PE4135 PEREGRINE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 9

Technical content

Features

  • Integrated, single-ended RF & LO interfaces
  • High linearity: Typical IIP3 at 32dBm 820 - 920 MHz (+17 dBm LO)
  • Low conversion loss: 6.8 dB (+17 dBm LO)
  • High isolation: Typical LO-IF at 42 dB, LO-RF at 32 dB
  • Small 6-lead 3x3 mm DFN package

Figure 2. Package Type Table 1. Electrical Specifications @ +25 °C

  1. Test conditions unless otherwise noted: IF = 70 MHz, LO input drive = 17 dBm, RF input drive = 3 dBm.
  2. An IF frequency of 70 MHz is a nominal frequency. The IF frequency can be specified by the user as long as the RF and LO

frequencies are within the specified maximum and minimum.

  1. Conversion Loss includes loss of IF transformer (M/A COM ETC1-1-13, nominal loss 0.7 dB at 70 MHz).

©2005 Peregrine Semiconductor Corp. All rights reserved. Product Specification PE4135 Page 2 of 9 Document No. 70-0086-04 │www.psemi.com Table 2. Pin Descriptions Table 3. Absolute Maximum Ratings exceeding the rating specified in Table 3. devices are immune to latch-up. Figure 3. Pin Configuration (Top View) may cause permanent device damage. limits in the DC Electrical Specifications table. extended periods may affect device reliability.

Description

IF differential output. GND Ground connections for Mixer. Traces should be physically short and connect immediately to ground plane for best performance. The exposed solder pad must also be soldered to the ground plane for best performance. LO LO Input. RF RF Input. GND Ground connections for Mixer. Traces should be physically short and connect immediately to ground plane for best performance. The exposed solder pad must also be soldered to the ground plane for best performance. IF2 IF differential output. Symbol Parameter/Conditions Min Max Units TST Storage temperature range -65 150 TOP Operating temperature range -40 PLO LO input power dBm PRF RF input power dBm VESD ESD Sensitive Device 250 V

©2005 Peregrine Semiconductor Corp. All rights reserved. Figure 17. Package Drawing 3 COPLANARITY APPLIES TO EXPOSED HEAT SLUG AS WELL AS THE TERMINALS. 4 PROFILE TOLERANCE APPLIES TO PLASTIC BODY ONLY.

  1. DIMENSIONS AND TOLERANCES ARE PER ANSi Y14.5
  2. DIMENSIONS ARE IN MILLIMETERS, ANGLES ARE IN DEGREES.

©2005 Peregrine Semiconductor Corp. All rights reserved. Document No. 70-0086-04 │ UltraCMOS™ RFIC Solutions Table 8. Ordering Information 3000 units / T&R 4135-00 PE4135-EK PE4135-06DFN 3x3mm-EK Evaluation Kit 1 / Box 4135-51 4135 PE4135G-06DFN 3x3mm-12800F Green 6-lead 3x3 mm DFN 12800 units / Canister 4135-52 4135 PE4135G-06DFN 3x3mm-3000C Green 6-lead 3x3 mm DFN 3000 units / T&R 6-lead DFN Note: R7 = 7 inch Lock Reel, R13 = 13 inch Lock Reel Table 7. Dimensions Figure 18. Tape and Reel Specifications

©2005 Peregrine Semiconductor Corp. All rights reserved. Product Specification PE4135 Page 9 of 9 Document No. 70-0086-04 │www.psemi.com Sales Offices The Americas Peregrine Semiconductor Corp.

9450 Carroll Park Drive

San Diego, CA 92121 Tel 858-731-9400 Fax 858-731-9499 North Asia Pacific Peregrine Semiconductor K.K. 5A-5, 5F Imperial Tower 1-1-1 Uchisaiwaicho, Chiyoda-ku Tokyo 100-0011 Japan Tel: +81-3-3502-5211 Fax: +81-3-3502-5213 Europe Peregrine Semiconductor Europe Commercial Products: Bâtiment Maine 13-15 rue des Quatre Vents F- 92380 Garches, France Space and Defense Products:

180 Rue Jean de Guiramand

13852 Aix-En-Provence cedex 3, France

Tel: +33(0) 4 4239 3361 Fax: +33(0) 4 4239 7227 For a list of representatives in your area, please refer to our Web site at: www.psemi.com Data Sheet Identification Advance Information The product is in a formative or design stage. The data sheet contains design target specifications for product development. Specifications and features may change in any manner without notice. Preliminary Specification The data sheet contains preliminary data. Additional data may be added at a later date. Peregrine reserves the right to change specifications at any time without notice in order to supply the best possible product. Product Specification The data sheet contains final data. In the event Peregrine decides to change the specifications, Peregrine will notify customers of the intended changes by issuing a DCN (Document Change Notice). The information in this data sheet is believed to be reliable. However, Peregrine assumes no liability for the use of this information. Use shall be entirely at the user’s own risk. No patent rights or licenses to any circuits described in this data sheet are implied or granted to any third party. Peregrine’s products are not designed or intended for use in devices or systems intended for surgical implant, or in other applications intended to support or sustain life, or in any application in which the failure of the Peregrine product could create a situation in which personal injury or death might occur. Peregrine assumes no liability for damages, including consequential or incidental damages, arising out of the use of its products in such applications. The Peregrine name, logo, and UTSi are registered trademarks and UltraCMOS is a trademark of Peregrine Semiconductor Corp. South Asia Pacific Peregrine Semiconductor 28G, Times Square, No. 500 Zhangyang Road, Shanghai, 200122, P.R. China Tel: +86-21-5836-8276 Fax: +86-21-5836-7652