35045 MENDA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 1

Technical content

  • Vinyl Badge Holder ◦ Material Thickness: 0.020" (0.51mm) (3S) front, & 0.020" (0.51mm) (6S) back ◦ Material Tolerance (thickness): ±10% ◦ Material Color: clear front & matte back
  • Includes a 1/8" (3mm) x 9/16" (14mm) punch through slot, and two 3/16" (5mm) diameter hang holes located 3/8" (10mm) from the top
  • 4 1/4" (108mm) x 3 7/16" (87mm) (Outer Dimension)
  • Opening located 1 1/8" (29mm) from top, with flap closure
  • Embossed with Menda & Made In America along the top header HORIZONTAL BADGE HOLDER WITH FLAP CLOSURE, 3 7/8" (98MM) x 2 5/8" (67MM) INSERT SIZE © 2024 DESCO INDUSTRIES INC. Employee Owned MADE IN AMERICA ± 1/16" tolerances on dimensions unless specified Specifications and procedures are subject to change without notice MENDA Made In Americ a 4 1/4" (108mm) OPENING 3 7/16" (87mm) 1 1/8" (29mm)

3651 WALNUT AVENUE, CHINO, CA 91710

PHONE: (909) 627-2453 FAX: (951) 755-8848 WEBSITE: Menda-ID.com DRAWING NUMBER 35045 DATE October 2024 CARD INSERT 3 7/8" (98mm) 2 5/8" (67mm) WARNING: This product can expose you to chemicals including DINP, which is known to the State of California to cause cancer. For more information go to http://www.p65warnings.ca.gov/