DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

Features

The HMC513LP5 & HMC513LP5E are GaAs InGaP Heterojunction Bipolar Transistor (HBT) MMIC VCOs. The HMC513LP5 & HMC513LP5E integrate resonators, negative resistance devices, varactor diodes and feature half frequency and divide-by- 4 outputs. The VCO’s phase noise performance is excellent over temperature, shock, and process due to the oscillator’s monolithic structure. Power output is +7 dBm typical from a +3V supply voltage. The prescaler function can be disabled to conserve current if not required. The voltage controlled oscillator is packaged in a leadless QFN 5x5 mm surface mount package, and requires no external matching components. Dual Output: Fo = 10.43 - 11.46 GHz Fo/2 = 5.21 - 5.73 GHz Pout: +7 dBm Phase Noise: -110 dBc/Hz @100 KHz Typ. No External Resonator Needed

32 Lead 5x5mm SMT Package: 25mm²

Low noise MMIC VCO w/Half Frequency, Divide-by-4 Outputs for:

  • VSAT Radio
  • Point to Point/Multipoint Radio
  • Test Equipment & Industrial Controls
  • Military End-Use Electrical Specifications, TA = +25° C, Vcc1, Vcc2 = +3V Parameter Min. Typ. Max. Units Frequency Range Fo Fo/2 10.43 - 11.46 5.215 - 5.73 GHz GHz Power Output RFOUT RFOUT/2 RFOUT/4 -10 +10 +11 dBm dBm dBm SSB Phase Noise @ 100 kHz Offset, Vtune= +5V @ RFOUT -110 dBc/Hz Tune Voltage Vtune 2 13 V Supply Current Icc1 & Icc2 240 275 290 mA Tune Port Leakage Current (Vtune= 13V) 10 µA Output Return Loss 2 dB Harmonics/Subharmonics 1/2 2nd 3rd dBc dBc dBc dBc Pulling (into a 2.0:1 VSWR) 5 MHz pp Pushing @ Vtune= 5V 25 MHz/V Frequency Drift Rate 1 MHz/°C

For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com VCOS with Fo/2 OUTPUT - SMT 8 - 2 Frequency vs. Tuning Voltage, T= 25°C Sensitivity vs. Tuning Voltage, Vcc= +3V SSB Phase Noise vs. Tuning Voltage Frequency vs. Tuning Voltage, Vcc= +3V Output Power vs. Tuning Voltage, Vcc= +3V SSB Phase Noise @ Vtune= +5V 9.4 9.8 10.2 10.6 11.4 11.8 0 1 2 3 4 5 6 7 8 9 10 11 12 13 Vcc=2.75V Vcc=3.0V Vcc=3.25V OUTPUT FREQUENCY (GHz) TUNING VOLTAGE (VOLTS) 0 1 2 3 4 5 6 7 8 9 10 11 12 13 +25 C +85 C -40 C OUTPUT POWER (dBm) TUNING VOLTAGE (VOLTS) 100 200 300 400 500 600 0 1 2 3 4 5 6 7 8 9 10 11 12 13 +25 C +85 C -40 C SENSITIVITY (MHz/VOLT) TUNING VOLTAGE (VOLTS) 9.4 9.8 10.2 10.6 11.4 11.8 0 1 2 3 4 5 6 7 8 9 10 11 12 13 +25 C +85 C -40 C OUTPUT FREQUENCY (GHz) TUNING VOLTAGE (VOLTS) -160 -140 -120 -100 -80 -60 -40 -20 +25 C +85 C -40 C SSB PHASE NOISE (dBc/Hz) OFFSET FREQUENCY (Hz) -120 -115 -110 -105 -100 -95 -90 -85 -80 -75 -70 1 2 3 4 5 6 7 8 9 10 11 12 13 10kHz offset 100kHz offset SSB PHASE NOISE (dBc/Hz) TUNING VOLTAGE (VOLTS) HMC513LP5 / 513LP5E v04.0811 MMIC VCO w/ HALF FREQUENCY OUTPUT & DIVIDE-BY-4, 10.43 - 11.46 GHz

For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com VCOS with Fo/2 OUTPUT - SMT 8 - 3 Absolute Maximum Ratings Vcc1, Vcc2 +3.5 Vdc Vtune 0 to +15V Junction Temperature 135 °C Continuous Pdiss (T=85 °C) (derate 27 mW/C above 85 °C 1.3 W Thermal Resistance (junction to ground paddle) 37.5 °C/W Storage Temperature -65 to +150 °C Operating Temperature -40 to +85 °C Typical Supply Current vs. Vcc Note: VCO will operate over full voltage range shown above. Vcc (V) Icc (mA) 2.75 230 3.0 275 3.25 320 ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS RFOUT/2 Frequency vs. Tuning Voltage, Vcc= +3V RFOUT/2 Output Power vs. Tuning Voltage, Vcc= +3V Divide-by-4 Frequency vs. Tuning Voltage, Vcc= +3V Divide-by-4 Output Power vs. Tuning Voltage, Vcc= +3V 2.35 2.45 2.55 2.65 2.75 2.85 2.95 0 1 2 3 4 5 6 7 8 9 10 11 12 13 +25 C +85 C -40 C OUTPUT FREQUENCY (GHz) TUNING VOLTAGE (VOLTS) -15 -12 0 1 2 3 4 5 6 7 8 9 10 11 12 13 +25 C +85 C -40 C OUTPUT POWER (dBm) TUNING VOLTAGE (VOLTS) 0 1 2 3 4 5 6 7 8 9 10 11 12 13 +25 C +85 C -40 C OUTPUT POWER (dBm) TUNING VOLTAGE (VOLTS) 4.7 4.9 5.1 5.3 5.5 5.7 5.9 0 1 2 3 4 5 6 7 8 9 10 11 12 13 +25 C +85 C -40 C OUTPUT FREQUENCY (GHz) TUNING VOLTAGE (VOLTS) HMC513LP5 / 513LP5E v04.0811 MMIC VCO w/ HALF FREQUENCY OUTPUT & DIVIDE-BY-4, 10.43 - 11.46 GHz

For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com VCOS with Fo/2 OUTPUT - SMT 8 - 4 Outline Drawing NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS] 3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE. 4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM. PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM. 5. PACKAGE WARP SHALL NOT EXCEED 0.05mm. 6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. 7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED LAND PATTERN. Part Number Package Body Material Lead Finish MSL Rating Package Marking [3] HMC513LP5 Low Stress Injection Molded Plastic Sn/Pb Solder MSL3 [1] H513 XXXX HMC513LP5E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL3 [2] H513 XXXX [1] Max peak reflow temperature of 235 °C [2] Max peak reflow temperature of 260 °C [3] 4-Digit lot number XXXX

Package Information

v04.0811 MMIC VCO w/ HALF FREQUENCY OUTPUT & DIVIDE-BY-4, 10.43 - 11.46 GHz Pin Descriptions Pin Number Function Description Interface Schematic 1 - 3, 7 - 10, 13 - 18, 20, 22 - 28, 30 - 32 N/C No Connection. These pins may be connected to RF/ DC ground. Performance will not be affected.

4 RFOUT/4 Divide-by-4 Output

6 VCC1

Supply Voltage for prescaler. If prescaler is not required, this pin may be left open to conserve 40 mA of current.

For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com VCOS with Fo/2 OUTPUT - SMT 8 - 5 HMC513LP5 / 513LP5E v04.0811 MMIC VCO w/ HALF FREQUENCY OUTPUT & DIVIDE-BY-4, 10.43 - 11.46 GHz Pin Descriptions Pin Number Function Description Interface Schematic 12 RFOUT/2 Half frequency output (AC coupled). 19 RFOUT RF output (AC coupled).

21 VCC2 Supply Voltage, +3V

29 VTUNE Control Voltage Input. Modulation port bandwidth dependent on drive source impedance. 5, 11, Paddle GND Package bottom has an exposed metal paddle that must be connected to RF/DC ground. Typical Application Circuit

For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com VCOS with Fo/2 OUTPUT - SMT 8 - 6 The circuit board used in the final application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads and backside ground paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. Evaluation PCB List of Materials for Evaluation PCB 110227 [1] HMC513LP5 / 513LP5E v04.0811 MMIC VCO w/ HALF FREQUENCY OUTPUT & DIVIDE-BY-4, 10.43 - 11.46 GHz Item Description J1 - J4 PCB Mount SMA RF Connector J5 - J6 2 mm DC Header C1 - C3 100 pF Capacitor, 0402 Pkg. C4 1,000 pF Capacitor, 0402 Pkg. C5 - C7 2.2 µF Tantalum Capacitor U1 HMC513LP5(E) VCO PCB [2] 110225 Eval Board [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Arlon 25FR