6600020 CLARKE | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 4
Technical content
ASSEMBLY & USER INSTRUCTIONS LS0412 WORK TABLE SUPPORTS MODEL NO: CWTS1 PART NO: 6600020
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com INTRODUCTION Thank you for purchasing the CLARKE Work Table Supports. Before attempting to use this product, please read this manual thoroughly and follow the instructions carefully. GENERAL SAFETY RULES IMPORTANT: Failure to follow these precautions could result in personal injury, and/or damage to property. 1. ALWAYS seek help when moving large items. 2. ALWA YS keep work area clean. Cluttered areas invite accidents. 3. ALWA YS keep children away from work areas. 4. ALWA YS keep your proper footing and balance at all times - don’t overreach. For best footing, wear rubber soled footwear. keep floor clear of oil, scrap wood, etc. 5. ALWAYS check tools are in perfect working order before using. 6. ALWAYS check the stability of thefinished bench before use. 7. ALWAYS selectworktop and shelf materials of sufficient strength and size to support the intended load. SPECIFICATIONS Maximum Capacity :200 kg (depending on table materials used)
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com ASSEMBLY We recommend a worktop and shelf thickness of at least 18 mm. 1. Ensure floor is firm and level before starting. 2. Place the worktop (not supplied) on top of the two work table supports as shown. NOTE: Seek assistance if required. 3. Secure the top to the work table supports using suitable nuts, bolts and washers (not supplied). 4. Measure and fit a shelf in the same way and secure the work table supports to the floor if required using suitable fixings (not supplied). MAXIMUM LOAD Whilst the work table supports have a maximum capacity of 200 kg, the maximum capacity of the finished workbench will depend on the materials used and the distance between the supports. this may be considerably less than 200 kg and is the responsibility of the user. GUARANTEE This product is guaranteed against faulty manufacture for a period of 12 months from the date of purchase. Please keep your receipt which will be required as proof of purchase. This guarantee is invalid if the product is found to have been abused or tampered with in any way, or not used for the purpose for which it was intended. Faulty goods should be returned to their place of purchase, no product can be returned to us without prior permission. This guarantee does not effect your statutory rights.