3334 ASM-SENSOR | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 8

Technical content

Power Measuring Instruments AC/DC POWER HiTESTER 3334 Ideal for Meeting Energy Effi ciency Standards 3333 3334 By Popular Demand High Accuracy & Cost Performance All in One Device Choose the 3334 for DC and Current/Power Integration Applications Exceeds the 0.5% accuracy benchmark stipulated by international standards. ■ Extended Period of Guaranteed Accuracy of 3 Years Calibration expenses are reduced by a calibration interval six times that of our former models. ■ Maximum Cost Performance All the necessary functions and accuracy requirements are provided in an easy-to-use, no-frills device. Exceeds the 0.5% accuracy benchmark stipulated by international standards. ■ Extended Period of Guaranteed Accuracy of 3 Years Calibration expenses are reduced by a calibration interval six times that of our former models. ■ Maximum Cost Performance All the necessary functions and accuracy requirements are provided in an easy-to-use, no-frills device.

1.00mA 0.150V 0.0000W All Measurements Within this Range Fully Guaranteed for Accuracy 30.00A 300.0V 9.000kWCurrent: 1mA to 30A, Voltage: 0.15V to 300V, Apparent Power: 0W to 9kW

3334 AC/DC POWER

All the Features for DC and Current/Power Integration Measurements The HIOKI AC/DC POWER HiTESTER Solves All of your Energy Consumption Testing Needs All the Features for DC and Current/Power Integration Measurements ■ Complete Accuracy Over a Wide Input Range With a DC to 5kHz frequency bandwidth, all AC and DC measurement and AC/DC elements such as half-wave rectified values can be tested reliably and accurately [AC+DC Mode ]: For half-wave rectified loads common in small household appliances such as hair dryers [DC Mode]: For pure DC loads in batteries [AC Mode]: For loads in commercial power lines powering common household appliances Switch modes simply by pressing the DC/AC button on the panel ■ Measure AC or DC Loads 0.0 A Half-wave rectifi ed 0.0 A All waves rectifi ed Switch modes simply by pressing the DC/AC button on the panel Some hair dryers operate by switching the output by a half-wave rectifi ed. 80% of Actual Size Shown Both the 3333 and 3334 offer simple operating procedures and quick and easy-to-understand readings and alarm displays. Settings can be made for obtaining the average of captured data (A VG), VT ratio (conversion ratio), CT ratio, GP-IB address, integration time (from 1 minute to 10,000 hours), and D/A Output Parameters. Information regarding the Power HiTESTER's currents status such as display hold, remote control settings, and key lock (to prevent unauthorized reconfi gurations) can be viewed at a glance. *Easily test for over-consumption even when testing distorted waveforms that are commonly found in switching power supplies and similar devices by monitoring for the [PEAK OVER] alarm, simply by setting for the alarm to activate and the display to light up when the input exceeds the range. ■ Intuitive Setting Procedures and Easy-to-Understand Displays Measure for the Peak Value of Voltage and Current for Each Polarity Indepedently. Also measure the inrush current or surge current of electrical equipment. Measure simply by pressing the SHIFT+HOLD keys. Measure the peak current of the standby power of home entertainment devices Measure the inrush current when copiers and similar equipment are started peak current inrush current ■ Capture Inrush Current with the Peak Measurement Function

Compatible to 100 - 240V AC Power Supplies ■ Universal Power Supply The HIOKI AC/DC POWER HiTESTER Solves All of your Energy Consumption Testing Needs

  • Meet Industrial Standard Requirements for Test Accuracy
  • Measure for Consumed Power Also ideal for measuring the standby power and power consumption level of household appliances Make a secure connection with the screw-type terminals *Use a No.3 Phillips screwdriver Actual Size ■ Easy-to-connect Terminals ■ Data management with PC Ask your distributor for more information regarding the freeware for processing your measurement data Make full use of these interfaces to increase effi ciency
  • RS-232C (3334)
  • RS-232C, GP-IB (3334-01) Voltage Current Active power Integrated active power ■ Analog Output on All 4 Channels
  • Simultaneously ouput the voltage, current and active power values (DC ±2 V f.s., data refreshed 5 times/second)
  • Output the apparent power, power factor, or integrated current/active power over an additional 1 channel Even measure the discharge level of each individual polarity of batteries Devices that are highly vulnerable to power fl uctua- tions such as copiers and cycle-controlled equip- ment can also be measured for integrated power Measure the amount of solar gener- ated power and how much is being sold back to the power company Also ideal for measuring the standby power and power consumption level of household appliances ■ AC/DC Current and Power Integration Rear Panel Design of Model 3334-01 with built-in GP-IB Interface Reliably test waveforms with large crest factors (peak value with respect to the RMS value) such as pulsed systems *Highest effective peak voltage and peak current values on the 3334 are 300% of the range. Accuracy is guaranteed for 1% to 100% of both ranges. For example, in the 100mA range where the RMS value= 1mA Peak value= 300mA, CF=300 Even waveforms such as this can be measured accurately with the 3334. 1mA rms 300mA peak to peak Also ideal for measuring the standby power and power consumption level of household appliances ■ Accurate Even for Waveforms with Large Crest Factors Leading edge technology and innovations helped to minimize the space required, while still enabling DC measurements. *Standard rack mount kits also available upon special order. ■ Small Footprint 210 100 ■ Waveform Output over 3 Channels Instantaneous waveforms of the measured voltage, current a n d a c t i v e p o w e r c a n b e simultaneously output
  • Output: 1 V f.s.
  • Sampling speed: 74.4kHz (at 50Hz: 1488 points/waveform) (at 60Hz: 1240 points/waveform) Voltage Current Active power Waveform of a motor startup

Fully Answering the Needs for a High Accuracy, Long-lasting, and User- Friendly Power Measuring Device for the Production and Inspection Lines Actual Size 1. Key Lock (SHIFT + KEY LOCK keys) Useful for avoiding inadvertent operations on production lines. 2. Data Print (SHIFT + DATA OUT keys) Obtain hard copies of measurement data using the optional Printer Model 9442. ■ Convenient functions Select current range simply by pressing the button (accepts up to 30 AAC, including auto-ranging) No voltage range setting required (accepts up to

300 V AC)

■ Easy range setting Warning lights indicate out-of-range input to Model 3333 when measuring voltage and current of distorted waveforms, such as in power switching circuits. ■ Check for Errors at a Glance Bright emissive numeric and unit symbol display ■ Easy-to-see display Press the SET key to display settings Display a: A VG setting (number of samples to average) convenient for displaying severely fl uctuating values Display b: VT (voltage transformer) ratio setting Display c: CT (current transformer) ratio setting To expand the measurement input level, VT and CT ratios can be set for transformer measurements. Primary winding input values can be read directly. ■ Quick and Simple Settings Operation: Press NEXT or the a, b or c key to select a setting item Fully Answering the Needs for a High Accuracy, Long-lasting, and User-

3333 AC POWER

Accuracy That Can Only Be Realized with a Digital Display Display hold, remote control and key-lock states are indicated separately. ■ Clearly visible instrument status Selectable simultaneous display of voltage, current, power (active or apparent) or power factor Display a: voltage, current or active power Display b: current, active power or apparent power Display c: active power, power factor, voltage or current Operation: Press the a, b or c key to switch between parameters ■ Multifunctional - 3 Meters In One

Fully Answering the Needs for a High Accuracy, Long-lasting, and User- Friendly Power Measuring Device for the Production and Inspection Lines V oltage, current and active power measurements are simultaneously output as +2 VDC f.s. levels (refreshed about fi ve times per second). ■ Three-channel analog output Rear Panel Design of Model 3333-01 with built-in GP-IB Interface Model 3333 What are the advantages? Measurement accuracy: ±0.5% rdg. or better Model 3333 fully exceeds the accuracy level of traditional analog meters that has an accuracy of only ±0.5% f.s. Period of guaranteed accuracy (Recommended calibration interval): 3 years ±0.5% f.s is assured for a full three years, reducing calibration costs and production time losses Easy Operation Gone is the need to check for zero-position before measurement as you would on traditional analog meters Digital Display Quickly grasp the measurement data at a glance Data management on a PC Facilitate reporting and data recording needs using your computer Cost-Performance Take care of a multitude of measurement needs with a single low-cost instrument Use the optional Printer Model 9442 to print without concern for troublesome settings. ■ Connect to Printer Model 9442 Compatible to 100 - 240V AC Power Supplies ■ Universal Power Supply Screw-in terminal block affi xes wires securely. Because bad wiring connections can present a fi re hazard, the screw-type terminal block has been incorporated to ensure secure wiring. *Be sure to use a No. 3 Phillips screwdriver (available as an optional accessory) to loosen and secure the screws. ■ Easy-to-connect Terminals Actual Size ❍ RS-232C interface built-in ❍ Select Model 3333-01 for additional built-in GP-IB interface ■ PC measurement and data management Smaller installation space. The installed footprint of the POWER HiTESTER 3333 is about 34% smaller than that of former models. This size reduction makes the instrument especially easy to install. *Rack mounts for various installations also available on special order. Please inquire for details. 261 34 10015 210 7 261 30 10015 210 7 100 160 ■ Space-saving footprint

3334 (AC/DC) 3333 (AC)

  • General Specifications Measurable lines Single-phase, 2-wire (AC/DC) Single-phase, 2-wire (AC) Measurement parameters Voltage, current, active power, apparent power, power factor, frequency, integrated current and active power, waveform peak (voltage and current) Voltage, current, active power, apparent power, power factor Measurement method Simultaneous digital sampling of voltage and current, True RMS Sampling Frequency Approximately 74.4kHz Approximately 48kHz Measurement Range Switch between auto-range or manual Power 1.5000W to 9.000kW (refer to range composition table below)10.000W to 4.000kW (refer to range composition table below) Frequency bandwidth DC, 45Hz to 5kHz 45Hz to 5kHz
  • Accuracy Guaranteed at 23°C±5, max. 80%rh, sine wave input, power factor=1, in-phase voltage =0V (accuracy specifications differ depending on usage period of 1 or 3 years) Warm-up time 3 minutes 10 minutes Period of guaranteed accuracy 3 years (better accuracy specifications available for 1-year period) Effective measurement range Voltage, current:1% to 100% (Power: 0% to 100%) Voltage, current, power: 10% to 150% Effect of power factor (at pf=0.5) Maximum ±0.4%±rdg. (45 to 66Hz) Temperature Coeffi cient Maximum ±0.03%f.s./ºC ■ 3334 and 3333 Specifications *Add ±50µA to the accuracy when measuring DC current *Add (±50µA x voltage value) to the accuracy when measuring DC active power Frequency Guaranteed Period Voltage, current and active power (at less than 50% of input range) Current and active power (at 50% to 100% of input range) Notes d e f i n e d f o r c u r re n t i n p u t exceeding 20A
  • Measurement accuracy - Model 3334 Measurement Parameters Formula Apparent Power (S) S=U×I Power Factor (λ) λ=⎥P/S⎥ Integrated Current (Sum of I from start of integration) (1 hour of data) Integrated Active Power (Sum of P from start of integration) (1 hour of data) *U=T ested Voltage Value, I=T ested Current Value, P=T ested Active Power Value Calculating precision is ±1dgt. against the results obtained from each measured value Current and active power integration available only on Model 3334.
  • 3334 and 3333 Arithmetic Expressions
  • Measurement accuracy - Model 3333 Frequency Guaranteed Period Voltage, current and active power (input current 20 A or less) Current and active power (input current over 20 A) Notes d e f i n e d f o r c u r re n t i n p u t exceeding 20A Current Voltage 100.00mA (1.00 to 100.00mA) 300.0mA (3.0 to 300.0mA) 1.0000A (0.0100 to 1.0000A) 3.000A (0.030 to 3.000A) 10.000A (0.100 to 10.000A) 30.00A (0.30 to 30.00A) 15.000V (0.150 to 15.000V) 1.5000W (0.0000 to 1.5000W) 4.500W (0.000 to 4.500W) 15.000W (0.000 to 15.000W) 45.00W (0.00 to 45.00W) 150.00W (0.00 to 150.00W) 450.0W (0.0 to 450.0W) 30.00V (0.30 to 30.00V) 3.000W (0.000 to 3.000W) 9.000W (0.000 to 9.000W) 30.00W (0.00 to 30.00W) 90.00W (0.00 to 90.00W) 300.0W (0.0 to 300.0W) 900.0W (0.0 to 900.0W) 150.00V (1.50 to 150.00V) 15.000W (0.000 to 15.000W) 45.00W (0.00 to 45.00W) 150.00W (0.00 to 150.00W) 450.0W (0.0 to 450.0W) 1.5000kW (0.0000 to 1.5000kW) 4.500kW (0.000 to 4.500kW) 300.0V (3.0 to 300.0V) 30.00W (0.00 to 30.00W) 90.00W (0.00 to 90.00W) 300.0W (0.0 to 300.0W) 900.0W (0.0 to 900.0W) 3.000kW (0.000 to 3.000kW) 9.000kW (0.000 to 9.000kW)
  • Measurement ranges - Model 3334 Values in the ( ) represent the effective measurement range Measurements below 0.5% of the voltage or current range will be zero suppressed. Current Voltage 50.00mA (5.00 to 75.00mA) 200.0mA (20.0 to 300.0mA) 500.0mA (50.0 to 750.0mA) 2.000A (0.200 to 3.000A) 5.000A (0.500 to 7.500A) 20.00 A (2.00 to 30.00A) 200.0V (20.0 to 300.0V) 10.000W (1.000 to 15.000W) 40.00W (4.00 to 15.000W) 100.00W (10.00 to 15.00W) 400.0W (40.0 to 600.0W) 1.0000kW (0.1000 to 1.5000kW) 4.000kW (0.400 to 6.000kW)
  • Measurement ranges - Model 3333 Values in the ( ) represent the effective measurement range Measurements below 0.5% of the voltage, current , or power range will be zero suppressed. Values in the ( ) indicate accuracy when input exceeds 100% of range.

3334 (AC/DC) 3333 (AC)

  • Input Input impedance 2.4 MΩ for voltage, 10 mΩ or better (50/60 Hz) for current 2.4 MΩ for voltage, 7 mΩ or better (50/60 Hz) for current Maximum input voltage 300V, ±425Vpeak 300 Vrms, 425 Vpeak Maximum input current 30 A, ±42.5 Apeak 30 Arms, 42.5 Apeak Maximum effective peak voltage ±300% of each voltage range, Within ±425Vpeak Within 425Vpeak Maximum effective peak current ±300% of each current range, Within ±42.5Apeak ±300% of each current range, Within ±42.5Apeak Max. rated voltage to earth 300V (DC, 50/60Hz) 300V (50/60Hz)
  • Display Display indication range voltage and current: 0.5% to 105% of range active power: 0% to 110.25% of range voltage and current: 1% to 152% of range active power: 0% to 231.04% of range Displacement power factor 0.000 to 1.000 (no polarity display) Display refresh rate approx. 5 times per second Response time within 0.5 s (time to rated accuracy after abrupt change in input [0 to 90% or 100 to 10% of range])
  • Functions Integration measurement No.of displayed digits: Six digits Current Integration: form 0.00000mAh, Polarity-independent integration and Sum value Active power Integration: form 0.00000mWh, Polarity-independent integration and Sum value Integration time: 1 min to 10000 h Measurement accuracy: measurement accuracy of active power ±1dgt. Wave peak measurement Maximum value of positive and negative waveform of voltage/ current (up to 300% of full scale range) Rectification method Switchable between AC+DC(True RMS), DC(simple average display) and AC(True RMS) AC(True RMS) Analog output (D/A output) Parameter output representation: voltage, current and active power (3 simultaneous channels) D/A select an item from current integration, active power integration, apparent power, power factor Voltage output: 1 VDC f.s. for each range Output accuracy: ±0.5% f.s. + individual measurement accuracy Parameter output representation: voltage, current and active power (3 simultaneous channels) Voltage output: +2 VDC f.s. for each range Output accuracy: ±0.5% f.s. + individual measurement accuracy Waveform output Parameter output representation: voltage, current and active power (3 simultaneous channels) Voltage output: 1 VDC f.s. for each range Output accuracy: ±1.0% f.s. + individual measurement accuracy Average function Simple averaging of specified number of samples: 1, 2, 5, 10, 25, 50 or 100 VT or CT ratio VT ratios: 1, 2, 4, 10, 20, 30, 60, 100 75, 80,100,200,300,500,1000,2000,3000,5000, 10000 VT ratios: 1, 2, 4, 10, 20, 30, 60, 100 75,80,100 External Interfaces RS-232C interface: included as standard, Asynchronous communication method: full-duplex; Baud rate: 9600 bps (fixed) GP-IB interface: Model 3334-01 only IEEE-488.1 1987 compliant, IEEE-488.2 1987 reference GP-IB interface: Model 3333-01 only IEEE-488.1 1987 compliant, IEEE-488.2 1987 reference Miscellaneous Display Hold (HOLD), Maximum value hold, Peak value hold, Key Lock (KEYLOCK), Backup function (preserves settings, integration data) Display Hold (HOLD), Key Lock (KEYLOCK), Settings backup (preserves settings)
  • General Specifications Safety EN61010-1:2001 Pollution Factor 2, Measurement Category III (4000 V anticipated overvoltage) EMC EN61326, EN61000-3-2, EN61000-3-3 Operating environment 0 to 40 ºC, 80% RH or less, non-condensating Storage environment -10 to 50 ºC, 80% RH or less, non-condensating Rated supply voltage 100 to 240 VAC, 50/60 Hz Maximum rated power 20 VA Size and weigh 210W × 100H × 245D mm (excluding feet and projections), 2.5 kg 160W × 100H × 227D mm (excluding feet and projections), 1.9 kg

HEAD OFFICE :

81 Koizumi, Ueda, Nagano, 386-1192, Japan

TEL +81-268-28-0562 / FAX +81-268-28-0568 E-mail: os-com@hioki.co.jp HIOKI USA CORPORATION :

6 Corporate Drive, Cranbury, NJ 08512 USA

TEL +1-609-409-9109 / FAX +1-609-409-9108 E-mail: hioki@hiokiusa.com DISTRIBUTED BY All information correct as of Dec. 14, 2007. All specifi cations are subject to change without notice. 3334E1-7ZM-07P Printed in Japan HIOKI (Shanghai) Sales & Trading Co., Ltd. :

1904 Shanghai Times Square Offi ce, 93 Huai Hai Zhong Road

Shanghai, P.R.China POSTCODE: 200021 TEL +86-21-6391-0090/0092 FAX +86-21-6391-0360 E-mail: info-sh@hioki.cn Beijing Offi ce : A-2602 Freetown, 58 Dong San Huan Nan Road Beijing, P.R.China POSTCODE: 100022 TEL +86-10-5867-4080/4081 FAX +86-10-5867-4090 E-mail: info-bj@hioki.cn Guangzhou Offi ce : Room 303, Profi t Plaza, No.76, West Huangpu Road Guangzhou, P.R.China POSTCODE: 510623 TEL +86-20-38392673/2676 FAX +86-20-38392679 E-mail: info-gz@hioki.cn Data Management is as Easy as 1-2-3 ■ RS-232C (built-in with the 3334 and 3333) ■ RS-232C, GP-IB (built-in with the 3334-01 and 3333-01) Free RS-232C application for both models available from your authorized HIOKI distributor only. ■ Option Printer (For the 3333 and 3333-01) PRINTER 9442 CONNECTION CABLE (for printer 9442) 9444 RECORDING PAPER 1196 AC ADAPTER (for printer 9442 operation in Europe, except Switzerland) 9443-02 AC ADAPTER (for printer 9442, for USA) 9443-03 AC/DC POWER HiTESTER 3334 POWER HiTESTER (with GP-IB) 3334-01 (Accessories: Instruction Manual (1), Power cord (1)) POWER HiTESTER 3333 POWER HiTESTER (with GP-IB) 3333-01 (Accessories: Instruction Manual (1), Power cord (1)) ■ Options (Common to both Models 3334 and 3334-01) RS-232C CABLE (9-pin to 9-pin, crossed cable/1.8m(0.07ft)) 9637 RS-232C CABLE (9-pin to 25-pin, crossed cable/1.8m(0.07ft)) 9638 GP-IB CONNECTOR CABLE (2m) 9151-02 GP-IB CONNECTOR CABLE (4m) 9151-04 No. 3 Phillips screwdriver

  • Features and Functions 1. Operate the Power HiTESTER's keys on the PC as you would on the actual unit 2. Further process test data on spreadhseet software such as Excel ■ Operate the Power HiTESTER from Your PC 3334 3333 Use of the software require a comprehensive understanding of the protocols and commands. Support for modifi cations to the software not available. AC ADAPTER 9443-02 CONNECTION CABLE 9444 When purchasing the Printer 9442, make sure you also purchase the Connection cable 9444 and AC adapter 9443-02/03 so that you can connect it to the 3333/3333-01. Print method : Thermal serial dot printing Paper width : 112 mm(4.41ft) Power supply : 9443-02/03 AC adapter, or supplied nickel-metal hydride battery RS-232C CABLE 9637 GP-IB CONNECTOR CABLE 9151-02 No. 3 Phillips screwdriver