45W-DBFN LINKCOM | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
- Surge protection: Line to Line 2KV
- Safety: Meet UL / PSE
- EMI: Meet FCC / CE
- Warranty: 7 years@T.C<75℃ (refer to warranty policy)
- High Operating Ambient Temp.: 0℃~+50℃
- Dimming 0V-10V
- AC Input 100~277Vac
- Protection: SCP / OVP / OTP INPUT VOLTAGE RANGE DBFN0040U112-00G 45-DBFN Series ELECTRICAL SPECIFICATION DBFN0040U701-00G 39.2 0.7
- Built-in Active PFC Function
- Built-in : 24V/0.1A Max ( For Lighting Sensor ) 1.35 DBFN0040U901-00G 1% Vo(max.) DBFN0040U102-00G ±10% 87.0% 1% Vo(max.) 85.0% 1% Vo(max.) 1% Vo(max.) 0.9 DBFN0040U152-00G DBFN0040U182-00G 87.0% ±10% 43.2 DBFN0040U142-00G 1.4 DBFNA040U142-00G MODEL PRODUCT SPECIFICATION O/P NOISE(P-P,V) EFFICIENCY OUTPUT CURRENT TOLERANCE Range: 47-63Hz, Normal: 50-60Hz 90-305Vac, 127-431Vdc, Normal: 100-277Vac 1% Vo(max.) 37.8 INPUT FREQUENCY 87.0% ACTIVE POWER FACTOR 87.0% 18-36 1.05 28-56 >0.9@Full Load 100-277Vac 40.5 ±10% ±7% 15-30 18-36 1.8 DC OUTPUT VOLTAGE(V) 1.5 OUTPUT CURRENT(A) ±7% 15-30 0-10V Dimmable Constant Current Mode 43.2 12-24 12-24 1% Vo(max.) FEATURES:
- RoHS Compliant 87.0% 24-48 DC OUTPUT POWER(W) ±7% (1) All parameters not specially mentioned are measured 230VAC input. (2) All specifications Typical @25 ℃, unless otherwise noted, at normal line and load. (3) Ripple and Noise measured directly at pins/terminals at nom. load, 0.1uF bypass and 47uF electrolytic, pk-pk @20MHz bandwidth. DIMENSION (L*W*H) ISOLATION RESISTANCE SAFETY RELATIVE HUMIDITY STORAGE TEMP. Meet FCC Part15 / Meet EN 55015 I/P-O/P ：4242VDC, I/P-FG ：2121VDC 372 * 30 * 27 mm 【14.6 * 1.18 * 1.06 inch 】 I/P-O/P, I/P-FG,O/P-FG :10M Ohms / 500VDC / 25 ℃ / 70% RH INRUSH CURRENT (typ) <15% at Full Load 277Vac (5) Minimum load is NOT required for proper operation . (6) 100% Production Tested. OPERATING TEMP. LEAKAGE CURRENT OVER TEMP. PROTECTION TURN ON DELAY TIME AC CURRENT SHORT CIRCUIT PROTECTION EMI ACTIVE POWER FACTOR OVER VOLTAGE PROTECTION >0.9@Full Load 100-277Vac ＊Please contact sales@linkcom.com.tw , sales@linkcomusa.com for more information ＊REFERENCE: www.linkcom.com.tw (4) Specified for free-air convection cooling. THD Meet UL 8750 / PSE -20 ℃~+80 ℃ 10% to +90%, non-cond. SCP , OVP , OTP will restart automatically after the fault condition is removed <0.75mA at 277Vac 0℃~+50 ℃@Full Load 120-277Vac Cold Start 65A@230Vac WITHSTAND VOLTAGE <1S at Full Load 100-277Vac 0.7A / 100Vac 0.3A/277Vac Linkcom Manufacturing Co., Ltd.
＊REFERENCE: www.linkcom.com.tw Line Dim+ LED + LED- Dim- Load+ Load- Linkcom Manufacturing Co., Ltd.
Parameters Minimum Typical 10V Source current on the 0-10V(+) Purple Wire Absolute maximum voltageon on the 0-10(+) Purple Wire Maximum 0mA ─ 1V ─ 1mA 20.0% 30.0% 40.0% 50.0% 60.0% 70.0% 80.0% 90.0% 100.0% Output Current % Output Current / 1-10VDC Dimming Input 2. Recommended dimmers are Leviton IP710,Lutron NTSTV-DV or equivalent. 3. When dimming wires are open, the output current will be at 100%. Notes: 1. Dim+ and Dim- wires on the output side are used for 1-10V dimming. 0.0% 10.0% 0 1 2 3 4 5 6 7 8 9 10 Dimming Input(VDC) Linkcom Manufacturing Co., Ltd.