430-4593-C | DigiCamel IC Datasheet

Online Datasheet

Read 430-4593-C online.

430-4593-C ATGBICS

Document overview

Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
PDF pages: 15

Technical content

ATGBICS® All rights reserved. EOE Ref: ATGBICS_430-4593-C_V1 Page 1 of 15 Product Datasheet 430-4593-C Dell® Compatible 40Gb/s QSFP SR4 QSFP Transceiver Hot Pluggable, MTP/MPO Connector, +3.3V, MMF 150M DDM 0~70C

FEATURES

4 independent full-duplex channels
Up to 11.2Gbps per channel bandwidth
Aggregate bandwidth of > 40Gbps
MTP/MPO optical connector
QSFP MSA compliant
Digital diagnostic capabilities
CML compatible electrical I/O
Single +3.3V power supply operating
TX input and RX output CDR retiming
Built-in digital diagnostic functions
Temperature range 0°C to 70°C
RoHS Compliant Part

APPLICATIONS

Rack to rack
Data Centre
Metro networks
Switches and Routers
Infini band 4x SDR, DDR, QDR

DESCRIPTION

ATGBICS® 430-4593-C is a parallel 40Gbps Quad Small Form-factor Pluggable (QSFP) optical module that provides increased port density and total system cost savings. The QSFP full-duplex optical module offers 4 independent transmit and receive channels, each capable of 10Gbps operation for an aggregate bandwidth of 40Gbps 70m on OM3 Multimode Fiber (MMF)and 150m on OM4 MMF. An optical fiber ribbon cable with an MPO/MTP connector at each end plugs into the QSFP module receptacle. The orientation of the ribbon cable is “keyed” and guide pins are present inside the module’s receptacle to ensure proper alignment. The cable usually has no twist (key up to key up) to ensure proper channel to channel alignment. Electrical connection is achieved through a z-pluggable 38-pin IPASS® connector.

ATGBICS® All rights reserved. EOE Ref: ATGBICS_430-4593-C_V1 Page 2 of 15 Product Datasheet The module operates from a single +3.3V power supply and LVCMOS/LVTTL global control signals such as Module Present, Reset, Interrupt and Low Power Mode are available with the modules. A 2-wire serial interface is available to send and receive more complex control signals and to obtain digital diagnostic information. Individual channels can be addressed, and unused channels can be shut down for maximum design flexibility. The 430-4593-C is designed with form factor, optical/electrical connection and digital diagnostic interface according to the QSFP Multi-Source Agreement (MSA). It has been designed to meet the harshest external operating conditions including temperature, humidity and EMI interference. The module offers very high functionality and feature integration, accessible via a two-wire serial interface. Absolute Maximum Ratings Parameter Symbol Min. Typical Max. Unit Storage Temperature TS -40 +85 °C Supply Voltage VCCT, R -0.5 4 V Relative Humidity RH 0 85 % Recommended Operating Environment Parameter Symbol Min. Typical Max. Unit Case operating Temperature TC 0 +70 °C Supply Voltage VCCT, R +3.13 3.3 +3.47 V Supply Current ICC 1000 mA Power Dissipation PD 3.5 W

Electrical Characteristics

Parameter Symbol Min Typ Max Unit Note Data Rate per Channel - 10.3125 11.2 Gbps Power Consumption - 2.5 3.5 W Supply Current Icc 0.75 1.0 A Control I/O Voltage-High VIH 2.0 Vcc V Control I/O Voltage-Low VIL 0 0.7 V Inter-Channel Skew TSK 150 Ps RESETL Duration 10 Us RESETL De-assert time 100 ms Power On Time 100 ms Transmitter Single Ended Output Voltage Tolerance 0.3 4 V 1 Common mode Voltage Tolerance 15 mV Transmit Input Diff Voltage VI 120 1200 mV Transmit Input Diff Impedance ZIN 80 100 120 Data Dependent Input Jitter DDJ 0.1 UI Data Input Total Jitter TJ 0.28 UI Receiver Single Ended Output Voltage Tolerance 0.3 4 V Rx Output Diff Voltage Vo 600 800 mV Rx Output Rise and Fall Voltage Tr/Tf 35 ps 1 Total Jitter TJ 0.7 UI Deterministic Jitter DJ 0.42 UI Note: 1. 20 – 80 %

ATGBICS® All rights reserved. EOE Ref: ATGBICS_430-4593-C_V1 Page 4 of 15 Product Datasheet Optical Parameters Parameter Symbol Min Typ Max Unit Ref. Transmitter Optical Wavelength λ 840 860 nm RMS Spectral Width Pm 0.5 0.65 nm Average Optical Power per Channel Pavg -8 -2.5 +1.0 dBm Laser Off Power Per Channel Poff -30 dBm Optical Extinction Ratio ER 3.5 dB Relative Intensity Noise Rin -128 dB/HZ 1 Optical Return Loss Tolerance 12 dB Receiver Optical Center Wavelength λC 840 860 nm Receiver Sensitivity per Channel R -13 dBm Maximum Input Power PMAX +0.5 dBm Receiver Reflectance Rrx -12 dB LOS De-Assert LOSD -14 dBm LOS Assert LOSA -30 dBm LOS Hysteresis LOSH 0.5 dB Note: 1. 12dB Reflection

ATGBICS® All rights reserved. EOE Ref: ATGBICS_430-4593-C_V1 Page 5 of 15 Product Datasheet Diagnostic Monitoring Interface Digital diagnostics monitoring function is available on all QSFP+ SR4. A 2-wire serial interface provides user to contact with module. The structure of the memory is shown in flowing. The memory space is arranged into a lower, single page, address space of 128 bytes and multiple upper address space pages. This structure permits timely access to addresses in the lower page, such as Interrupt Flags and Monitors. Less time critical time entries, such as serial ID information and threshold settings, are available with the Page Select function. The interface address used is A0xh and is mainly used for time critical data like interrupt handling in order to enable a one-time-read for all data related to an interrupt situation. After an interrupt, IntL, has been asserted, the host can read out the flag field to determine the affected channel and type of flag.

0 Identifier (1 Byte) Read-Only

1-2 Status (2 Bytes) Read-Only 3-21 Interrupt Flags (19 Bytes) Read-Only 22-33 Module Monitors (12 Bytes) Read-Only 34-81 Channel Monitors (48 Bytes) Read-Only 82-85 Reserved (4 Bytes) Read-Only 86-97 Control (12 Bytes) Read/Write 98-99 Reserved (2 Bytes) Read/Write 100-106 Module and Channel Masks (7 Bytes) Read/Write 107-118 Reserved (12 Bytes) Read/Write 119-122 Password Change Entry Area (optional) (4 Bytes) Read/Write 123-126 Password Entry Area (optional) (4 Bytes) Read/Write

127 Page Select Byte Read/Write

Byte Address Description Type 128-175 Module Thresholds (48 Bytes) Read-Only 176-223 Channel Thresholds (48 Bytes) Read-Only 224-225 Reserved (2 Bytes) Read-Only 226-239 Vendor Specific Channel Controls (14 Bytes) Read/Write 240-241 Optional Channel Controls (2 Bytes) Read/Write 242-253 Channel Monitor Masks (12 Bytes) Read/Write 254-255 Reserved (2 Bytes) Read/Write

ATGBICS® All rights reserved. EOE Ref: ATGBICS_430-4593-C_V1 Page 7 of 15 Product Datasheet Serial ID: Data Fields Address Size (Bytes) Name Description of Base ID Field Base_ID Fields 128 1 Identifier Identifier Type of serial transceiver 129 1 Ext. Identifier Extended identifier of serial transceiver 130 1 Connector Code for connector type 131-138 8 Transceiver Code for electronic compatibility or optical compatibility 139 1 Encoding Code for serial encoding algorithm 140 1 BR, nominal Nominal bit rate, units of 100 MBits/s. 141 Extended RateSelect Compliance Tags for Extended RateSelect compliance 142 1 Length(SMF) Link length supported for SMF fiber in km 143 1 Length (E- 50µm) Link length supported for EBW 50/125 µm fiber, units of 2 m 144 1 Length (50 µm) Link length supported for 50/125 µm fiber, units of 1 m 145 1 Length (62.5 µm) Link length supported for 62.5/125 µm fiber, units of 1 m 146 1 Length Copper Link length supported for copper, units of 1m 147 1 Device Tech Device technology 148-163 16 Vendor name ATGBICS 164 1 Extended Transceiver Extended Transceiver Codes for InfiniBand 165-167 3 Vendor OUI QSFP vendor IEEE company ID 168-183 16 Vendor PN 430-4593-C 184-185 2 Vendor rev Revision level for part number provided by vendor (ASCII) 186-187 2 Wavelength Nominal laser wavelength (Wavelength = value / 20 in nm) 188-189 2 Wavelength Tolerance Guaranteed range of laser wavelength (+/- value) from Nominal wavelength.(Wavelength Tol. = value/200 in nm) 190 1 Max Case Temp Maximum Case Temperature in Degrees C. 191 1 CC_BASE Check code for Base ID Fields (addresses 128-190) Extended ID Fields 192-195 4 Options Rate Select, TX Disable, TX Fault, LOS 196-211 16 Vendor SN Serial number provided by vendor (ASCII) 212-219 8 Date code Vendor's manufacturing date code 220 1 Diagnostic Monitoring Type Indicates which type of diagnostic monitoring is implemented (if any) in the transceiver. Bit 1, 0 Reserved 221 1 Enhanced Options Indicates which optional enhanced features are implemented in the transceiver. 222 1 Reserved Reserved 223 1 CC_EXT Check code for the Extended ID Fields (addresses 192- 222) Vendor Specific ID Fields 224-255 32 Vendor Specific Vendor Specific EEPROM The detail description of low memory and page00.page03 upper memory please see SFF-8436 document.

ATGBICS® All rights reserved. EOE Ref: ATGBICS_430-4593-C_V1 Page 8 of 15 Product Datasheet Timing for Soft Control and Status Functions Parameter Symbol Max Unit Conditions Initialization Time t_init 2000 ms Time from power on1, hot plug or rising edge of Reset until the module is fully functional2 Reset Init Assert Time t_reset_init 2 μs A Reset is generated by a low level longer than the minimum reset pulse time present on the ResetL pin. Serial Bus Hardware Ready Time t_serial 2000 ms Time from power on1 until module responds to data transmission over the 2-wire serial bus Monitor Data Ready Time t_data 2000 ms Time from power on1 to data not ready, bit 0 of Byte 2, deasserted and IntL asserted Reset Assert Time t_reset 2000 ms Time from rising edge on the ResetL pin until the module is fully functional2 LPMode Assert Time ton_LPMode 100 μs Time from assertion of LPMode (Vin:LPMode =Vih) until module power consumption enters lower Power Level IntL Assert Time ton_IntL 200 ms Time from occurrence of condition triggering IntL until Vout:IntL = Vol IntL Deassert Time toff_IntL 500 μs toff_IntL 500 μs Time from clear on read3 operation of associated flag until Vout:IntL = Voh. This includes deassert times for Rx LOS, Tx Fault and other flag bits. Rx LOS Assert Time ton_los 100 ms Time from Rx LOS state to Rx LOS bit set and IntL asserted Flag Assert Time ton_flag 200 ms Time from occurrence of condition triggering flag to associated flag bit set and IntL asserted Mask Assert Time ton_mask 100 ms Time from mask bit set4 until associated IntL assertion is inhibited Mask De-assert Time toff_mask 100 ms Time from mask bit cleared4 until associated IntlL operation resumes ModSelL Assert Time ton_ModSelL 100 μs Time from assertion of ModSelL until module responds to data transmission over the 2-wire serial bus ModSelL Deassert Time toff_ModSelL 100 μs Time from deassertion of ModSelL until the module does not respond to data transmission over the 2-wire serial bus Power_over-ride or ton_Pdown 100 ms Time from P_Down bit set 4 until module power

ATGBICS® All rights reserved. EOE Ref: ATGBICS_430-4593-C_V1 Page 9 of 15 Product Datasheet Power-set Assert Time consumption enters lower Power Level Power_over-ride or Power-set De -assert Time toff_Pdown 300 ms Time from P_Down bit cleared4 until the module is fully functional3 Notes： 1. Power on is defined as the instant when supply voltages reach and remain at or above the minimum specified value. 2. Fully functional is defined as IntL asserted due to data not ready bit, bit 0 byte 2 de-asserted. 3. Measured from falling clock edge after stop bit of read transaction. 4. Measured from falling clock edge after stop bit of write transaction. ⚫ Transceiver Block Diagram Figure1: Block Diagram

ATGBICS® All rights reserved. EOE Ref: ATGBICS_430-4593-C_V1 Page 10 of Product Datasheet Pin Assignment Diagram of Host Board Connector Block Pin Numbers and Name Diagram of Host Board Connector Block Pin Numbers and Names Pin Function Definitions Pin Logic Symbol Name/Descr iption Ref.

1 GND Ground 1

2 CML-I Tx2n Transmitter

3 CML-I Tx2p Transmitter

4 GND Ground 1

5 CML-I Tx4n Transmitter

6 CML-I Tx4p Transmitter

7 GND Ground 1

8 LVTTL-I ModSelL Module

9 LVTTL-I ResetL Module

10 VccRx +3.3V Power Supply Receiver

11 LVCMOS-I/O SCL 2-Wire Serial

12 LVCMOS-I/O SDA 2-Wire Serial

13 GND Ground 1

14 CML-O Rx3p Receiver

15 CML-O Rx3n Receiver

16 GND Ground 1

17 CML-O Rx1p Receiver

18 CML-O Rx1n Receiver

19 GND Ground 1

20 GND Ground 1

21 CML-O Rx2n Receiver

22 CML-O Rx2p Receiver

23 GND Ground 1

24 CML-O Rx4n Receiver

25 CML-O Rx4p Receiver

26 GND Ground 1

27 LVTTL-O ModPrsL Module

28 LVTTL-O IntL Interrupt

29 VccTx +3.3V Power Supply Transmitter 30 Vcc1 +3.3V Power Supply

31 LVTTL-I LPMode Low Power

32 GND Ground 1

33 CML-I Tx3p Transmitter

34 CML-I Tx3n Transmitter

35 GND Ground 1

36 CML-I Tx1p Transmitter

37 CML-I Tx1n Transmitter

38 GND Ground 1

Notes: 1. GND is the symbol for single and supply(power) common for QSFP modules, All are common within the QSFP module and all module voltages are referenced to this potential otherwise noted. Connect these directly to the host board signal common ground plane. Laser output disabled on TDIS >2.0V or open, enabled on TDIS <0.8V. 2. VccRx, Vcc1 and VccTx are the receiver and transmitter power suppliers and shall be applied concurrently. Recommended host board power supply filtering is shown below. VccRx, Vcc1 and VccTx may be internally connected within the QSFP transceiver module in any combination. The connector pins are each rated for maximum current of 500mA.

ATGBICS® All rights reserved. EOE Ref: ATGBICS_430-4593-C_V1 Page 13 of Product Datasheet Optical Interface Lanes and Assignment Below figure shows the orientation of the multi-mode fiber facets of the optical connector Outside View of the QSFP Module MPO Fiber No. Lane Assignment

1 RX0

2 RX1

3 RX2

4 RX3

5 Not Used

6 Not Used

Product Information

430-4593-C specifications and overview.

Summary

430-4593 Dell Compatible Transceiver QSFP+ 40GBase-SR4 (850nm, MMF, 150m, MTP/MPO, DOM)

Description

430-4593 Dell Compatible Transceiver QSFP+ 40GBase-SR4 (850nm, MMF, 150m, MTP/MPO, DOM)

Source title 430-4593-C Datasheet(PDF) - ATGBICS by Approved Technology

Related Parts

More parts from the same family.

Browse manufacturer