PE4240 PEREGRINE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 8

Technical content

Features

  • 75-ohm switch
  • Non-reflective at RF1, open reflective at RF2 when OFF
  • Integrated 0.25 watt terminations
  • CTB performance of 100dBc
  • High isolation: 85 dB at 5 MHz, 47 dB at 1 GHz
  • Low insertion loss: 0.5 dB at 5 MHz, 0.75 dB at 1 GHz
  • High input IP2: >80 dBm
  • CMOS/TTL single-pin control
  • Single +3 volt supply operation Notes: 1. Device linearity will begin to degrade below 1 MHz. 2. Measured in a 50 Ω system. 3. Measured with a 1 ns risetime, 0/3 V pulse and 500 MHz bandwidth. 4. Note Absolute Maximum ratings in Table 3.

Table 1. Electrical Specifications @ +25 °C (ZS = ZL = 75 Ω) Figure 2. Package Type

1000 MHz

©2006 Peregrine Semiconductor Corp. All rights reserved. Figure 13. Package Drawing 3 COPLANARITY APPLIES TO EXPOSED HEAT SLUG AS WELL AS THE TERMINALS. 4 PROFILE TOLERANCE APPLIES TO PLASTIC BODY ONLY.

  1. DIMENSIONS AND TOLERANCES ARE PER ANSi Y14.5
  2. DIMENSIONS ARE IN MILLIMETERS, ANGLES ARE IN DEGREES.

©2006 Peregrine Semiconductor Corp. All rights reserved. Document No. 70-0067-03 │www.psemi.com Table 6. Dimensions Table 7. Ordering Information

Description

3000 units / T&R 4240-00 PE4240-EK PE4240-06DFN 3x3mm-EK Evaluation Kit 1 / Box Figure 14. Tape and Reel Specifications

©2006 Peregrine Semiconductor Corp. All rights reserved. Document No. 70-0067-03 │ UltraCMOS™ RFIC Solutions Sales Offices The Americas Peregrine Semiconductor Corporation

9450 Carroll Park Drive

San Diego, CA 92121 Tel 858-731-9400 Fax 858-731-9499 North Asia Pacific Peregrine Semiconductor K.K. 5A-5, 5F Imperial Tower 1-1-1 Uchisaiwaicho, Chiyoda-ku Tokyo 100-0011 Japan Tel: +81-3-3502-5211 Fax: +81-3-3502-5213 Peregrine Semiconductor, Korea #B-2402, Kolon Tripolis, #210 Geumgok-dong, Bundang-gu, Seongnam-si Gyeonggi-do, 463-480 S. Korea Tel: +82-31-728-4300 Fax: +82-31-728-4305 Europe Peregrine Semiconductor Europe Bâtiment Maine 13-15 rue des Quatre Vents F-92380 Garches, France For a list of representatives in your area, please refer to our Web site at: www.psemi.com Data Sheet Identification Advance Information The product is in a formative or design stage. The data sheet contains design target specifications for product development. Specifications and features may change in any manner without notice. Preliminary Specification The data sheet contains preliminary data. Additional data may be added at a later date. Peregrine reserves the right to change specifications at any time without notice in order to supply the best possible product. Product Specification The data sheet contains final data. In the event Peregrine decides to change the specifications, Peregrine will notify customers of the intended changes by issuing a DCN (Document Change Notice). The information in this data sheet is believed to be reliable. However, Peregrine assumes no liability for the use of this information. Use shall be entirely at the user’s own risk. No patent rights or licenses to any circuits described in this data sheet are implied or granted to any third party. Peregrine’s products are not designed or intended for use in devices or systems intended for surgical implant, or in other applications intended to support or sustain life, or in any application in which the failure of the Peregrine product could create a situation in which personal injury or death might occur. Peregrine assumes no liability for damages, including consequential or incidental damages, arising out of the use of its products in such applications. The Peregrine name, logo, and UTSi are registered trademarks and UltraCMOS and HaRP are trademarks of Peregrine Semiconductor Corp. South Asia Pacific Peregrine Semiconductor, China Shanghai, 200040, P.R. China Tel: +86-21-5836-8276 Fax: +86-21-5836-7652 Space and Defense Products Americas: Tel: 505-881-0438 Fax: 505-881-0443 Europe, Asia Pacific:

180 Rue Jean de Guiramand

13852 Aix-En-Provence cedex 3, France

Tel: +33(0) 4 4239 3361 Fax: +33(0) 4 4239 7227