36190 MENDA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 1

Technical content

© 2023 DESCO INDUSTRIES INC Employee Owned 3651 WALNUT AVE., CHINO, CA 91710 PHONE: (909) 627-2453 WEBSITE: MENDATools.com DRAWING NUMBER 36190 DATE: February 2023 CONDUCTIVE ROUND BRUSH, PLASTIC HANDLE, FIRM BRISTLES, 1/8 IN Characteristics:

  • ESD Brushes are ideal for removing dust, dirt and left over materials from printed circuit boards (PCB) and other static sensitive components
  • Brushes minimize static charge generation and remove electrostatic charges to ground when held by grounded personnel
  • RTT Resistance: 1 x 103 to <1 x 105 ohms tested per modified ANSI/ESD S4.1
  • Conductive bristles made of firm black carbon nylon
  • Conductive carbon loaded polypropylene handle
  • Conductive handle’s ESD properties are not affected by humidty as are wooden handle brushes Specifications and procedures subject to change without notice. Unless otherwise noted, tolerance is ±10%. 1/8" 4-11/16" Item Handle Type Bristle Hardness Overall Length Overall Width Bristle Length Bristle Width Bristle Height

36190 Round Firm 4-11/16" (120 mm) 1/8" (3 mm) 1/2" (13 mm) 5/16" (8 mm) 5/16" (8 mm)

Designed to fulfill ANSI/ESD S20.20 requirement to ground all conductors at ESD workstation. ESD Handbook TR20.20 Table 1 lists under Typical Static Electricity Sources “Brushes (camel/pig hair and synthetic bristles).” “It should be understood that any object, item, material or person could be a source of static electricity in the work environment. Removal of unnecessary nonconductors, replacing nonconductive materials with dissipative or conductive materials and grounding all conductors are the principle methods of controlling static electricity in the workplace, regardless of the activity.” (TR 20.20 section 2.4)