35006 MENDA | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 1
Technical content
FEATURES
- Designed to shield RFID signals to protect against unauthorized contactless access to information stored on a PIV card
- Designed to protect two smart cards against information and identify theft. No need to remove the card from the holder. Smart Cards slide in and the user swivels the card slightly to the left or right to transmit the card's encoded data.
- Designed to provide a barrier to invasive or unwanted communications with the card and puts the user in control of where and when the card is read.
- Meets FIPS 201 SLV.1 Test Requirements
- Made of durable, lightweight vinyl SPECIFICATIONS
- Shielded Dual Badge Holder ◦ Material Thickness: .014" Center & .012" (3H) badge holders ◦ Material Tolerance (thickness): +/- 10% ◦ Material Color: Black Suede center, clear pockets
- Includes a 1/8" x 9/16" punch through slot, and two 3/16" diameter hang holes located along the top
- Includes a clear vinyl pocket to secure the badge holders when card is not being scanned
- Includes a 1/4" grommet to allow for badge holders to swivel out for scanning
- 2 3/4" x 5" (Outer Dimensions)
- 2 1/4" x 3 1/2" (Insert Size) Badge Holders, 2 1/2" x 4 1/4" (OD)
- Embossed with ShieldID & Made In America along header
- Customs available
- Made in America
3651 WALNUT AVENUE, CHINO, CA 91710
PHONE: (909) 627-2453 FAX: (951) 755-8848 WEBSITE: Menda-ID.com DRAWING NUMBER 35006 DATE February 2011 © 2011 DESCO INDUSTRIES INC. Employee Owned MADE IN AMERICA SHIELD ID, DUAL CARDS, 2 1/4" x 3 1/2" INSERT SIZE 2 3/4" OPENING POCKET FRONT BACK OPENING POCKET Specifications and procedures subject to change without notice Dimensional tolerances are +/- 1/16" unless specified