APD-240M021 VISHAY | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
Document Number: 37017 Revision 05-Dec-00 www.vishay.com APD-240M021 Vishay Dale Plasma Panel Display Modules
240 Character Display with Drive Electronics
Controller and Parallel Interface The APD-240M021 plasma display module consists of a multiplexed DC plasma display, drive circuitry and switching voltage converter mated with an intelligent, microprocessor-based controller board. The resulting assembly interfaces easily to micro- processor-based systems and requires only readily available low voltages for power. Vishay Dale’s patented open construction display technology assures a stable flicker free screen. Interfacing is a basic 8 bit parallel ASCII interface with some dedicated control lines and requires minimum handshaking. DEVICE SELECT (CS), ADDRESS (A 0), WRITE and READ lines are enabled in accordance with the Function Summary Chart and allow the host system to write or read data from the display. Data bus signals are formatted in accordance with the standard ASCII which allow control functions to be included in the character code matrix table. Functions such as advancing the cursor position or selecting the end-of-line mode are implemented with a single 8 bit control word.
FEATURES
- 240 (6 x 40) alphanumeric characters (5 x 7 dot matrix).
- Compatible with IEE 3402-08-240N.
- Only + 5 and + 11.5 to 30.0 VDC required.
- ASCII character set (optional character sets available).
- Efficient parallel interface.
- Wide viewing angle (150 °).
- Rugged design/slim profile.
- Flicker free refresh.
- Editing functions.
- High brightness. OPTICAL SPECIFICATIONS Number of Characters: 240. Luminance: 100 foot lamberts. DESCRIPTION PART NUMBER Non-Glare Filter (amber circular polarized) -
ORDERING INFORMATION
DIMENSIONS in inches [millimeters] Pin #1 Mates with Molex 09-50-3061 Pin #1 Mates with 3M 3399-6026 2.0 [50.80]4.75 [120.65] 0.450 [11.43] 0.470 [11.94] Max. 1.90 [48.26] Max. 1.15 [29.21] 0.250 [6.35]9.50 [241.3] 0.50 [12.70] 0.200 [5.08] 4.30 [109.22] 3.90 [99.06] 1.0 [25.40] 2.15 [54.61] 10.0 [254.0] 7.52 [191.0] STANDARD ELECTRICAL SPECIFICATIONS *At 12 volt input. MIN. TYP. MAX. UNITS Logic Supply Voltage + 4.75 + 5.0 + 5.25 V Logic Supply Current — 300.0 — mA Panel Supply Voltage 11.5 12.0 30.0 V Panel Supply Current* — 600.0 1000.0 mA Logic One Voltage 2.4 — — V Logic Zero Voltage — — 0.8 V Logic Zero Input Current — — - 0.4 mA
Document Number: 91000 www.vishay.com Revision: 18-Jul-08 1 Disclaimer Legal Disclaimer Notice Vishay All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all li ability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permit ted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purcha se, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medi cal, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners.