HMC332_06 HITTITE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 8

Technical content

Features

The HMC332 & HMC332E are single balanced mixer ICs with integrated LO amplifi ers. This converter IC can operate as an upconverter or downconverter between 2.0 GHz and 2.8 GHz. With the integrated LO amplifi er, the mixer requires an LO drive level of only 0 dBm, and requires only 6 mA from a single positive +3V rail. The mixer has 8 dB of conversion loss, an input P1dB of 0 dBm, and an input third order intercept point of +10 dBm. Integrated LO Amplifi er w/ Pdiss: < 20 mW Conversion Loss / Noise Figure: 8.0 dB Low LO Drive Level: 0 dBm Input IP3: +10 dBm Single Positive Supply: 3V to 5V Electrical Specifications, TA = +25° C Typical Applications The HMC332 / HMC332E is ideal for:

  • MMDS
  • PCMCIA
  • WirelessLAN
  • WCDMA micro-BTS Parameter IF = 100 MHz LO = 0 dBm & Vdd = +3V Units Min. Typ. Max. Frequency Range, RF & LO 2.0 - 2.8 GHz Frequency Range, IF DC - 1.0 GHz Conversion Loss 81 0 d B Noise Figure (SSB) 81 0 d B LO to RF Isolation 11 20 dB LO to IF Isolation 2 5 dB RF to IF Isolation 11 17 dB IP3 (Input) 41 0 d B m 1 dB Compression (Input) -4 0 dBm Supply Current (Idd) 6m A * Unless otherwise noted, all measurements performed as downconverter, IF= 100 MHz.

For price, delivery, and to place orders, please contact Hittite Microwave Corporation:

20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373

Order On-line at www.hittite.com Conversion Gain vs. Temperature @ LO = 0 dBm Isolation @ LO = 0 dBm IF Bandwidth @ LO = 0 dBmConversion Gain vs. Vdd @ LO = 0 dBm Return Loss @ LO = 0 dBmConversion Gain vs. LO Drive HMC332 / 332E GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 2.0 - 2.8 GHz v01.0705 -20 -15 -10 +25 C -40 C +85 C CONVERSION GAIN (dB) FREQUENCY (GHz) -20 -15 -10 +2.7V +3.0V +3.3V CONVERSION GAIN (dB) FREQUENCY (GHz) -20 -15 -10 CONVERSION GAIN RETURN LOSS RESPONSE (dB) FREQUENCY (GHz) -30 -25 -20 -15 -10 0 0.5 1 1.5 2 2.5 3 3.5 4 RF LO RETURN LOSS (dB) FREQUENCY (GHz) -20 -15 -10 -6 dBm -4 dBm -2 dBm 0 dBm +2 dBm +4 dBm CONVERSION GAIN (dB) FREQUENCY (GHz) -30 -25 -20 -15 -10 RF/IF LO/RF LO/IF ISOLATION (dB) FREQUENCY (GHz)

For price, delivery, and to place orders, please contact Hittite Microwave Corporation: Order On-line at www.hittite.com Upconverter Performance Conversion Gain @ LO = 0 dBm Input P1dB vs. Vdd @ LO = 0 dBmInput IP3 vs. Vdd @ LO = 0 dBm* Input IP3 vs. LO Drive* Input P1dB vs. Temperature @ LO = 0 dBm Input IP3 vs. Temperature @ LO = 0 dBm* * Two-tone input power= -10 dBm each tone, 1 MHz spacing. HMC332 / 332E GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 2.0 - 2.8 GHz v01.0705 -20 -15 -10 CONVERSION GAIN (dB) FREQUENCY (GHz) +2.7V +3.0V +3.3V INPUT IP3 (dBm) FREQUENCY (GHz) -10 +2.7V +3.0V +3.3V INPUT P1dB (dBm) FREQUENCY (GHz) +25 C -40 C +85 C INPUT IP3 (dBm) FREQUENCY (GHz) -2 dBm 0 dBm +2 dBm INPUT IP3 (dBm) FREQUENCY (GHz) -10 +25 C -40 C +85 C INPUT P1dB (dBm) FREQUENCY (GHz)

For price, delivery, and to place orders, please contact Hittite Microwave Corporation: Order On-line at www.hittite.com Harmonics of LOMxN Spurious @ IF Port nLO m R F 01234 0x x - 1 1 8 84 3 11 203 1 3 4 4 8 24 1 3 5 3 9 3 2 4 5 3> 7 4 6 4 > 7 4 5 06 7 4 >74 >74 >74 71 67 RF = 2.5 GHz @ -10 dBm LO = 2.4 GHz @ 0 dBm All values in dBc below IF power level. nLO Spur @ RF Port LO Freq. (GHz) 1 2 3 4 22 4 6 1 9 3 2 2.2 20 7 18 44 2.4 20 9 22 43 2.6 19 13 18 40 2.8 14 18 21 38 31 1 1 5 2 4 3 9 LO = 0 dBm All values in dBc below input LO level @ RF port. HMC332 / 332E GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 2.0 - 2.8 GHz v01.0705

For price, delivery, and to place orders, please contact Hittite Microwave Corporation: Order On-line at www.hittite.com HMC332 / 332E GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 2.0 - 2.8 GHz v01.0705 Absolute Maximum Ratings Outline Drawing RF / IF Input (Vdd = +3V) +13 dBm LO Drive (Vdd = +3V) +13 dBm Vdd 5.5V Continuous Pdiss (Ta = 85 °C) (derate 2.64 mW/°C above 85 °C) 238 mW IF DC Current ±3 mA Storage Temperature -65 to +150 °C Operating Temperature -40 to +85 °C ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS] 3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 5. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND. Part Number Package Body Material Lead Finish MSL Rating Package Marking [3] HMC332 Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 [1] H332 XXXX HMC332E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 [2] 332E XXXX [1] Max peak refl ow temperature of 235 °C [2] Max peak refl ow temperature of 260 °C [3] 4-Digit lot number XXXX

Package Information

For price, delivery, and to place orders, please contact Hittite Microwave Corporation: Order On-line at www.hittite.com HMC332 / 332E GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 2.0 - 2.8 GHz v01.0705 Pin Number Function Description Interface Schematic 1V d d Power supply for the LO Amplifi er. Two external RF bypass capacitors (10 pF & 10,000 pF) and an external inductor 4.7 nH) are required. 2, 5 GND Ground: Pin must connect to RF ground. 3I F This pin is DC coupled. For applications not requiring operation to DC, this port should be DC blocked externally using a series capacitor whose value have been chosen to pass the necessary IF frequency range. For operation to DC, this pin must not source/ sink more than 3mA of current or die non-function and possible die failure will result. 4R F This pin is AC coupled and matched to 50 Ohm from 2.0 - 2.8 GHz. 6L O This pin is AC coupled and matched to 50 Ohm from 2.0 - 2.8 GHz. Pin Descriptions

For price, delivery, and to place orders, please contact Hittite Microwave Corporation: Order On-line at www.hittite.com Application Circuit HMC332 / 332E GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 2.0 - 2.8 GHz v01.0705

For price, delivery, and to place orders, please contact Hittite Microwave Corporation: Order On-line at www.hittite.com Evaluation PCB The circuit board used in the fi nal application should use RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads should be connected directly to the ground plane similar to that shown. A suffi cient number of VIA holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. Item Description J1 - J4 PCB Mount SMA RF Connector C1 10 pF Capacitor, 0603 Pkg. C2 .01 μF Capacitor, 0603 Pkg. L1 4.7 nH Inductor, 0805 Pkg. U1 HMC332 / HMC332E Mixer PCB [2] 103927 Evaluation Board [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 List of Materials for Evaluation PCB 105099 [1] HMC332 / 332E GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 2.0 - 2.8 GHz v01.0705