PE4231 PEREGRINE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 7
Technical content
Features
- Optimized for 75 Ω systems
- Single +3-volt power supply
- Low insertion loss: 0.80 dB at 1.0 GHz
- High isolation: 42 dB at 1.0 GHz
- Typical input 1 dB compression point of +32 dBm
- Single-pin CMOS or TTL logic control
- Low cost Notes: 1. Device linearity will begin to degrade below 1 MHz. 2. Measured with a 1 ns risetime, 0/3 V pulse and 500 MHz bandwidth. 3. Measured in a 50 Ω system.
Figure 2. Package Type Table 1. Electrical Specifications @ +25 °C, VDD = 3 V (ZS = ZL = 75 Ω )
50 MHz
1000 MHz
1000 MHz, 17 dBm
©2005 Peregrine Semiconductor Corp. All rights reserved. Document No. 70-0097-01 │ UltraCMOS™ RFIC Solutions Table 2. Pin Descriptions Table 3. Absolute Maximum Ratings exceeding the rating specified in Table 3. devices are immune to latch-up. Table 4. DC Electrical Specifications series capacitor or held at 0 VDC. Figure 3. Pin Configuration (Top View)
Description
Nominal +3 V supply connection. CTRL CMOS or TTL logic level: High = RFCommon to RF1 signal path Low = RFCommon to RF2 signal path GND Ground connection. Traces should be physically short and connected to ground RF Common Common RF port for switch.1 RF2 RF2 port.1 GND Ground Connection. Traces should be physically short and connected to ground GND Ground Connection. Traces should be physically short and connected to ground RF1 RF1 port.1 Symbol Parameter/ Conditions Min Max Units VDD Power supply voltage -0.3 4.0 V VI Voltage on any input ex- cept for the CTRL input -0.3 VDD+ 0.3 V VCTRL Voltage on CTRL input 5.0 V TST Storage temperature range -65 150 TOP Operating temperature range -40 PIN Input power (50Ω) dBm VESD ESD voltage (Human Body Model) 200 V Parameter Min Typ Max Units VDD Power Supply Voltage 2.7 3.0 3.3 V IDD Power Supply Current (VDD = 3V, VCNTL = 3V) µA Control Voltage High 0.7xVDD V Control Voltage Low 0.3xVDD V Table 5. Truth Table
©2005 Peregrine Semiconductor Corp. All rights reserved. Document No. 70-0097-01 │ UltraCMOS™ RFIC Solutions 8-lead MSOP Table 6. Ordering Information Figure 14. Package Drawing
1.10 MAX
0.95 BSC
2000 units / T&R 4231-00 PE4231-EK PE4231-08MSOP-EK Evaluation Kit 1 / Box 4231-51 4231 PE4231G-08MSOP-50A Green 8-lead MSOP 50 units / Tube 4231-52 4231 PE4231G-08MSOP-2000C Green 8-lead MSOP 2000 units / T&R
©2005 Peregrine Semiconductor Corp. All rights reserved. Document No. 70-0097-01 │www.psemi.com Sales Offices United States Peregrine Semiconductor Corp.
9450 Carroll Park Drive
San Diego, CA 92121 Tel 1-858-731-9400 Fax 1-858-731-9499 Japan Peregrine Semiconductor K.K. 5A-5, 5F Imperial Tower 1-1-1 Uchisaiwaicho, Chiyoda-ku Tokyo 100-0011 Japan Tel: 011-81-3-3502-5211 Fax: 011-81-3-3502-5213 Europe For a list of representatives in your area, please refer to our Web site at: www.psemi.com Data Sheet Identification Advance Information The product is in a formative or design stage. The data sheet contains design target specifications for product development. Specifications and features may change in any manner without notice. Preliminary Specification The data sheet contains preliminary data. Additional data may be added at a later date. Peregrine reserves the right to change specifications at any time without notice in order to supply the best possible product. Product Specification The data sheet contains final data. In the event Peregrine decides to change the specifications, Peregrine will notify customers of the intended changes by issuing a DCN (Document Change Notice). Peregrine Semiconductor Europe Bâtiment Maine 13-15 rue des Quatre Vents F- 92380 Garches, France China Peregrine Semiconductor 28G, Times Square, No. 500 Zhangyang Road, Shanghai, 200122, P.R. China Tel: 011-86-21-5836-8276 Fax: 011-86-21-5836-7652 The information in this data sheet is believed to be reliable. However, Peregrine assumes no liability for the use of this information. Use shall be entirely at the user’s own risk. No patent rights or licenses to any circuits described in this data sheet are implied or granted to any third party. Peregrine’s products are not designed or intended for use in devices or systems intended for surgical implant, or in other applications intended to support or sustain life, or in any application in which the failure of the Peregrine product could create a situation in which personal injury or death might occur. Peregrine assumes no liability for damages, including consequential or incidental damages, arising out of the use of its products in such applications. The Peregrine name, logo, and UTSi are registered trademarks and UltraCMOS is a trademark of Peregrine Semiconductor Corp.