62GB

62GB AMPHENOLPCD | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 66

Technical content

Datasheet sections

Miniature Bayonet Lock Connectors Designed to meet MIL-C-26482 Amphenol

Current: (a) Maximum current per individual contact (in isolation)* at ambient temperature of 85°C Contact size 12: 23 A (b) Maximum current per contact through all contacts simultaneously at an ambient temperature of 85°C Contact size 12: 20 A Current: (a) Maximum current per individual contact (in isolation)* at ambient temperature of 85°C Contact size 8: 45 A (b) Maximum current per contact through all contacts simultaneously at an ambient temperature of 85°C Contact size 8: 40 A Sea level 8500m (27,900ft) 21,340m (70,OOOft) 1013 mbar /cross 320 mbar 44 mbar Voltage rating I II III I II III I II III Working voltages ** 700 1200 1500 550 650 800 330 380 450 (nominal) d.c. or a.c. peak Voltage proof 2100 3000 3000 1100 1300 1300 660 760 750 d.c. or a.c. peak * i.e. when only one contact per connector is electrically loaded. /cross 1 mbar=10 2 N/m 2=100 Pa ** Establishment of electrical safety factors is the responsibility of the user

Amphenol ® 62GB solder connectors This miniature bayonet lock connector series offers designers important features not found in any other range of connectors. 62GB Series connectors – compliant to the United States Military Specification MIL-C-26482E on certificate No. 1713. They are the first and only British connectors to have achieved this. A doubly strong position which Amphenol are well geared to handle. The manufacturing facilities of the Whitstable plant have been cited as exemplary in Europe. Certainly the layout is extensive and extremely efficient. 62GB Series connectors have been well established with Government authorities on an international scale and users can be found in Sweden, Denmark, Norway, Finland, Germany, Spain, Holland, India, Canada and Italy. Derating Connectors must be derated under the following operating conditions: 1. At elevated ambient temperatures, the current ratings are reduced so that total maximum hot spot temperature of 125°C is not exceeded. 2. At high altitudes, revised voltage ratings become effective as shown on page 7. 3. When connectors to different specifications are intermated, the combination must not be operated under conditions more severe than the less stringent clause of either specification. Basic Construction 62GB Series can be supplied in brass or stainless steel. The normal shell finish used, which has a high resistance to corrosion, is zinc cobalt olive drab. Other finishes may be supplied to special order, such as cadmium plate which is available by adding deviation (714) to the end of part number. For other finishes available, please see part number breakdown Inserts are of polychloroprene rubber compounded to an Amphenol specification. Operating temperature range is -55°C to 125°C, and the connectors have gold-plated contacts designed for soldered connections. Configurations for size 20 contacts range between 2 contacts in the size 8 12.7mm (0.5in diameter) shell up to a maximum of 61 contacts in the size 2436.1 mm (1.5in diameter) shell. Intermediate sizes, and contact data for heavier current ratings are shown in the insert availability chart on page 6 and 7. Hermetic connectors with glass sealed dielectric are manufactured with mild steel shells and nickel iron contacts plated tin over copper. * Other finishes are available on request. Protection Against Mis-Mating or Cross-Plugging Positive shell-to-shell keying is provided with keys and keyways in a choice of either the normal (N) or any of the four preferred alternate positions: B, C, E and F. This prevents mismating between shells of different orientations and overcomes the difficulties associated with rotated inserts and a standard key-keyway orientation. In the latter system, damage to the inserts or contacts can result if excessive force is used to engage non-mating pairs. Rotated inserts are available in positions w, x, y and z. These are to be requested via the part number configuration. See part number breakdown.

Required for Qualification Approval Tests Visual Examination Dimensions, outline mass(including contacts) Compatibility Gauging procedure Polarization Engaging and separating force, connector Contact Holding Force Sealing (air pressure) Sealing Hermetic Contact Resistance Housing (Shell) Continuity Insulation Resistance Voltage Proof Soldering Bumping Sine Vibration Shock Acceleration (Steady State) Rapid Change of Temperature Climatic Sequence Flammability Damp Heat (Steady State) Brief Description Engagement max: 0,90 Nm (8.0 lbf.in.) to 4,97 Nm (44 lbf.in.) according to shell size. Separation min: 0,22 Nm (2.0 lbf.in.) to 1,58 Nm (14.0 lbf.in.) according to shell size. 0,21 N (0.047 lbf) min.size 20 0,56 N (0.126 lbf)min. size 16 Max leakage 28,53 uNm/s (1 cm3/h), 1 Hermetic receptacles have a max leak of 0.1 micron cubic foot per hour (1 x 10-6Cm3/s) 5 milliohms max. 200 milliohms max. 5 milliohms max. grounding spring styles. Plating dependant. 5,000 Megaohms at 500 - 50 V d.c. See page 7. Duration 1 minute As BS 9520: 1983, Clause 1.2.6.7, Method 2. Bit temperature of +350 oC As BS 9520: 1983, Clause 1.2.6.2. 4,000 -10 bumps / 390m / s2 (40 gn). 5000 Hz, 0.75 mm / 10 gn. As BS 9520: 1983, Clause 1.2.6.4. 981 m/s2 (100 g n). As BS 9520: 1983, Clause 1.2.6.5. 490 m/s2 (50 gn). As BS 9520: 1983, Clause 1.2.6.8. -55 to +125 oC one hour at each temperature = 1 cycle. 5 cycles to be completed As BS 9520: 1983, Clause 1.2.6.12. Severity 55/125/56. As BS 9520: 1983, Clause 1.2.6.9. Direct flame applied, duration 1 minute. As BS 9520: 1983, Clause 1.2.6.15. Severity 56 days.

Required for Qualification Approval Tests Brief Description Immersion (at low air pressure) Mechanical Endurance High Temperature Endurance Mould Growth Salt Mist (plating dependant) Dust Robustness of Terminations Contact Retention (in insert) Insert Retention (in shell) Test Prod Damage Impact Grounding Spring Holding Force Plugs with grounding springs only. Fluid Resistance Compass Safe Distance 3 cycles at 30 mins each cycle, total immersion in water at pressure 44 m bar. 500 operations minimum Long term: 1,000 hrs. at 850 C ambient carrying the specified current. Short term: 250 hrs at 1250 C, no current. As BS 9520: 1983, Clause 1.2.6.15. 28 days duration. As BS 9520: 1983, Clause 1.2.6.17. Severity 1. Four spray periods of 2 hours with a humidity storage period of seven days after each As BS 9520: 1983, Clause 1.2.6.18 Exposure 30 minutes. 44,5 N (101bf) size 16 22,2 N (5 lbf) size 20 67,0 N (15 lbf) min. size 20 112,0 N (25 lbf) min. size 16 and above 517 KN1m2 (751bf/in 2 min. Moment: 0,056 Nm (0.5 lbf in) size 20 0,225 Nm (2 lbf in) size 16 Five impacts, drop height 1 m (3ft.3 in.). 1,17 N (0.263 lbf) to 2,74 N (0.616 lbf) according to size. Immersion in 4 solvents and 9 fluids including aircraft fuels, lubricating oils and hydraulic fluids. As BS 9520: 1983, Clause 1.2.5.12. 127 mm (5.0 in) min.

See Pages 16 & 23

• This insert arrangement is not included in B.S. spec., but is available and. listed in MIL-C-26482. /cross Due to the arrangement of contacts in the 14-12 insert arrangement it is classified, for current derating, in the shell size range 18-24. Lettering of inserts shown above corresponds to view of front (mating surface of pin inserts or rear face (cable accessory end) of socket inserts. KEY • No 16 size contacts O No 20 size contacts CURRENT RATING Maximum current per individual contact (in isolation) at a maximum ambient temperature of 85° C: Size 20 contact 7.5A Size 16 contact 13A The performance of 62GB Series connectors at all times exceeds the maximum continuous bunched rating of the appropriate size wire, or cable of equivalent temperature rating. This bunched rating is therefore the determining factor. In the case of mixed loadings, the greatest individual load shall be the bunched loading. In any combination of ambient temperature plus temperature rise due to current flow through the contacts, the maximum connector internal hot spot temperature of 125° C must not be exceeded. That is, when only one contact per connector is loaded.

ALTITUDE -THOUSANDS OF FEET (METRES) Relationship between flashover voltage and altitude for each voltage rating VOLTAGE RATINGS Two categories of voltage rating are specified in BS9522 F0017, F0038 and N0001. Rating 1 (700V d.c. working at sea-level) Applicable to the high contact density inserts shown in the upper section of the insert availability diagram above. Rating 2 (1200V d.c. working at sea-level) Applicable to the inserts shown in the lower section of the insert availability diagram. Altitude derating. Information on voltage derating for operation at altitudes above sea-level can be obtained from the flashover voltage altitude curves on the left. 22 -55 D.C. WORKING VOLTAGE A.C. WORKING VOLTAGE R.M.S. PROOF VOLTAGE D.C. OR A.C. PEAK Rating 1 Sea level 300 mb at 20° C 8,500m (27,800 ft) 44 mb at 20° C 20,000m (66,000 ft) Rating 2 Sea level 300 mb at 20° C 8,500m (27,800 ft) 44 mb at 20"C 20,000m (66,000 ft) 700 550 330 120 650 380 500 390 230 850 460 270 2100 1100 660 3000 1300 760

24 ALTITUDE

To obtain the specific connector required write down the connector number from the typical example below. Only inserts shown in the availability chart on p. 10&11 can be specified. All connectors are delivered with protective dust covers 62GB SHELL STYLE 1 4 E Environmental code A - Plain shell, exposed solder buckets. No grommet E - Insert seal and grommet seal with grommet nut (excluding 12E which has plain shell and no grommet or nut) F - As (E) but grommet nut has integral strain relief clamp H - Hermetic seal no cable accessories J - As (E) but with resilient gland seal and nut for unscreened jacketed cable. No grommet supplied. See pp. 26-27 for accessory to accept screened jacketed cable. P - Potting construction complete with potting mould T - Exposed solder buckets. Threaded shell for cable accessories Shell style 0 - Receptacle wall mounting 1 - Receptacle cable mounting 2 - Receptacle box mounting 3 - Receptacle, solder flange mounting 4 - Receptacle, internally threaded with cable accessories as illustrated, for single hole mounting 6 - Plug cable mounting 7- Receptacle, plain shell, single hole mounting Specification key 1 - Styles originally specified in MIL-C-26482 5 - Styles exclusive to BS9522 F0017 Series designation 62ZN – Zinc Nickel finish

62 GB - Aluminium shell

62 GB SS -Stainless steel shell*

62 GB CU - Brass shell*

*consult factory for availability 62GB-XXH-Hermetic mild steel shell. HOW TO ORDER FROM MS CONNECTOR NUMBERS Connector numbers in the AMPHENOL and MS numbering systems. Only alternative insert orientations are specified in MIL-C-26482 which does not include alternative key/keyway orientations. MS31 - 14 E 18 -11 P X 62GB - 14 E 18 -11 P X

18 11 P B (044) Shell size (in sixteenths of an inch) 8, 10, 12, 14, 16 18,20,22,24 Number of contacts * consult factory for availability Contact Style P - Pins S - Sockets For hermetic connectors. P3 denotes pin contacts with solder bucket terminations. (Standard range). P2 denotes pin contacts with flattened and pierced terminations. (Special order). Orientation (Omit if normal orientation) Keys/Keyways: A', B, C, D', E. F, (see p. 31) Inserts: W,X,Y,Z.(see p56/57) *Inactive for new designs Deviations (044) Rough grip heavy duty coupling ring. (046) Box mounting plug. (214)Fitted with extension back shell and strain relief clamp without grommet on F types only (218) Lever coupling ring (219)Contacts for flexible punted wrung (57A and 12E only) (639) Bright cadmium plated shells (345) Contacts for flexible punted wiring 12H,13H 17H only (276) Hermetics with gold plated contacts. (608) Black anodise. (416) Electroless nickel (714) Cadmium plate olive drab 62GB - 14E C2098 18-11 18 11 P M B B O Style Insert Arrangement, see above M - Pin contacts F - Socket contacts Alternative Key/Key way Orientation Variant. 0 – Standard connector

Page No. 62GB -10A 12 62GB -10E 13 62GB -10F 13 62GB -10J 14 62GB -10P 14 62GB -12E 15

Page No. 62GB -12E(219) 15 62GB -12H Hermetic Seal Box Mounting Receptacles Table of Styles

A max B ± 0.005 (± 0.13) c max sq. D TP Sq. E dia. ± 0.010 (± 0.254) F ±0 005 (± 0.13) G dia max. Y dia. max. X Thread Shell Size A max. B ± 0.005 ( ± 0.13) C Max. sq. D TP sq. E ± 0.010 ( ± 0.254) F ± 0.005 ( ± 0.13) G dia max. Y dia. max. M Box Mounting Receptacles 50T 62GB -50T 4-hole flange mounting with threaded shell to accept standard cable accessories. 10A 62GB -10A 4-Hole flange mounting with general duty back shell. No grommet supplied.

Size max ± 0.005 max TP ± 0.010 ± 0.005 dia dia. 10F 62GB -10F MIL-C-26482 MS31 10F Shell A B C D E F G H Y 4-hole flange mounting with grommet and grommet nut 4-hole flange mounting with grommet and grommet nut fitted with integral strain relief clamp

A max B ± 0.005 ( ± 0.13) c max.sq D TP sq E ± 0.010 ( ± 0.254) F ± 0.005 (± 0.13) G dia. max. Y dia max Z Cable Entry min max closed free 10P 62GB -10P 4-hole flange mounting for potting Shell Size A max B ± 0.005 (± 0.13) c max.sq. D TP sq E ± 0.010 (± 0.254) F ± 0.005 (± 0.13) G dia. max Y dia. max Z dia. min 10J 4-hole flange mounting with clamp for unscreened jacketed cable. No grommet supplied 62GB -10J

A max ± 0.005 (± 0.13) C max sq. D TP sq. E ± 0 010 (± 0.254) F ± 0.005 ( ± 0.13) G dia. max. L V dia. max. Shell Size A max B ± 0.005 (±0.13) C max sq. D TP sq. E dia 0.010 F ± 0.005 (± 0.13) G dia. Max J ± 0.020 (± 0.51) K L Y dia max. Z min max. max min 62GB -12E (219) 12E (219) 4-hole flange mounting with plain shell with film wire terminations

A max B ± 0.005 (± 0.13) C max sq. D E 0.008 (± 0.203) (±.051) .002 F ± 0.005 (± 0.13) R ±0.005 (±0.13) S Y 4-hole square mounting with exposed solder buckets or flattened and pierced pins.

Page No. 62GB -57A (219) 20 62GB -14E 21 62GB -14F 21 62GB -57T 22 62GB -17P 22 62GB -17H Hermetic Seal 23

Page No.

Page No.

Single hole mounting with plain shell for direct wiring to exposed solder buckets. Has panel 'O' ring seal. Shell Size A max B ± 0.005 (± 0.13) C sq, F ± 0.005 (±0.13) K min max L M -0.005 (-0.13) N R ±.0.005 ± 0.005 (±0.13) (±0.13) s min Y X Thread 57A(219) 62GB -57A (219) Single hole mounting with plain shell and film wire terminations Shell Size A m B ±0.005 (± 0.13) C sq. max. max D min F ±0.005 (±0.13) H max min K min max L M N R S min Y X Thread

Single hole mounting with grommet and grommet nut. Has panel 'O' ring seal Shell Size A max B ±0.005 (±0.13) C max sq. F ±0.005 (±0.13) G Dia Max K min max L M N R S Y X Thread 14F 62GB -1 4F MIL-C-26482 MS3114F Single hole mounting with grommet and grommet nut fitted with integral strain relief clamp. Has panel 'O' ring seal Shell Size A max B ±0.005 (±0.13) C max sq. F ±0.005 (±0.13) G dia. max. H 0.005 (± 0.13) K min max L M N R S Y X Thread

Single hole mounting with threaded shell to accept accessories Shell Size A max B ± 0.005 (± 0.13) c max. sq. F ± 0.005 (±0.13) G dia, max. K min max L M -0.005 (- 0.13) N Y X Thread 17P 62GB -17P MIL -C -26482 MS3114P Single hole mounting for potting. Supplied complete with potting mould locating ring and panel 'O' ring seal Shell Size A max. B ±0.005 (±0.13) C max. sq. F ± 0.005 (±0.13) G K min max. L M -0.005 (-0.13) N ±0.005 (±0.13) R ±0.005 (±0.13) Y Z X Thread

Single hole mounting with pin contacts in one piece glass-to-metal seal. Exposed solder buckets or flattened and pierced pins. Has panel 'O' ring seal Shell Size A max. B ±0.005 (±0.13) C max. sq F ±0.005 (±0.13) min K max L M -0.005 (-0.13) N R ±0.005 ±0.005 (±0.13) (±0.13) S Y X Thread 13H 62GB -1 3H MIL-C-26482 MS3113H Solder mounting with plain shell and exposed solder buckets or flattened and pierced pins Shell Size A max B ±0.005 (± 0.13) c max F ±0.005 ( ± 0.13) G max J max R ±0.005 ( ± 0.13) S min Y dia. max

(RSRE SD/C 235025/X) Single hole mounting plain shell with PC pin terminated contacts. Reduced diameter flange with panel 'O' seal Size 10 only A max B +0.001 -0.002 (+0.03) (-0.03) D dia. max F +0.002 -0.003 (+0.05) (-0.08) K min max M -0.005 (-0.13) N ±0.003 (±0.08) R +0.005 (+0.13) S Y dia. max. X Thread L dia 5036 62GB -5036 -10 (RSRE SD/C235025/X) Single hole mounting with circular flange and P.C. terminations Size 10 only Shell Size A max B +0.001 -0.002 (+0.03) (-0.05) D dia. max F +0.002 -0.003 (+0.05) (-0.08) Y dia. max. K min max M -0.005 (-0.13) N ±0.003 (±0.08) R +0.005 (+0.13) S X Thread L dia

(RSRE SD/C 235025/X) Single hole mounting plain shell for direct wiring to exposed solder buckets. Reduced diameter flange with panel 'O' ring seal Solder bucket: Size 10 only Shell Size A max B +0.002 -0.001 (+0.05) (-0.03) D dia. max F + 0.003 - 0.002 (+ 0.08) (- 0.05) K min max M - 0.010 (- 0.25) N ± 0.005 (± 0.13) R + 0.005 (+ 0.13) S Y dia. max. X Thread 5024 62GB -5024 (RSRE SD/C 35077/X) Single hole mounting plain shell for direct wiring to exposed solder buckets. Reduced diameter flange with panel 'O' ring seal Solder buckets: Size 8, 12 and 14 only Shell Size A max B ± 0.005 ( ± 0.13) D dia. max F ± 0.005 ( ± 0.13) K min max M - 0.005 (- 0.13) N R ± 0.005 ±0.005 (± 0.13) (± 0.13) S min Y dia. max X Thread

Single hole fixing with circular flange and back end thread - solder termination Size 10 only Shell Size A max B (± 0.05) (± 0.03) C max. sq. F + 0.003 - 0.002 (+ 0.08) (- 0.05) K min max L M - 0.005 (- 0.13) N ± 0.005 (± 0.13) R ± 0.005 (± 0.13) S ± 0.005 (± 0.13) X Thread 5030 62G B -5030 Bulkhead mounting receptacle with solder terminations Shell Size A max B ± 0.005 (± 0.13) C ± 0.010 (± 0.25) F ± 0.005 (± 0.13) L N Thread

Single hole mounting with plain shell and film wire terminations Shell Size A max B ± 0.005 (± 0.13) C sq. D max min F ± 0.005 (± 0.13) H max min J ± 0.020 (± 0.51) K min max L M N R S Y X Thread 5067 62GB -5067 Single hole mounting with plain shell and film wire terminations Shell Size A max B ± 0.005 (± 0.13) C max sq D max min F ± 0.005 (± 0.13) H max min J ± 0.012 (± 0.30) K min max L M N R S Y X Thread

Page No.

Basic cable mounting receptacle with threaded shell to accept standard cable accessories. Shell Size A max B ± 0.005 (± 0.13) C max sq F ± 0.005 (± 0.13) Y dia max X Thread 11A 62GB -11A Cable mounting receptacle with general duty back shell. No grommet supplied. Shell Size A max B ± 0 005 (± 0.13) C max sq F ± 0.005 (± 0.13) G dia max Y Dia max M Thread

Cable mounting receptacle with grommet and grommet nut Shell Size A max B ± 0.005 (± 0.13) C max sq F ± 0.005 (± 0.13) G dia max Y dia max 62GB -11F MIL-C-26482 MS3111F Cable mounting receptacle with grommet and grommet nut fitted with integral strain relief clamp Shell Size A max B ± 0.005 (± 0.13) C max sq F ± 0.005 (± 013) G dia max H ± 0.005 (± 0.13) Y dia max 11F

With cable clamp for unscreened jacketed cable. No grommet supplied Shell Size A max B ± 0.005 (± 0.13) C max sq F ± 0.005 (± 0.13) G dia max Y dia max min closed Z max free 11P 62GB -11P MIL-C-26482 MS3111P For potted se al supplied complete with detachable potting mould and location ring Shell Size A max ± 0.005 (± 0.13) C max sq F ± 0.005 (± 0.13) G dia max Y dia max Z min

(046) 62GB-16E 62GB-16F 62GB-16P Page No.

Page No.

Basic plug with threaded shell to accept standard cable accessories Shell Size A Max C max X Thread 08 0.976 0.750 7/16 - 28 UNEF 24.79 19.05 10 0.976 0.859 9/16 - 24 NEF 24.79 21.82 12 0.976 1.031 11/16 -24NEF 24.79 26.19 14 0.976 1.156 13/16 - 20 UNEF 24.79 29.36 16 0.976 1.281 15/16 - 20 UNEF 24.79 32.54 20 &976 1.531 1.3/16 - 18 NEF 24.79 38.89 56TG 62GB -56TG Basic plug with threaded shell to accept standard cable accessories. Has shell grounding spring fingers Shell Size A max C max X Thread 08 0.976 0.750 7/16 - 28 UNEF 24.79 19.05 10 0.976 0.859 9/16 - 24 NEF 24.79 21.82 12 0.976 1.031 11/16 – 24 NEF 24,79 26.19 14 0.976 1.156 13/16 – 20 UNEF 24.79 29.36 16 0.976 1.281 15/16 - 20 UNEF 24.79 32.54 24 0.976 1.777 11/16 - 18 NEF 24.79 45.14

Plug with general duty back shell. No grommet provided. Shell Size A max C max G max M Thread 56T 62GB -56T(046) Box-mounting plug. Available for shell size 16: other sizes to special order. Cable accessories cannot be fitted. Shell Size A max J max K L

Plug with grommet and grommet nut Shell Size A max C max G max 08 1.281 0.750 0.561 32.54 1.05 14.25 10 1.281 0.859 0.686 32.54 21.82 17.431 12 1.281 1.031 0.811 32.54 26.19 20.60 14 1.281 1.156 0.936 I 32.54 29.36 23.78 16 1.281 1.281 1.061 32.54 32.54 26.95 18 1.281 1.391 1.186 32.54 35.33 30.13 20 1.281 1.531 1 .311 32.54 38.89 33.30 22 1.281 1.656 1.436 32.54 42.06 36.75 24 1.281 1.777 1.561 32.54 45.14 39.65 16F 62GB -16F MIL - C26482 MS3116F Plug with grommet and grommet nut fitted with integral strain relief clamp. Shell Size A max C dia max G dia max H ± 0.005 (± 0.13) 08 1.752 0.750 0.828 0.156 44.50 19.05 21.03 3.96 10 1.752 0.859 0.891 0.188 44.50 21.82 22.63 4.78 12 1.752 1.031 1.016 0.312 44.50 26.19 25.81 7.93 14 1.726 1.156 1.141 0.375 43.84 29.36 28.97 9.53 16 1.866 1.281 1.203 0.500 47.40 32.54 30.56 12.70 18 1.866 1.391 1.426 0.625 47.40 35.33 36.22 15.88 20 2.040 1.531 1.426 0.625 51 .81 38.89 36.22 15.88 22 2.040 1.656 1.567 0.750 51.81 42.06 39.80 19.05 24 2.178 1.777 1.735 0.800 55.32 45.14 44.07 20.32 Plugs

For potted seal. Supplied complete with detachable potting mould and location ring. Shell Size A max C max G max Z min 08 1.306 0.750 0.572 0.260 33.17 19.05 14.53 6.60 10 1.415 0.859 0.666 0.463 35.94 21.82 16.92 11.76 12 1.384 1.031 0.822 0.557 35.15 26.19 20.88 14.14 14 1.384 1.156 0.907 0.590 35.15 29.36 23.04 14.99 16 1.384 1.281 1.040 0.713 35.15 32.54 26.41 18.11 18 1.384 1.391 1.165 0.835 35.15 35.33 29.59 22.21 20 1.539 1.531 1.285 1.015 39.09 38.89 32.64 25.78 22 1.539 1.656 1.400 1.015 39.09 42.06 35.56 25.78 24 1.602 1.777 1.540 1265 40.69 45.14 39.12 32.13 16J 62GB - 16J Plug with cable clamp for unscreened jacketed cable. No grommet supplied. Shell Size A max C max G max Z min max Plugs

Low profile, solder termination plug with 90° screened cable outlet. Shell Size A max B max C max D max 10 1.473 0.500 0.980 1.500 37.41 12.70 24.89 38.10 5055 62GB -5055 -10 SD/2 235 193 - X Low profile solder termination plug with size 12 90° screened cable outlet. Shell A B C D Size max max max max 10 1.800 0.655 0.980 1.800 45.72 16.64 24.89 45.72 5056 62GB -5056 -10 Audio plug with solder termination Shell Size A max B max C max 10 2.375 0.979 / 0.969 0.310 60.33 24.87 / 24.61 7.87 Plugs

Flange mounting push/pull plug with threaded shell t o accept standard cable accessories. Shell Size A max B max C L 10 0.912 1.125 0.866 9/16 - 24 NEF 23.17 28.57 22.00 12 0.912 1.218 0.969 9/16 - 24 NEF 23.17 30.93 24.61 14 0.912 1.312 1.062 9/16 - 24 NEF 23.17 33.32 26.97 Plugs

Page No.

Page No.

Caps and chains for single hole mounting receptacles Shell Size A ± 0.25 (± 6.35) B ± 0.005 (± 0.13) C dia max J ± 0.005 (± 0,127) 08 3.0 0.521 0.734 0.578 76.2 13.23 18.64 14.68 10 3.0 0.521 0.859 0.703 76.2 13.23 21.82 17.86 12 3.5 0.521 1.000 0.891 88.9 13.23 25.4 22.63 14 3.5 0.521 1.125 1.016 88.9 13.23 28.57 25.81 16 3.5 0.521 1.250 1.141 88.9 13.23 31.75 29.39 18 3.5 0.521 1.375 1.266 88.9 13.23 34.92 32.16 20 4.0 0.521 1.500 1.391 101.6 13.23 38, 1 35.33 22 4.0 0.521 1.625 1.516 101.6 13.23 41.27 38.51 24 4.0 0.556 1.750 1 .641 101.6 14.12 44.45 41.68 737 62GB -737 Caps and chains for cable mounting receptacles. Shell Size A ± 0.25 (± 6.35) B ± 0.005 ( ± 0.13) C dia max J ± 0.005 (± 0.127) 08 3.0 0.521 0.734 0.458 76.2 13.23 18.64 11.63 10 3.0 0.521 0.859 0.583 76.2 13.23 21.82 14.81 12 3.5 0.521 1.000 0.708 88.9 13.23 25.4 17.98 14 3.5 0.521 1.125 0.896 88.9 13.23 28.57 22.76 16 3.5 0.521 1.250 1.021 88.9 13.23 31.75 25.93 18 3.5 0.521 1.375 1.146 88.9 13.23 34.92 29.11 20 4.0 0.521 1.500 1.271 101.6 13.23 38.1 32.28 22 4.0 0.521 1.625 1.396 101.6 13.23 41.27 35.46 24 4.0 0.556 1.750 1.521 101.6 14.12 44.45 38.63

Caps and chains for flange mounting receptacles. Shell Size A ± 0.25 (± 6.35) B ± 0.005 (± 0.13) C dia max J ± 0.005 (± 0.127) 08 3.0 0.521 0.734 0.125 76.2 13.23 18.64 3.18 10 3.0 0.521 0.859 0.125 76.2 13.23 21.82 3.18 12 3.5 0.521 1.000 0.125 88.9 13.23 25.4 3.18 14 3.5 0.521 1.125 0.125 88.9 13.23 28.57 3.18 16 3.5 0.521 1.250 0.125 88.9 13.23 31. 75 3.18 18 3.5 0.521 1.375 0.125 88.9 13.23 34.92 3.18 20 4.0 0.521 1.500 0.125 101.6 13.23 38.1 3.18 22 4.0 0.521 1.625 0.125 101.6 13.23 41.27 3.18 24 4.0 0.556 1.750 0.152 101.6 14.12 44.45 3.86 742 62GB -742 Caps and chains for plugs. Shell Size A ± 0.25 ( ± 6.35) B ± 0.005 ( ± 0.13) C dia max J ± 0.005 ( ± 0.127) 08 3.0 0.522 0.719 0.125 76.2 13.25 18.26 3.18 10 3.0 0.522 0.844 0.125 76.2 13.25 21.43 3.18 12 3.5 0.522 1.000 0.125 88.9 13.25 25.4 3.18 14 3.5 0.522 1.125 0.125 88.9 13.25 28.57 3.18 16 3.5 0.522 1.250 0.125 88.9 13.25 31.75 3.18 18 3.5 0.522 1.357 0.125 88.9 13.25 34.92 3.18 20 4.0 0.584 1.500 0.125 101.6 14.83 38.1 3.18 22 4.0 0.584 1.625 0.125 101.6 14.83 41.27 3.18 24 4.0 0.617 1.750 0.152 101.6 15.67 44.45 3.86

A ± 0.25 (± 6.35) B ± 0.005 (± 0.13) C dia max J ± 0.003 (± 0.08) 08 3.0 0.522 0.719 0.145 76.2 13.25 18.26 3.68 10 3.0 0.522 0.844 3.685 76.2 13.25 21.43 3.68 12 3.5 0.522 1.000 0.145 88.9 13.25 25.4 3.68 14 3.5 0.522 1.125 0.145 88.9 13.25 28.57 3.68 16 3.5 0.522 1.250 0.145 88.9 13.25 31.75 3.68 18 3.5 88.9 0.522 13.25 1.375 34.93 0.145 3.68 20 4.0 0.584 1.500 0.145 101.6 14.83 38.1 3.68 22 4.0 0.584 1.625 0.145 101.6 14.83 41.27 3.68 24 4.0 0.617 1.750 0.171 101.6 15.67 44.45 4.34 812 62GB -812 Caps and cords for flange mounting receptacles. Shell Size A ± 0.25 (± 6.35) B ± 0.005 (± 0.13) C dia max J ± 0.003 (± 0.08) 08 3.0 0.521 0.734 0.145 76.2 13.23 18.64 3.68 10 3.0 0.521 0.859 0.145 76.2 13.23 21.82 3.68 12 3.5 0 521 1 .000 0.145 88.9 13.23 25.4 3.68 14 3.5 0.521 1.125 0.145 88.9 13.23 28.57 3.68 16 3.5 0.521 1 .250 0.145 88.9 13.23 31.75 3.68 18 3.5 0.521 1.375 0.145 20 4.0 0.521 1.500 0.145 101.6 13.23 38.1 3.68 22 4,0 0.521 1.625 0.145 101.6 13.23 41.27 3.68 24 4.0 0.556 1.750 0.171 101 .6 14.12 44.45 4.34

Caps and cords for single hole mounting receptacles. Shell Size A ± 0.25 (± 6.35) B ± 0.005 (± 0.13) C max J + 0.010 (+ 0.25) 08 3.0 0.521 0.734 0.578 76.2 13.23 18.64 14.68 10 3.0 0.521 0.859 0.703 76.2 13.23 21.82 17.86 12 3.5 0.521 1.000 0.891 88.9 13.23 25.4 22.63 14 3.5 0.521 1.125 1.016 88.9 13.23 28.57 25.81 16 3.5 0.521 1.250 1.141 88.9 13.23 31.75 29.39 18 3.5 0.521 1.375 1.266 88.9 13.23 34.92 32.16 20 4.0 0.521 1.500 1.391 101.0 13.23 38.1 35.33 22 4.0 0.521 1.625 1.516 101.6 13.23 41.27 38.56 24 4.0 0.556 1.750 1.641 101.6 14.12 44.45 41.68 814 62GB -814 Caps and cords for cable mounting receptacles. Shell Size A ± 0.25 ( ± 6.35) B ± 0.005 ( ± 0.13) C max J +0.010 ( + 0.25) 08 3.0 0.521 0.734 0.453 76.2 13.23 18.64 11.50 10 3.0 0.521 0.859 0.578 76.2 13.23 21.82 14.64 12 3.5 0.521 1.000 0.703 88.9 13.23 25.4 17.85 14 3.5 0.521 1.125 0.891 88.9 13.23 28.57 22.63 16 3.5 0.521 1.250 1.016 88.9 13.23 31.75 25.80 18 3.5 0.521 1.375 1.141 88.9 13.23 34.92 28.98 20 4.0 0.521 1.500 1.266 101.6 13.23 38.1 32.15 22 4.0 0.521 1.625 1.391 101.6 13.23 41.27 35.33 24 4.0 0.556 1.750 1.516 101.6 14.12 44.45 38.50

Caps and chains ribbed for single hole mounting receptacles. Shell Size A ± 0.25 (± 6.35) B ± 0.005 ( ± 0.13) C dia max J + 0.010 ( + 0.25) 08 3.0 0.521 0.892 0.578 76.2 13.23 22.66 14.69 10 3.0 0.521 1.017 0.703 76.2 13.23 26.84 17.86 12 3.5 0.521 1.142 0.891 88.9 13.23 29.01 22.64 14 3.5 0.521 1.267 1.016 88.9 13.23 32.19 25.81 16 3.5 0.521 1.454 1.141 88.9 13.23 36.94 28.99 18 3.5 0.521 1.563 1.266 88.9 13.23 39.70 32.16 20 4.0 0.521 1.687 1.391 101.6 13.23 42.85 35.34 22 4.0 0.521 1.797 1.516 101.6 13.23 45.65 38.51 24 4.0 0.556 1.922 1.641 101.6 14.12 48.82 41.69 998 62GB -998 Caps and chains ribbed for plugs. Shell Size A ± 0.25 (± 6.35) g max C dia max J ± 0.005 ( ± 0.13) 08 3.0 0.562 0.892 0.125 76.2 1428 22.66 3.18 10 3.0 0.562 1.017 0.125 76.2 14.28 25.84 3.18 12 3.5 0.562 1.142 0.125 88.9 1428 29.01 3.18 14 3.5 0.562 1.267 0.125 88.9 14.28 32.19 3.18 16 3.5 0.562 1.454 0.125 88.9 14.28 36.94 3.18 18 3.5 0.562 1.563 0.125 88.9 14.28 39.70 3.18 20 4.0 0.624 1.687 0.125 101 .6 15.85 42.85 3.18 22 4.0 0.624 1.797 0.125 101.6 15.85 45.65 3.18 24 4.0 0.624 1.922 0.147 101.6 15.85 48.82 3.74

Caps and cords ribbed for single hole mounting receptacles. Shell Size A ± 0.25 (± 6.35) B ±.0.005 ( ± 0.13) C dia max J + 0.010 ( + 0.25) 08 3.0 0.521 0.892 0.578 76.2 13.23 22.66 14.69 10 8.0 0.521 1.017 0.703 76.2 13.23 26.84 17.86 12 3.5 0.521 1.142 0.891 88.9 13.23 29.01 22.64 14 3.5 0.521 1.267 1.016 88.9 13.23 32.19 25.81 16 3.5 0.521 1.454 1.141 88.9 13.23 36.94 28.99 18 3.5 0.521 1.563 1.266 88.9 13.23 39.70 32.16 20 4.0 0.521 1.687 1.391 101.6 13.23 42.85 35.34 22 4.0 0.521 1.797 1.516 101.6 13.23 45.65 38.51 24 4.0 0.556 1.922 1.641 101.6 14.12 48.82 41.686 1070 62GB -1070 Caps and cords ribbed for flange mounting receptacles. Shell Size A ± 0.25 (± 6.35) B ± 0.005 ( ± 0.13) C Dia max J ± 0.005 (± 0.13) 08 3.0 0.521 0.892 0.117 76.2 13.23 22.66 3.03 10 3.0 0.521 1.017 0.119 76.2 13.23 22.66 3.03 12 3.5 0.521 1.142 0.119 88.9 13.23 29.01 3.03 14 3.5 0.521 1.267 0.119 88.9 13.23 32.19 3.03 16 3.5 0.521 1.454 0.119 88.9 13.23 36.94 3 03 18 3.5 0.521 1.563 0.119 88.9 13.23 39.70 3.03 20 4.0 0.521 1.687 0.119 101.6 13.23 42.85 3.03 22 4.0 0.521 1.797 0.119 101.6 13.23 45.65 3.03 24 4.0 0.556 1.922 0.147 101.6 14.12 48.82 3.74

Flange mounting gasket for box mounting and hermetic receptacles. Shell Size ± 0.010 (± 0.254) E ± 0.010 (± 0.254) F ± 0.008 (± 0.20) G + 0.010 (+ 0.254) H

Page No.

Page No.

584 62GB - 584 - XX - XXS or P Grommet seal and nut. Provides an environmental seal for the exposed solder buckets in the open back class T shells. Suffix XX - XXS or P enables grommet to be matched to the insert arrangement. Shell Size A G max 08 0.545 0.561 13.84 14.25 10 0.545 0.686 13.84 17.43 12 0.545 0.811 13.84 20.60 14 0.545 0.936 13.84 23.78 16 0.545 1.061 13.84 26.95 18 0.545 1.186 13.84 30.13 20 0.545 1.311 13.84 33.30 22 0.545 1.436 13.84 36.75 24 0.501 1.561 12.73 39.65 585 62G B - 585 - XX - XXS or P A2103 Grommet and nut with strain relief clamp. The clamp prevents the flexing of the wires in the immediate vicinity of the risers, so avoiding the risk of leaks. Suffix XX - XXS or P enables grommet to be matched to the insert arrangement. Shell Sine A max G max max 08 0.991 0 828 0.161 25.17 21.03 4.09 10 0.991 0.891 0.193 25.17 22.63 4.90 12 0 991 1.016 0.317 25.17 25.81 8.05 14 0.965 1.141 0.380 24.51 28.98 9.65 16 1.105 1.203 0.505 28.07 30.56 12.83 18 1.105 1.426 0.630 28.07 36.22 16.00 20 1.285 1.426 0.630 32.64 36.22 16.00 22 1.285 1.567 0.755 32.64 39.80 19.18 24 1.373 1.735 0.805 34.88 44.07 20.45

Potting mould and ring, supplied together as a set. Suffix XX specifies shell size. Shell Size A max G max Z min 08 0.644 0.585 0.260 16.36 14.85 6.60 10 0.753 0.679 0.463 19.13 17.24 11.76 12 0.722 0.835 0.557 18.34 21.20 14.14 14 0.722 0.913 0.590 18.34 23.19 14.98 16 0.722 1.038 0.713 18.34 26.36 18.11 18 0.722 1.163 0.835 18.34 29.54 21.20 20 0 877 1.288 1.015 22 30 32.71 25.78 22 0.877 1.413 1.015 22.30 35.89 25.78 24 0.896 1.538 1.263 22.76 39.06 32.08 587 62G B - 587 - XX - XXS or P Clamp for screened jacketed cable. 62 Series only with grommet. Effective sealing is provided over the range of cables covered by DEF 10(Pattern C) and DEF STAN 61-12 port (see table). These are supplied to separate order only for use with style T shells. Suffix XX-XXS or P enables grommet to be matched to the insert arrangement. Shell Size length Including plug A Max length Including receptacle B max G max 08 2.732 2.742 0.676 0.775 69.39 69.64 17.17 19.68 10 2.742 2.752 0.676 0.902 69.64 69.90 17.17 22.91 12 3.152 3162 0.812 1.030 80.06 80.31 20.62 2616 14 3.152 3.162 0.926 1.157 80.06 80.31 23.52 29.39 16 3.272 3 282 1.051 1.284 83.10 83.36 26.67 32.61 18 - - - - - - - - 20 3.272 3.345 1.280 1.539 83.10 84.96 32.51 39.09 22 - - - - - - - - 24 3.696 3.768 1.620 1.783 93.87 95.70 41.15 45.29

711 62G B - 711 - XX - XXS or P Grommet and nut with right angled strain relief clamp. The clamp prevents flexing of the wires in the immediate vicinity of the risers, so avoiding the risk of leaks (these are supplied to separate order only for use with style T shells). Suffix XX - XXS or P enables grommet to be matched to the insert arrangement. Shell Size A max G max H ± 0.005 ± 0.13 Q max 08 1.5/32 0.828 0.161 0.733 21.03 4.09 18.62 10 1.3/16 0.891 0.193 0.795 22.63 4.90 20.19 12 1.7/32 1.016 0.317 0.858 25.81 8.05 21.79 14 1.1/4 1.141 0.380 0.915 28.98 9.65 23.24 16 1.5/16 1.203 0.505 1.010 30.56 12.83 25.65 18 1.3/8 1.426 0.630 1.070 36.22 16.00 27.18 20 1.3/8 1.426 0 630 1.140 36.22 16.00 28.96 22 1.29/64 1.567 0.755 1.170 39.80 19.18 29.72 24 1.15/32 1.735 0.805 1.260 44.07 20.45 32.00 720 62G B - 720 - XX Clamp for unscreened jacketed cable. No grommet is supplied, for use with 50T, 51T and 56T styles. Suffix XX specifies shell size. Shell Size A max G max Z closed Z free 08 1.085 0.561 0 168 0 230 27.56 14.25 4.28 5.84 10 1.060 0.686 0.205 0.312 26.92 17.43 5.21 7.93 12 1.160 0.81 1 0 338 0.442 29.46 20.60 8.59 1 1.23 14 1.360 0.936 0.416 0.539 1 34.54 23.78 10.57 13.69 16 1.585 1.061 0.550 0.616 40.26 26.95 13.97 15.65 18 1.785 1.186 0.600 0.672 45.34 30.13 15.24 17.57 20 1.981 1.311 0.635 0.747 50.32 33 30 16.13 18.98 22 2.181 1.436 0.670 0.846 55.39 36.75 17.02 21.49 24 2.216 1.561 0.740 0.894 56.28 39.65 18.80 22.71

General duty shell to accept conduit, AN 3057 or MS 3057 A cable clamps and heat shrink sleeves. Shell Size A max M Thread 08 0.937 1/2 - 28 UNEF 23.80 10 0.937 5/8 - 24 NEF 23.80 12 0.937 3/4 - 20 UNEF 23.80 14 0.937 7/8 – 20 UNEF 23.80 16 0.937 1 - 20 UNEF 23.80 18 0.937 1.3/16 - 18 NEF 23.80 20 0.937 1.3/16 - 18 NEF 23.80 22 0.937 1.7/16 - 18 NEF 23.80 24 0.937 1.7/16 - 18 NEF 23.80 1225 62GB - 1225 900 clamp for screened jacketed cable. These are supplied to separate order only for use with style T shells. Shell Size A max B max C max D max 08 0.942 0.821 1.160 0.636 23.93 20.85 29.46 16.15 10 0.883 0.821 1.160 0.636 22.43 20.85 29.46 16.15 12 0.704 0.821 1.160 0.636 17,88 20.85 29.46 16.15 14 1.119 0.937 1.160 0.636 28.42 23.80 29.46 16.15

5028 62G B - 5028 - XX - XXS or P 75% Clamp for screened jacketed cable with grommet. Effective sealing is provided over the range of cables covered by DEF 10 (Pattern C) and DEF STAN 61 - 12 part 5 (see table). These are supplied to separate order only and are intended for use with style T shells. Suffix XX-XXS or P enables grommet to be matched to the insert arrangement. Shell Size length including receptacle A Max length including plug B max G max max 18 - - - - - - - - - - 20 3.312 3.250 1.280 1 539 2.062 84.13 82.55 32.51 39 09 52.38 22 - - - - - - - - - -

Alternative position of insert with socket contacts (∅ counter clockwise) Each diagram shows mating face of insert. Alternate position of insert with pin contacts (∅ clockwise) Orientation ∅ (degrees) Insert Arrangement Normal W X Y Z 8-2 0 58 122 - - 8-3 0 60 210 - - 8-33 0 90 - - - 8-4 0 45 - - - 8-98 0 - - - - 10-2 0 - - - - 10-6 0 90 - - - 10-7 0 - - - - 12-3 0 - - 180 - 12-10 0 60 155 270 295 14-5 0 40 92 184 273 14-12 0 43 90 - - 14-15 0 17 110 155 234 14-19 0 30 165 315 - 16-18 0 54 152 180 331 16-23 0 158 270 - - 16-26 0 60 - 275 338 18-11 0 62 119 241 340 18-32 0 85 138 222 265 20-16 0 238 318 333 347 20-41 0 45 126 225 - 22-21 0 16 135 175 349 22-55 0 30 142 226 314 24-61 0 90 180 270 324

Datum is always taken from major key or keyway. In receptacles the major keyway always remains fixed in relation to the mounting flange. For the A',B,C,D',E and F orientations, the three bayonet locations and associated minor keyways are rotated complete, in accordance with the table below. N.B. - The accompanying diagram shows a receptacle shell, with keyways. Corresponding key orientations for a mating plug shell are therefore always clockwise. Shell Size Values for ∝ (degrees) Values for θ (degrees) Values for β (degrees) N A B C D E F N A B C D E F N A B C D E F 8 105 92 - - 118 118 82 35 35 - - 35 30 50 75 75' - - 75 100 75 10 105 95 85 125 115 115 85 35 35 35 35 35 30 50 75 75 75 75 75 100 75 12 105 97 89 121 113 115 85 35 35 35 35 35 30 50 75 75 75 75 75 100 75 14 105 98 91 119 112 75 120 35 35 35 35 35 30 50 75 75 75 75 75 100 75 16 105 99 93 117 111 75 120 35 35 35 35 35 30 50 75 75 75 75 75 100 75 18 105 100 95 115 110 75 120 35 35 35 35 35 30 50 7 5 75 75 75 75 100 75 20 105 100 95 115 110 75 120 35 35 35 35 35 30 50 75 75 75 75 75 100 75 22 105 101 97 113 109 7S 120 35 35 35 35 35 30 50 7 5 75 75 100 75 75 75 24 105 101 97 113 109 75 120 35 35 35 35 35 30 50 75 75 75 75 75 100 75 Shell Size Values for ϕ (degrees) Orientation Values for ω (degrees) Orientation N A B C D E F N A B C D E F 8 50 50 50 50 50 30 45 60 47 - - 73 73 47 10 50 50 50 50 50 30 45 60 50 40 80 70 70 50 12 50 50 50 50 50 30 45 60 52 44 76 68 70 50 14 50 50 50 50 50 30 35 60 53 46 74 67 30 75 16 50 50 50 50 50 30 35 60 54 48 72 66 30 75 18 50 50 50 50 50 30 35 60 55 50 70 65 30 75 20 50 50 50 50 50 30 35 60 55 50 70 65 30 75 22 50 50 50 50 50 30 35 60 56 52 68 64 30 75 24 50 50 50 50 50 30 35 60 56 52 68 64 30 75

for Amphenol straight S.J. clamps 62GB -587 for internally and externally screened and unscreened cables to DEF 10 and DEF STAN 61-12 Part 5. Internally Screened Jacketed Cable ‘Type C’ Cable and Wire Stripping Strip the outer P.V.C. Jacket of the cable back to dim \`A' to expose the internal braid. Trim the braid back to within A Dimension Size mm in 08 34.93 1.375 10 36.51 1.437 12 8 14 41.27 1.625 16 & 20 44.45 1.75 24 49.21 1.937 Strip 5.3mm (0.210 in) to 6.1 mm (0.240 in) of insulation from each wire to expose centre conductor. Tin the ends. If ends fray twist them back to their original lay before tinning. Initial Assembly Slide onto the cable the following items in this order (1) Nut (2) Washer (3) Gasket (4) Braid Clamp and (5) Clamp Body (6) Grommet. Solder Connection to Contacts Insert the individual wires into the appropriate grommet holes. At the same time, slide the grommet back as far as possible until the tinned ends of the centre conductors are far enough out of the grommet to permit soldering to the contacts. Insert the tinned ends of wires into the appropriate contacts in 62 series connector and solder into place. Slide the grommet forward over the wired contacts and press firmly into rear of connector shell and against rear face of insert.

Externally Screened J acketed Cable Types ‘B’ & \Q’ Cable and Wire Stripping Strip the outer braid and internal P.V.C. jacket of the cable back to dim ‘A’ A Dimension Size mm in 08 33.32 1.312 10 34.93 1.375 12 & 14 39.7 1.563 16 & 20 42.85 1.687 24 47.63 1.875 Strip 5.3mm (0.210 in) to 6.1 mm (0.240 in) of insulation from each wire to expose centre conductor. Tin the ends. If ends fray twist them back to their original lay before tinning. Initial Assembly Slide onto the cable the following items in this order (1) Nut (2) Washer (3) Male Braid Clamp Convolute Screen (See B) as far as possible, and slide on items (4) Female Braid Clamp (5) Gasket and (6) Clamp Body (7) Grommet Solder Connection to Contacts Insert the individual wires into the appropriate grommet holes. At the same time, slide the grommet back as far as possible, until the tinned ends of the centre conductors are far enough out of the grommet to permit soldering to the contacts. Insert the tinned ends of wires into the appropriate contacts in 62 series connector and solder into place. Slide the grommet forward over the wired contacts and press firmly into the rear of connector shell and against rear face of insert. Unscreened Jacketed Cables Type \A' All procedures concerning this type of cable to be as for internally screened jacketed cable, but all references to screen (Braid) to be disregarded.

for Amphenol angled S.J. clamps 62GB -5028 for internally and externally screened and unscreened cables to DEF 10 and DEF STAN 61-12 Part 5. Internally Screened Jacketed Cable Type \C’ Cable and Wire Stripping Strip the outer P.V.C. jacket of the cable back to dim \A' to expose the internal braid. Trim the braid back to within A Dimension Size mm in 08 58.15 2.89 10,12,14 66.68 2.625 16 69.85 2.75 20 88.9 3.50 24 95.25 3.75 Strip 5.3mm (0.210 in) to 6.1 mm (0.240 in) of insulation from each wire to expose centre conductor. Tin the ends. If ends fray, twist them back to their original lay before tinning. Initial Assembly Slide onto the cable the following items in this order (1) Nut (2) Washer (3) Gasket (4) Braid Clamp (5) 75o Angled Body (6) Grommet. Solder Connection to Contacts Insert the individual wires into the appropriate grommet holes. At the same time, slide the grommet back as far as possible, until the tinned ends of the centre conductors are far enough out of the grommet to permit soldering to the contacts. Insert the tinned ends of wires into the appropriate contacts in 62 series connector and solder into place. Slide the grommet forward over the wired contacts and press firmly into the rear of the connector shell and against rear face of insert.

Solder Connection to Conta cts Insert the individual wires into the appropriate grommet holes. At the same time, slide the grommet back as far as possible, until the tinned ends of the centre conductors are far enough out of the grommet to permit soldering to the contacts. Insert the tinned ends of wires into the appropriate contacts in 62 series connector and solder into place. Slide the grommet forward over the wired contacts and press firmly into the rear of connector shell and against rear face of insert. A Dimension Size mm in 08 58.15 2.89 10,12,14 66.68 2.625 16 69.85 2.75 20 88.9 3.50 24 95.25 3.75 Externally Screened Jacketed Cables Type \B' & \Q' Cable and Wire Stripping Strip the outer braid and internal P.V.C. jacket of the cable back to dim \A'. Strip 5. 3mm (0.210 in) to 6.1 mm (0.240 in) of insulation from each wire to expose centre conductor Tin the ends. If ends fray, twist them back to their original lay before tinning. Initial Assembly Slide onto the cable the following items in this order:(1) Nut (2) Washer (3) Male Braid Clamp - Convolute Screen (See B) as far as possible and slide on items:(4) Female Braid Clamp (5) Gasket (6) 75o Right Angled Body (7) Grommet. Unscreened Jacketed Cables Type \A' All procedures concerning this type of cable to be as for internally screened jacketed cable, but all references to screen (Braid) to be disregarded.

Strip 5.3mm (0.210 in) to 6.1 mm (.240 in) of insulation from end of wires to expose centre conductor and tin the ends. If ends fray, twist them back to their original lay before tinning. Wire Accommodation Wire Seal and Conductor Contact Size Colour Code Wire Insulation min. dia. max. dia. Conductor max. dia. ins (mm) ins (mm) ins (mm) Red Blue 0.047 (1.19) 0.066 (1.68) 0.085 (2.16) 0.109 (2.77) 0.042 (1.07) 0.062 (1.57) Recommended Tightening Torques Single Hole Shell Size 8 10 12 14 16 18 20 22 24 Receptacles lbf. ins. 33 36 60 65 73 82 106 123 133 Accessories lbf. ins. 30-35 35-40 40-45 45-50 55-60 65-70 75-80 85-90 95-100

Notice: Products are sold subject to Amphenol’s Standard Conditions of Sale. All specifications and statements contained herein are believed to be correct at the time of printing but no representation or warranty, express or implied, is given as to any specification or statement contained herein. Product specifications including performance characteristics are typical only and subject to deviation. Specifications are also subject to change without notice. Users should not assume that all safety measures are indicated or that other measures may not be required. No representation or warranty, express or implied, is given that any use of products (including any stated or suggested use) does not infringe any patent, registered design or other third party rights and no stated or suggested use of products can be taken to recommend any such infringement. Amphenol Thanet Way, Whitstable, Kent, CT5 3JF Tel: 01227 773200 Fax: 01227 276571 info@amphenol.co.uk www.amphenol.co.uk