40W-DBFE LINKCOM | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 5
Technical content
- EMI: Meets CE / Meets FCC
- Surge: Line to Line 2 kV; Line to FG 4kV
- Comply with Indoor/Outdoor Waterproof (IP 67)
- Warranty: 5 years (refer to LinkCom warranty policy)
- RoHS Compliant
- Safety: Meets UL
0.7 A / 100 Vac
Range: 47-63 Hz, Normal: 50-60 Hz 90-305 Vac, 127-431 Vdc, Normal: 100-277 Vac DC OUTPUT POWER(W) ±5% 84% 2.5 ±5% 3000 ms at Full Load 115 Vac / 230 VacTURN ON DELAY TIME 0-10V Dimmable Constant Current Mode45-DBFE Series 14-24 14-24 FEATURES: ACTIVE POWER FACTOR LEAKAGE CURRENT THD COLD START 43 A @ 230 Vac 0.75 mA / 264 Vac INRUSH CURRENT (typ) > 0.95 @ 115 Vac / > 0.9 @ 277 Vac EFFICIENCY 1.9 DC OUTPUT VOLTAGE(V) 1.75 OUTPUT CURRENT(A) OUTPUT CURRENT TOLERANCE 84% OVER CURRENT PROTECTION INPUT FREQUENCY AC CURRENT SHORT CIRCUIT PROTECTION < 20% O/P NOISE(P-P,V) 45.6 SCP will restart automatically after the fault condition is removed OVP will restart automatically after the fault condition is removed OTP will restart automatically after the fault condition is removedOVER TEMP. PROTECTION OVER VOLTAGE PROTECTION ISOLATION RESISTANCE Meets FCC Part15 / Meets EN55015 I/P-O/P: 4.242 kVdc , I/P-FG: 2.5 kVdc, I/P-CASE: 2.5 kVdc -20℃ ~ +60 ℃ @ Full LoadOPERATING TEMP. RELATIVE HUMIDITY SAFETY -40℃ ~ +80℃ 10% to +90%, non-cond. WITHSTAND VOLTAGE (4) Specified for free-air convection cooling. (5) Minimum load is NOT required for proper operation . (6) 100% Production Tested. ＊Please contact sales@linkcom.com.tw, sales@linkcomusa.com for more information ＊REFERENCE: www.linkcom.com.tw
- AC Input 90~305 Vac Nominal PRODUCT SPECIFICATION 42DBFE-045U172-00 DBFE-045U192-00 MODEL (1) All parameters specified at 230 Vac input unless otherwise noted. (2) All specifications Typical at 25℃, unless otherwise noted, at normal line and load. (3)Ripple and Noise measured directly at pins/terminals at nom. load, pk-pk at 20MHz bandwidth. NA I/P-O/P: 100M Ω / 500 Vdc / 25℃ / 70% RH 163 * 47 * 31.6 mm 【6.42 * 1.85 * 1.24 inch】DIMENSION (L*W*H) EMI Meets UL 60950-1 STORAGE TEMP. INPUT VOLTAGE RANGE
- Protection: SCP / OVP / OTP
- High Operating Ambient Temp.: -20℃~+60℃
- Power Factor: > 0.95 @ 115 VAC / > 0.9 @ 277 VAC
- Surge Protection: L-N 1 kV, L/N-FG 2 kV ELECTRICAL SPECIFICATION
- T.H.D: <20% 2.5 Linkcom Manufacturing Co., Ltd.
Constant Current Mode45-DBFE Series ＊REFERENCE: www.linkcom.com.tw DIMENSIONS Tc Max. DBFE-045U192 as Tc Max. Linkcom Manufacturing Co., Ltd.
Constant Current Mode45-DBFE Series 2. When connected to different Dimmers, 0-10V dimmable version will have a ±10% output current tolerance. DIMMING OPERATION Maximum Source current on the 0-10V(+) Purple Wire Notes: 0.1mA ─ 1V ─Absolute maximum voltageon on the 0-10(+) Purple Wire Parameters Minimum Typical 3. Recommended dimmers are Leviton IP710,Lutron NTSTV-DV or equivalent. 4. When dimming wires +Purple/-Gray are left open, the output current will be at 100%. 1. 1. Purple and Gray wires on the output side are used for 0-10V dimming 1mA 10V 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 110% 0 1 2 3 4 5 6 7 8 9 10 Output Current (%) Dimming input(Vdc) Dimming Performance Vin=120 Vin=277 PDBFE0045■XXX-00G V (Leviton) IP710 Dimmer (Lutron) NTSTV-DV Dimmer Gray(-) Red(+) Black(-) Purple(+) Linkcom Manufacturing Co., Ltd.
Constant Current Mode45-DBFE Series Power Factor vs. Load (DBFE-045U192-00) Efficiency vs. Load (DBFE-045U192-00) T.H.D vs. Load (DBFE-045U192-00) 0.85 0.90 0.95 1.00 Power Factor Load (%) PF vs Load Vin=100 Vin=120 Vin=200 Vin=230 Vin=277 70% 75% 80% 85% 90% Efficiency (%) Load (%) Efficiency vs Load Vin=100 Vin=120 Vin=200 Vin=230 Vin=277 10% 15% 20% THD (%) Load (%) THD vs Load Vin=100 Vin=120 Vin=200 Vin=230 Vin=277 Linkcom Manufacturing Co., Ltd.
Constant Current Mode45-DBFE Series Output Current VS Load (DBFE-045U192-00) 1.800 1.850 1.900 1.950 2.000 Output Current (A) Load (%) Output Current vs Load Vin=100 Vin=120 Vin=200 Vin=230 Vin=277 Linkcom Manufacturing Co., Ltd.