DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 8

Technical content

Features

The HMC552LP4 & HMC552LP4 e are high linearity, double-balanced converter iCs that operate from 1.6 to 3.0 GHz and deliver a +25 dBm input third order intercept point. The LO amplifier output and high dynamic range mixer input are positioned so that an external LO filter can be placed in series be-tween them. The converter provides 30 dB of LO to rF isolation and is ideal for upconverter and down-converter applications. The iC operates from a single +5V supply consuming 62 mA of current and accepts a LO drive level of -4 to +4 dBm. The design requires no external baluns and supports iF frequencies between DC and 1 GHz. The HMC552LP4 & HMC552LP4 e are pin for pin com- patible with the HMC551LP4 & HMC551LP4 e, which operate from 0.8 to 1.2 GHz. input iP3: +25 dBm Low input LO Drive: -4 to +4 dBm LO to rF isolation: 30 dB Low Conversion Loss: 8 dB single Positive supply: +5V @ 62 mA robust 1,000V esD, Class 1C

24 Lead 4x4mm sMT Package: 16mm2

Electrical Specifications, TA = +25° C, LO = 0 dBm, Vcc = +5V, R1 = 18 Ohms, IF = 100 MHz* Typical Applications The HMC552LP4 / HMC552LP4e is ideal for Wireless infrastructure Applications:

  • PCS / 3G Infrastructure
  • Base Stations & Repeaters
  • WiMAX & WiBro
  • ISM & Fixed Wireless Parameter Min. Typ. Max. Units Frequency range, rF, LO 1.6 - 3.0 GHz Frequency range, iF DC - 1.0 GHz Conversion Loss 8 10 dB Noise Figure (ssB) 8 dB LO to rF isolation 25 30 dB LO to iF isolation 10 20 dB iP3 (input) 25 dBm 1 dB Compression ( input) 16 dBm LO Drive input Level (Typical) -4 to +4 dBm supply Current ( icc) 62 mA *Unless otherwise noted, all measurements performed as a downconverter configured as shown in application circuit.

For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com Mixers - siNGLe & DOUBLe BALANCeD - sMT 10 - 2 Conversion Gain vs. Temperature @ LO = 0 dBm Isolation @ LO = 0 dBm Return Loss @ LO = 0 dBmConversion Gain vs. LO Drive Upconverter Performance Conversion Gain vs. LO Drive IF Bandwidth @ LO = 0 dBm -20 -15 -10 1 1.5 2 2.5 3 3.5 +25C +85C -40C CONVERSION GAIN (dB) FREQUENCY (GHz) HMC552LP4 / 552LP4E GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 1.6 - 3.0 GHz v03.1210 -20 -15 -10 1 1.5 2 2.5 3 3.5 RF LO RETURN LOSS (dB) FREQUENCY (GHz) -25 -20 -15 -10 Conversion Gain Return Loss RESPONSE (dB) FREQUENCY (GHz) -20 -15 -10 1 1.5 2 2.5 3 3.5 LO= -4 dBm LO= -2 dBm LO= 0 dBm LO= 2 dBm LO= 4 dBm CONVERSION GAIN (dB) FREQUENCY (GHz) -20 -15 -10 1 1.5 2 2.5 3 3.5 LO= -4 dBm LO= -2 dBm LO= 0 dBm LO= 2 dBm LO= 4 dBm CONVERSION GAIN (dB) FREQUENCY (GHz) -50 -40 -30 -20 -10 1 1.5 2 2.5 3 3.5 RF to IF LO to RF LO to IF ISOLATION (dB) FREQUENCY (GHz)

For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com Mixers - siNGLe & DOUBLe BALANCeD - sMT 10 - 3 Input IP3 vs. Temperature @ LO = 0 dBm Input IP3 vs. LO Drive Input IP2 vs. LO Drive Input P1dB vs. Temperature @ LO = 0 dBm Input IP2 vs. Temperature @ LO = 0 dBm HMC552LP4 / 552LP4E GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 1.6 - 3.0 GHz v03.1210 1.5 2 2.5 3 3.5 +25C +85C -40C IP2 (dBm) FREQUENCY (GHz) 1.5 2 2.5 3 3.5 LO= -4 dBm LO= -2 dBm LO= 0 dBm LO= 2 dBm LO= 4 dBm IP2 (dBm) FREQUENCY (GHz) +25C +85C -40C P1dB (dBm) FREQUENCY (GHz) 1.5 2 2.5 3 3.5 LO= -4 dBm LO= -2 dBm LO= 0 dBm LO= 2 dBm LO= 4 dBm IP3 (dBm) FREQUENCY (GHz) 1.5 2 2.5 3 3.5 +25C +85C -40C IP3 (dBm) FREQUENCY (GHz)

For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com Mixers - siNGLe & DOUBLe BALANCeD - sMT 10 - 4 Harmonics of LOMxN Spurious @ IF Port nLO mrF 0 1 2 3 4 0 xx -3 16 16 25 1 7 0 23 44 53 2 79 66 61 61 98 3 102 105 93 94 84 4 103 107 107 102 103 rF Freq. = 1.9 GHz @ -10 dBm LO Freq. = 1.8 GHz @ 0 dBm All values in dBc relative to the i F power level. nLO spur @ rF Port LO Freq. (GHz) 1 2 3 4 1.5 27 17 31 32 1.8 28 16 40 44 2.1 28 18 31 47 2.4 34 21 33 41 2.7 36 28 42 46 3.0 41 27 48 54 LO = 0 dBm All values in dBc below input LO level measured at r F port. Typical Supply Current Vcc icc (mA) +5.0 62 mA HMC552LP4 / 552LP4E v03.1210 GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 1.6 - 3.0 GHz

For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com Mixers - siNGLe & DOUBLe BALANCeD - sMT 10 - 5 Outline Drawing Absolute Maximum Ratings rF / iF input (Vcc= +5V) +31 dBm LO Drive (Vcc= +5V) +10 dBm BiAs +7 Vdc Junction Temperature 150°C Continuous Pdiss (T = 85 °C) (derate 9.5 mW/°C above 85°C) 0.6 W Thermal resistance (junction to ground paddle) 105.6 °C/W storage Temperature -65 to +150°C Operating Temperature -40 to +85°C esD sensitivity (HBM) Class 1C eLeCTrOsTATiC seNsiTiVe DeViCe OBserVe HANDLiNG PreCAUTiONs NOTes: 1. LeADFrAMe MATeriAL: COPPer ALLOY 2. DiMeNsiONs Are iN iNCHes [MiLLiMeTers] 3. LeAD sPACiNG TOLerANCe is NON-CUMULAT iVe. 4. PAD BUrr LeNGTH sHALL Be 0.15mm MAxiMUM. PAD BUrr HeiGHT sHALL Be 0.05mm MA xiMUM. 5. PACKAGe WArP sHALL NOT exCeeD 0.05mm. 6. ALL GrOUND LeADs AND GrOUND PADDLe MUsT Be sOLDereD TO PCB rF GrOUND. 7. reFer TO HiTTiTe APPLiCATiON NOTe FOr sUGGesTeD LAND PATTerN. Part Number Package Body Material Lead Finish MsL rating Package Marking [3] HMC552LP4 Low stress injection Molded Plastic sn/Pb solder MsL1 [1] H552 xxxx HMC552LP4e roHs-compliant Low s tress injection Molded Plastic 100% matte sn MsL1 [2] H552 xxxx [1] Max peak reflow temperature of 235 °C [2] Max peak reflow temperature of 260 °C [3] 4-Digit lot number xxxx

Package Information

v03.1210 GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 1.6 - 3.0 GHz

For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com Mixers - siNGLe & DOUBLe BALANCeD - sMT 10 - 6 Pin Number Function Description interface s chematic 1 Mix LO This pin is DC coupled and matched to 50 Ohms. An off chip DC blocking capacitor is required. 2, 6 - 9, 11 - 17, 19 - 24 N/C No connection. These pins may be connected to r F ground. Performance will not be affected.

3 BiAs

Power supply for the LO amplifier , a Bias resistor is required . Three external bypass capacitors are recom - mended for optimum performance, as illustrated in the application circuit.

4 GND Backside of package has exposed metal ground

paddle that must also be connected to ground. 5 LO This pin is DC coupled and matched to 50 Ohms. An off chip DC blocking capacitor is required. 10 iF This pin is DC coupled. For applications not requiring operation to DC, this port should be DC blocked externally using a series capacitor whose value has been chosen to pass the necessary i F frequency range. For operation to DC, this pin must not source/ sink more than 18 mA of current or die non-function and possible die failure will result. 18 rF This pin is DC coupled and matched to 50 Ohms. Pin Descriptions HMC552LP4 / 552LP4E v03.1210 GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 1.6 - 3.0 GHz

For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com Mixers - siNGLe & DOUBLe BALANCeD - sMT 10 - 7 Evaluation PCB The circuit board used in the application should use rF circuit design techniques. signal lines should have 50 Ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hit- tite upon request. item Description J1 - J3 PCB Mount sMA rF Connector J4, J5 DC Pin C1, C2, C5 100 pF Chip Capacitor, 0402 Pkg. C3 1000 pF Chip Capacitor, 0603 Pkg. C4 2.2 µF Capacitor, Tantalum L1 18 nH Chip inductor, 0603 Pkg. r1 18 Ohm resistor, 1210 1/8 watt Pkg. U1 HMC552LP4 / HMC552LP4 e PCB [2] 113417 evaluation Board [1] reference this number when ordering complete evaluation PCB [2] Circuit Board Material: r ogers 4350 List of Materials for Evaluation PCB 113722 [1] HMC552LP4 / 552LP4E v03.1210 GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 1.6 - 3.0 GHz

For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com Mixers - siNGLe & DOUBLe BALANCeD - sMT 10 - 8 Application Circuit recommended Components Values ( iF = DC - 300 MHz) C3 1000 pF C4 2.2 µF C1, C2, C5 100 pF L1 18 nH r1 18 Ohm HMC552LP4 / 552LP4E v03.1210 GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 1.6 - 3.0 GHz Note: select r1 to achieve icc by using equa- tion below, r1 ≥ 18 Ohms. icc = ( Vs - 3.8 ) / r1