HMC469MS8G_09 HITTITE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 8
Technical content
Features
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com DRIVER & GAIN BLOCK AMPLIFIERS - SMT 9 - 45 Output Return Loss vs. Temperature Broadband Gain & Return Loss Gain vs. Temperature Reverse Isolation vs. Temperature Input Return Loss vs. Temperature Noise Figure vs. Temperature -25 -20 -15 -10 012345678 S21 S11 S22 RESPONSE (dB) FREQUENCY (GHz) -20 -15 -10 0123456 +25C +85C -40C RETURN LOSS (dB) FREQUENCY (GHz) -20 -15 -10 0123456 +25C +85C -40C RETURN LOSS (dB) FREQUENCY (GHz) 0123456 +25C +85C -40C NOISE FIGURE (dB) FREQUENCY (GHz) 0123456 +25C +85C -40C GAIN (dB) FREQUENCY (GHz) -25 -20 -15 -10 0123456 +25C +85C -40C REVERSE ISOLATION (dB) FREQUENCY (GHz) Data shown is of a single amplifi er. HMC469MS8G / 469MS8GE SiGe HBT DUAL CHANNEL GAIN BLOCK MMIC AMPLIFIER, DC - 5 GHz v01.0605
For price, delivery, and to place orders, please contact Hittite Microwave Corporation: Order On-line at www.hittite.com DRIVER & GAIN BLOCK AMPLIFIERS - SMT 9 - 46 Gain, Power & OIP3 vs. Supply Voltage for Constant Icc= 75 mA @ 850 MHz P1dB vs. Temperature Psat vs. Temperature Output IP3 vs. Temperature Vcc vs. Icc Over Temperature for Fixed Vs= 8V, RBIAS= 51 Ohms Icc (mA) Vcc (Vdc) +85C +25C -40C 56789 1 0 1 1 1 2 Gain P1dB Psat IP3 Gain (dB), P1dB (dBm), Psat (dBm), IP3 (dBm) Vs (Vdc) 0123456 +25C +85C -40C P1dB (dBm) FREQUENCY (GHz) 0123456 +25C +85C -40C Psat (dBm) FREQUENCY (GHz) 0123456 +25C +85C -40C IP3 (dBm) FREQUENCY (GHz) Data shown is of a single amplifi er. Cross Channel Isolation -45 -40 -35 -30 -25 -20 -15 -10 012345678 INPUT1-OUTPUT2 INPUT2-OUTPUT1 PATH ISOLATION (dB) FREQUENCY (GHz) HMC469MS8G / 469MS8GE SiGe HBT DUAL CHANNEL GAIN BLOCK MMIC AMPLIFIER, DC - 5 GHz v01.0605
For price, delivery, and to place orders, please contact Hittite Microwave Corporation: Order On-line at www.hittite.com DRIVER & GAIN BLOCK AMPLIFIERS - SMT 9 - 47 +25C +85C -40C Psat (dBm) FREQUENCY (GHz) -10 0.5 1 1.5 2 2.5 3 +25C +85C -40C GAIN (dB) FREQUENCY (GHz) Gain* -40 -30 -20 -10 0 0.5 1 1.5 2 2.5 3 REVERSE ISOLATION (dB) FREQUENCY (GHz) Reverse Isolation* +25C +85C -40C IP3 (dBm) FREQUENCY (GHz) Output IP3* +25C +85C -40C P1dB (dBm) FREQUENCY (GHz) Output P1dB* Output Psat* -40 -30 -20 -10 0 0.5 1 1.5 2 2.5 3 INPUT RETURN LOSS OUTPUT RETURN LOSS RETURN LOSS (dB) FREQUENCY (GHz) Input & Output Return Loss * * Measurements shown are of both channels with 1.5 - 2.5 GHz 90° splitter/combiners on input & output (see application circuit for balanced operation). HMC469MS8G / 469MS8GE SiGe HBT DUAL CHANNEL GAIN BLOCK MMIC AMPLIFIER, DC - 5 GHz v01.0605
For price, delivery, and to place orders, please contact Hittite Microwave Corporation: Order On-line at www.hittite.com DRIVER & GAIN BLOCK AMPLIFIERS - SMT 9 - 48 Outline Drawing Absolute Maximum Ratings Collector Bias Voltage (Vcc) +6.0 Vdc Collector Bias Current (Icc) 100 mA RF Input Power (RFIN)(Vcc = +4.2 Vdc) +17 dBm Junction Temperature 150 °C Continuous Pdiss (T = 85 °C) (derate 29.58 mW/°C above 85 °C) 1.92 W Thermal Resistance (junction to ground paddle) 33.8 °C/W Storage Temperature -65 to +150 °C Operating Temperature -40 to +85 °C NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS] 3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 5. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. HMC469MS8G / 469MS8GE SiGe HBT DUAL CHANNEL GAIN BLOCK MMIC AMPLIFIER, DC - 5 GHz v01.0605 Part Number Package Body Material Lead Finish MSL Rating Package Marking [3] HMC469MS8G Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 [1] H469 XXXX HMC469MS8GE RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 [2] H469 XXXX [1] Max peak refl ow temperature of 235 °C [2] Max peak refl ow temperature of 260 °C [3] 4-Digit lot number XXXX
Package Information
ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS
For price, delivery, and to place orders, please contact Hittite Microwave Corporation: Order On-line at www.hittite.com DRIVER & GAIN BLOCK AMPLIFIERS - SMT 9 - 49 Pin Descriptions Pin Number Function Description Interface Schematic
1 RFIN1
This pin is DC coupled. An off chip DC blocking capacitor is required. 8 RFOUT1 RF output and DC Bias (Vcc1) for the output stage. 2, 3, 6, 7 N/C No connection. These pins may be connected to RF ground. Performance will not be affected.
4 RFIN2
This pin is DC coupled. An off chip DC blocking capacitor is required. 5 RFOUT2 RF output and DC Bias (Vcc2) for the output stage. Ground Paddle GND Ground paddle must be connected to RF/DC ground. HMC469MS8G / 469MS8GE SiGe HBT DUAL CHANNEL GAIN BLOCK MMIC AMPLIFIER, DC - 5 GHz v01.0605
For price, delivery, and to place orders, please contact Hittite Microwave Corporation: Order On-line at www.hittite.com DRIVER & GAIN BLOCK AMPLIFIERS - SMT 9 - 50 Application Circuit for Balanced Operation Recommended Component Values for Key Application Frequencies Component Frequency (MHz) 50 900 1900 2200 2400 3500 5000 L1, L2 270 nH 56 nH 18 nH 18 nH 15 nH 8.2 nH 6.8 nH C4, C5, C9, C10 0.01 μF 100 pF 100 pF 100 pF 100 pF 100 pF 100 pF Note: 1. External blocking capacitors are required on RFIN and RFOUT. 2. R BIAS provides DC bias stability over temperature. Recommended Bias Resistor Values for Icc= 75 mA, Rbias= (Vs - Vcc) / Icc Supply Voltage (Vs) 5V 6V 8V 10V 12V RBIAS VALUE 13 Ω 27 Ω 51 Ω 82 Ω 110 Ω RBIAS POWER RATING 1/8 W 1/4 W 1/2 W 1/2 W 1 W HMC469MS8G / 469MS8GE SiGe HBT DUAL CHANNEL GAIN BLOCK MMIC AMPLIFIER, DC - 5 GHz v01.0605
For price, delivery, and to place orders, please contact Hittite Microwave Corporation: Order On-line at www.hittite.com DRIVER & GAIN BLOCK AMPLIFIERS - SMT 9 - 51 Evaluation PCB The circuit board used in the fi nal application should use RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads and package bottom should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation board should be mounted to an appropriate heat sink. The evaluation circuit board shown is available from Hittite upon request. List of Materials for Evaluation PCB 109164 [1] Item Description J1 - J4 PCB Mount SMA Connector J5 - J8 DC Pins L1, L2 Inductor, 0402 Pkg. C1, C8 2.2 μF Capacitor, Tantalum C2, C7 1000 pF Capacitor, 0402 Pkg. C3, C6 100 pF Capacitor, 0402 Pkg. C4, C5, C9, C10 Capacitor, 0402 Pkg. R1, R2 Resistor, 2010 Pkg. U1 HMC469MS8G / HMC469MS8GE PCB [2] 109162 Evaluation PCB [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 HMC469MS8G / 469MS8GE SiGe HBT DUAL CHANNEL GAIN BLOCK MMIC AMPLIFIER, DC - 5 GHz v01.0605