is less than 2 ms (400 μs in fast mode). The output voltage change settles within 1 LSB (0.025% x rated voltage) of final value in less than 6 ms (2 ms in the fast mode). GPIB interface capabilities: IEEE-488.2, SCPI command set, and 6630A Series programming compatibility Software driver: VXIplug&play Measurement time: Average time to make a voltage or current measurement is 50 ms. Input power (full load): 3.5 A, 250 W Regulatory compliance: Complies with EMC directive 89/336/EEC (ISM 1B). x 14.3 in) Weight: Net, 12.7 kg (28 lb) net; 15.0 kg (33 lb) shipping Warranty: One year Terminal Strip Detail Output 2 & 3 Top Side Rear 364.4 mm 14.3" 100 mm 3.93" 425.4 mm 16.75" +S + - -S 88.1 mm 3.5" Screw Size: M35 x 0.6

5 | Keysight | 6630B Series Single-Output, 80-100 W GPIB Power Supplies - Data Sheet

Ordering information

Opt 100 87 to 106 VAC, 47 to 63 Hz Opt 120 104 to 127 VAC, 47 to 63 Hz Opt 220 191 to 233 VAC, 47 to 63 Hz Opt 230 207 to 253 VAC, 47 to 63 Hz Opt 020 Front-panel binding posts (N/A on 6631B) Opt 760 Isolation and reversal relays, only available at time of order (not available on the 6631B) Opt 8ZJ Removes feet for use in a racked system Opt 0L1 Full documentation on CD-ROM, and printed stan- dard documentation package. CD-ROM includes User’s Guide, Programming Guide, Service Manual and Quick Start Guide Opt 0B3 Service manual Accessories p/n 1494-0060 Rack slide kit E3663AC Support rails for Keysight rack cabinets 1CM002A* Rack mount flange kit 88.1mm H (2U), two flange brackets: 1.75 inch hole spacing 1CP001A* Rack mount flange and handle kit 88.1 mm H (2U), two brackets and front handles Application notes

10 Practical Tips You Need to Know About

Your Power Products, 5965-8239E

10 Hints for Using Your Power Supply to

Decrease Test Time, 5968-6359E Understanding Linear Power Supply Operation (AN1554), 5989-2291EN *Support rails required

www.keysight.com/find/mykeysight A personalized view into the information most relevant to you. Three-Year Warranty www.keysight.com/find/ThreeYearWarranty Keysight’s committed to superior product quality and lower total cost of ownership. Keysight is the only test and measurement company with three-year warranty standard on all instruments, worldwide. And, we provide a one-year warranty on many accessories, calibration devices, systems and custom products. Keysight Assurance Plans www.keysight.com/find/AssurancePlans Up to ten years of protection and no budgetary surprises to ensure your instruments are operating to specification, so you can rely on accurate measurements. Keysight Infoline www.keysight.com/find/service Keysight’s insight to best in class information management. Free access to your Keysight equipment company reports and e-library. Keysight Channel Partners www.keysight.com/find/channelpartners Get the best of both worlds: Keysight’s measurement expertise and product breadth, combined with channel partner convenience. From Hewlett-Packard through Agilent to Keysight For more than 75 years, we‘ve been helping you unlock measurement insights. Our unique combination of hardware, software and people can help you reach your next breakthrough. Unlocking measurement insights since 1939.

1939 THE FUTURE

For more information on Keysight Technologies’ products, applications or services, please contact your local Keysight office. The complete list is available at: www.keysight.com/find/contactus Americas Canada (877) 894 4414 Brazil 55 11 3351 7010 Mexico 001 800 254 2440 United States (800) 829 4444 Asia Pacific Australia 1 800 629 485 China 800 810 0189 Hong Kong 800 938 693 India 1 800 11 2626 Japan 0120 (421) 345 Korea 080 769 0800 Malaysia 1 800 888 848 Singapore 1 800 375 8100 Taiwan 0800 047 866 Other AP Countries (65) 6375 8100 Europe & Middle East Austria 0800 001122 Belgium 0800 58580 Finland 0800 523252 France 0805 980333 Germany 0800 6270999 Ireland 1800 832700 Israel 1 809 343051 Italy 800 599100 Luxembourg +32 800 58580 Netherlands 0800 0233200 Russia 8800 5009286 Spain 800 000154 Sweden 0200 882255 Switzerland 0800 805353 Opt. 1 (DE) Opt. 2 (FR) Opt. 3 (IT) United Kingdom 0800 0260637 For other unlisted countries: www.keysight.com/find/contactus (BP-02-10-16) DEKRA Certified ISO9001 Quality Management System www.keysight.com/go/quality Keysight Technologies, Inc. DEKRA Certified ISO 9001:2015 Quality Management System 6 | Keysight | 6630B Series Single-Output, 80-100 W GPIB Power Supplies - Data Sheet This information is subject to change without notice. © Keysight Technologies, 2012 - 2016 Published in USA, May 9, 2016 5990-9303EN www.keysight.com www.keysight.com/find/6630 www.keysight.com/find/6630