35600 MENDA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 1

Technical content

© 2016 DESCO INDUSTRIES INC. Employee Owned DRAWING NUMBER 35600 DATE: April 2016 LASTING-TOUCH, PUMP ONLY Lasting-Touch Pump:

  • One touch operation frees operator’s hands for use
  • Spill resistant design and swing-lid reduces fumes and waste
  • Recommended for one-handed dispensing of liquids, solvents, and chemicals
  • Durable, light-weight construction
  • Compatible with any 45-400 threaded neck container
  • Dispenses approximately 0.1cc of liquid with each pump Pump Material Polypropylene Spring Material Stainless-Steel Locks for Travel No Neck Size / Thread 45/400 Lid-Type Swing-lid Specifications and procedures subject to change without notice. Unless otherwise noted, tolerance is ±10%. 3651 WALNUT AVE., CHINO, CA 91710 PHONE: (909) 627-2453 WEBSITE: MendaPump.com Made in the United States of America (28 mm) (51 mm) (102 mm) Pump Care: Some types of fluids may leave a residue in the mechanism of the dispenser. Over time, this can reduce the performance of the pump. Occasional cleaning is recommended to maintain your unit to original efficiency. Clean by flushing the mechanism thoroughly with warm soapy water. Flush the mechanism again with clean water to remove any soap residue. Do not boil or steam the dispenser. For long periods of inactivity, pumps should be flushed free of liquid and stored inverted in a dry place. Limited Warranty, Warranty Exclusions, Limit of Liability and RMA Request Instructions: Before using, users shall determine the suitability of the product for their intended use, and users assume all risk and liability whatsoever in connection therewith. See the Menda Terms and Conditions - Mendapump.com/TermsAndConditions.aspx