307QS16GE

HMC307QS16G_06 HITTITE | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 6

Technical content

Features

Single Control Line Per Bit +/- 0.5 dB Typical Bit Error Miniature QSOP-16 Package: 29.4 mm Electrical Specifications, TA = +25° C, Vee = -5V & VCTL= 0/Vee Typical Applications The HMC307QS16G & HMC307QS16GE are broad- band 5-bit GaAs IC digital attenuators in 16 lead QSOP grounded base surface mount plastic pack- ages. Covering DC to 4 GHz, the insertion loss is less then 2 dB typical. The attenuator bit values are 1 (LSB), 2, 4, 8, and 16 dB for a total attenuation of 31 dB. Attenuation accuracy is excellent at ± 0.5 dB typical with an IIP3 of up to +44 dBm. Five bit control voltage inputs, toggled between 0 and -5V, are used to select each attenuation state at less than 50 uA each. A single Vee bias of -5V allows operation down to DC. This product is an excellent alternative to the HMC235QS16G. The HMC307QS16G / HMC307QS16GE is ideal for:

• Cellular
• PCS, ISM, MMDS
• Wireless Local Loop Parameter Frequency Min. Typical Max. Units Insertion Loss DC - 1.4 GHz 1.4 - 2.3 GHz 2.3 - 2.7 GHz 2.7 - 4.0 GHz 1.8 1.9 2.0 2.1 2.2 2.4 2.5 2.7 dB dB dB dB Attenuation Range DC - 4.0 GHz 31 dB Return Loss (RF1 & RF2, All Atten. States) DC - 1.4 GHz 1.4 - 2.3 GHz 2.3 - 2.7 GHz 2.7 - 4.0 GHz dB dB dB dB Attenuation Accuracy: (Referenced to Insertion Loss) 1 - 20 dB States 21 - 31 dB States 1 - 15 dB States 16 - 31 dB States DC - 2.7 GHz DC - 2.7 GHz 2.7 - 4.0 GHz 2.7 - 4.0 GHz ± 0.2 + 3% of Atten. Setting Max ± 0.3 + 5% of Atten. Setting Max ± 0.3 + 5% of Atten. Setting Max ± 0.6 + 10% of Atten. Setting Max dB dB dB dB Input Power for 0.1 dB Compression 0.5 - 4.0 GHz 24 dBm Input Third Order Intercept Point (Two-tone Input Power = 0 dBm Each Tone) 0.5 - 4.0 GHz 44 dBm Switching Characteristics tRISE, tFALL (10/90% RF) tON, tOFF (50% CTL to 10/90% RF) DC - 4.0 GHz 140 160 ns ns

For price, delivery, and to place orders, please contact Hittite Microwave Corporation:

20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373

Order On-line at www.hittite.com HMC307QS16G / 307QS16GE Return Loss RF1, RF2 (Only Major States are Shown) Absolute Bit Error vs. Attenuation State Insertion Loss Normalized Attenuation (Only Major States are Shown) Absolute Bit Error vs. Frequency (Only Major States are Shown) Relative Phase vs. Frequency (Only Major States are Shown) 1dB LSB GaAs MMIC 5-BIT DIGITAL ATTENUATOR, DC - 4 GHz v07.0505 -3.5 -2.5 -1.5 -0.5 0 0.5 1 1.5 2 2.5 3 3.5 4 +25 -40 +85 INSERTION LOSS (dB) FREQUENCY (GHz) -35 -30 -25 -20 -15 -10 0 0.5 1 1.5 2 2.5 3 3.5 4 1 dB 2 dB 4 dB 8 dB 16 dB 31 dB NORMALIZED ATTENUATION (dB) FREQUENCY (GHz) 0.5 1.5 1 4 7 1 01 31 61 92 22 52 83 1 BIT ERROR (dB) ATTENUATION STATE (dB)

1.9 GHz

2.4 GHz

0.9 GHz

0.1 GHz

3.5 GHz

-20 100 0 0.5 1 1.5 2 2.5 3 3.5 4 RELATIVE PHASE (deg.) FREQUENCY (GHz) 31 dB 8 dB 4 dB16 dB 1, 2 dB 0.5 1.5 0 0.5 1 1.5 2 2.5 3 3.5 4 BIT ERROR (dB) FREQUENCY (GHz) 16 dB 8 dB 31 dB 1, 2 & 4 dB -40 -35 -30 -25 -20 -15 -10 0 0.5 1 1.5 2 2.5 3 3.5 4 RETURN LOSS (dB) FREQUENCY (GHz) 16 dB8 dB 2, 4 dB 31 dB 1 dB

For price, delivery, and to place orders, please contact Hittite Microwave Corporation: Order On-line at www.hittite.com Application Circuit Truth TableControl Voltage D C B l o c k i n g C a p a c i t o r s C 1 & C 2 a r e required on RF1 & RF2. Choose C1 = C2 = 100 pF ~ 0.1 uF to allow lowest customer specific frequency to pass with minimal loss. R1= 5K Ohm is required to supply voltage to the circuit through either Pin 11 or Pin 14. Bias Voltage & Current Suggested Driver Circuit (One Circuit Required Per Bit Control Input) Simple driver using inexpensive standard logic ICs provides fast switching using minimum DC current. * Recommended value to suppress unwanted RF signals at V1 - V5 control lines. Control Voltage Input Attenuation State RF1 - RF2V1 16 dB 8 dB 4 dB 2 dB 1 dB Low Low Low Low Low Reference I.L. Low Low Low Low High 1 dB Low Low Low High Low 2 dB Low Low High Low Low 4 dB Low High Low Low Low 8 dB High Low Low Low Low 16 dB High High High High High 31 dB Max. Atten. Any combination of the above states will provide an attenuation approximately equal to the sum of the bits selected. State Bias Condition Low 0 to -3V @ 70 uA Typ. High Vee + 0.8V @ 5 uA Typ. Note: Vee = -5V ± 10% Vee Range = -5.0 Vdc ± 10% Vee (VDC) lee (Typ.) (mA) lee (Max.) (mA) -5.0 3 6 HMC307QS16G / 307QS16GE 1dB LSB GaAs MMIC 5-BIT DIGITAL ATTENUATOR, DC - 4 GHz v07.0505

For price, delivery, and to place orders, please contact Hittite Microwave Corporation: Order On-line at www.hittite.com Outline Drawing Absolute Maximum Ratings Control Voltage (V1 - V5) Vee - 0.5 Vdc Bias Voltage (Vee) -7.0 Vdc Storage Temperature -65 to +150 °C Operating Temperature -40 to +85 °C RF Input Power (0.5 - 4 GHz) +26 dBm ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Part Number Package Body Material Lead Finish MSL Rating Package Marking [3] HMC307QS16G Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 [1] HMC307 XXXX HMC307QS16GE RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 [2] HMC307 XXXX [1] Max peak refl ow temperature of 235 °C [2] Max peak refl ow temperature of 260 °C [3] 4-Digit lot number XXXX

Package Information

1dB LSB GaAs MMIC 5-BIT DIGITAL ATTENUATOR, DC - 4 GHz v07.0505 NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 5. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND.

For price, delivery, and to place orders, please contact Hittite Microwave Corporation: Order On-line at www.hittite.com Evaluation Circuit Board The circuit board used in the fi nal application should use RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A suffi cient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is avail- able from Hittite upon request. List of Materials for Evaluation PCB 103397 [1] * R2 - R6 = 100 Ohm. These resistors are optional and may be used to enhance d e c o u p l i n g o f t h e R F p a t h from the control inputs. Item Description J1 - J2 PCB Mount SMA Connector J3 - J9 DC Pin R1 5k Ohm Resistor, 0402 Pkg. R2 - R6 100 Ohm Resistor, 0402 Pkg. C1, C2 0402 Chip Capacitor, Select Value for Lowest Frequency of Operation U1 HMC307QS16G / HMC307QS16GE Digital Attenuator PCB [2] 103395 Evaluation PCB 1.5” x 1.5” [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 HMC307QS16G / 307QS16GE 1dB LSB GaAs MMIC 5-BIT DIGITAL ATTENUATOR, DC - 4 GHz v07.0505

For price, delivery, and to place orders, please contact Hittite Microwave Corporation: Order On-line at www.hittite.com Notes: HMC307QS16G / 307QS16GE 1dB LSB GaAs MMIC 5-BIT DIGITAL ATTENUATOR, DC - 4 GHz v07.0505