TB-4013 MENDA | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 3
Technical content
© 2025 DESCO INDUSTRIES INC Employee Owned MENDA - 3651 Walnut Avenue, Chino, CA 91710 • (909) 627-2453 • Website: MendaPump.com Blow Vac Operation and Maintenance
Description
The MENDA Blow Vac is a compact, dual function unit which is totally made up of ESD Safe housing parts and accessories. It is designed for precise removal and collection of dry dust particles and debris from equipment that is sensitive to electrostatic discharge (ESD). Dissipative thermoplastic rubber stretch hose with a steel conductive spring wire to remove electrostatic charges via the dissipative housing and ground wire plugged into a three-wire AC electrical outlet. The Blow Vac can also be converted in seconds into a powerful blower for dust removal in areas otherwise not accessible. You simply need to attach the optional two part blow assembly attachment, MENDA Part Number 35836. The Blow Vac has been specially made with a dissipative housing and attachments/accessories. All are groundable per S20.20 <1 x 109 Static Dissipative. The Blow Vac and its accessories are available as the following item numbers: Item Description
35840 Blow Vac, 120 VAC
35841 Blow Vac with Adjustable Airflow, 120 VAC
35843 Blow Vac with Adjustable Airflow, 230 VAC
35834 Replacement Hose
35835 Mini Attachment Set
35836 Two-Part Blow Assembly
35837 Replacement HEPA Filter
35838 Replacement Filter
35839 Replacement Filter Bag, 10 Pack
1 Dissipative stretch hose – Extends over 4'
1 Soft Dissipative Rubber Nozzle
1 Hard Dissipative Crevice Nozzle
1 Low Charging Carrying Strap
1 Power Cord, North America (8') (35840 & 35841 only)
- Slide one end of the dissipative stretch hose into suction opening Airflow inlet (vacuum) or Airflow Outlet (blower). 2. Press the desired nozzle onto the hose end. 3. Install any of the other appropriate attachments to the other end of the hose. The Two Part Blow Assembly attachment (35836) is recommended for use if the Blow Vac will be used to blow debris. 4. Place the rocker switch in off position. For the adjustable airflow unit further place the knob electronic control onto the Medium power setting. 5. Plug appliance coupling end of the power cord into rear power inlet Blow Vac. Plug the 3-pin/blade power plug into an electrical outlet that is properly grounded in accordance with all local codes and ordinances. Start Blow Vac by pressing the power switch to “ON” position. TECHNICAL BULLETIN TB-4013
Figure 1. MENDA 35840 and 35841 Blow Vac Figure 2. Connecting the hose to the airflow outlet
© 2025 DESCO INDUSTRIES INC Employee Owned MENDA - 3651 Walnut Avenue, Chino, CA 91710 • (909) 627-2453 • Website: MendaPump.com Specifications Construction Durable and highly solvent resistant volume dissipative polypropylene housing Motor 1.15 hp Energy Consumption 880 W max Suction 80 W.G. (measured at orifice motor) Sound Level 72 dB @ 1 m Weight 4.8 lbs. Dimensions 12.5" x 5" x 7.5" Speed Simple bleeding valve (35840) Stepless electronic regulator (35841, 35842) Filter Bag Advanced 5-Stage Filter System Replace filter bag approximately 5 times before having to change micromotorfilter HEPA (pre-moto) micromotorfilter
1.2 L multilayer filter bag
Hose Dissipative thermoplastic rubber stretch hose Nozzle Dissipative soft rubber snorkel nozzle Tools Dissipative hard crevice tool Accessories Low charging leather shoulder strap Certifications CE Country of Origin Netherlands Limited Warranty, Warranty Exclusions, Limit of Liability and RMA Request Instructions See the MENDA Warranty - MendaPump.com/Limited-Warranty.aspx