15KE36A-E354 VISHAY | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 7

Technical content

1.5KE6.8 thru 1.5KE540A, 1N6267 thru 1N6303 Vishay General Semiconductor Document Number: 88301 Revision: 22-Oct-08 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com , PDD-Asia@vishay.com , PDD-Europe@vishay.com www.vishay.com TRANSZORB® Transient Voltage Suppressors

FEATURES

 Glass passivated chip junction  Available in uni-directional and bi-directional  1500 W peak pulse power capability with a 10/1000 µs waveform, repetitive rate (duty cycle): 0.01 %  Excellent clamping capability  Very fast response time  Low incremental surge resistance  Solder dip 260 °C, 40 s  Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC TYPICAL APPLICATIONS Use in sensitive electronics protection against voltage transients induced by inductive load switching and lighting on ICs, MOSFET, signal lines of sensor units for consumer, computer, industrial, automotive and telecommunication. MECHANICAL DATA Case: Molded epoxy body over passivated junction Molding compound meets UL 94 V-0 flammability rating Base P/N-E3 - RoHS compliant, commercial grade Base P/NHE3 - RoHS co mpliant, high reliability/ automotive grade (AEC Q101 qualified) Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD22-B102 E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix meets JESD 201 class 2 whisker test Note:  1.5KE250 ~ 1.5KE540A and 1.5KE250C ~ 1.5KE440CA for commercial grade only Polarity: For uni-directional types the color band denotes cathode end, no marking on bi-directional types DEVICES FOR BI-DIRECTION APPLICATIONS For bi-directional types, use C or CA suffix (e.g. 1.5KE440CA). Electrical characteristics apply in both directions. PRIMARY CHARACTERISTICS VBR uni-directional 6.8 V to 540 V VBR bi-directional 6.8 V to 440 V PPPM 1500 W PD 6.5 W IFSM (uni-directional only) 200 A TJ max. 175 °C Case Style 1.5KE Notes: (1) Non-repetitive current pulse, per Fig. 3 and derated above TA = 25 °C per Fig. 2 (2) Measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum (3) VF = 3.5 V for 1.5KE220 (A) and below; VF = 5.0 V for 1.5KE250(A) and above MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL LIMIT UNIT Peak pulse power dissipation with a 10/1000 µs waveform (1) (Fig. 1) PPPM 1500 W Peak pulse current with a 10/1000 µs waveform (1) IPPM See next table A Power dissipation on infinite heatsink at TL = 75 °C (Fig. 5) P D 6.5 W Peak forward surge current 8.3 ms single half sine-wave uni-directional only (2) IFSM 200 A Maximum instantaneous forward voltage at 100 A for uni-directional only (3) VF 3.5/5.0 V Operating junction and storage temperature range T J, TSTG - 55 to + 175 °C

1.5KE6.8 thru 1.5KE540A, 1N6267 thru 1N6303 Vishay General Semiconductor www.vishay.com For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com , PDD-Asia@vishay.com , PDD-Europe@vishay.com Document Number: 88301 Revision: 22-Oct-082 ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) JEDEC TYPE NUMBER GENERAL SEMICONDUCTOR PART NUMBER BREAKDOWN VOLTAGE V BR AT IT (1) (V) TEST CURRENT IT (mA) STAND-OFF VOLTAGE VWM (V) MAXIMUM REVERSE LEAKAGE AT VWM ID (4) (µA) MAXIMUM PEAK PULSE CURRENT IPPM (2) (A) MAXIMUM CLAMPING VOLTAGE AT IPPM VC (V) MAXIMUM TEMP. COEFFICIENT OF VBR (%/°C) MIN. MAX.

1.5KE6.8 thru 1.5KE540A, 1N6267 thru 1N6303 Vishay General Semiconductor Document Number: 88301 Revision: 22-Oct-08 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com , PDD-Asia@vishay.com , PDD-Europe@vishay.com www.vishay.com Notes: (1) Pulse test: tp ≤ 50 ms (2) Surge current waveform per Fig. 3 and derate per Fig. 2 (3) All terms and symbols are consistent with ANSI/IEEE CA62.35 (4) For bi-directional types with V R 10 V and less the ID limit is doubled * Bi-directional versions are UL approv ed under component across the line protecti on, ULV1414 file number E108274 (1.5KE200CA, 1.5KE220CA) (+) Underwriters laboratory recognition for the classification of pr otectors (QVGQ2) under the UL standard for safety 497B and file number E136766 for both uni-directional and bi-directional devices ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) JEDEC TYPE NUMBER GENERAL SEMICONDUCTOR PART NUMBER BREAKDOWN VOLTAGE VBR AT IT (1) (V) TEST CURRENT IT (mA) STAND-OFF VOLTAGE VWM (V) MAXIMUM REVERSE LEAKAGE AT VWM ID (4) (µA) MAXIMUM PEAK PULSE CURRENT IPPM (2) (A) MAXIMUM CLAMPING VOLTAGE AT IPPM VC (V) MAXIMUM TEMP. COEFFICIENT OF VBR (%/°C) MIN. MAX.

Document Number: 91000 www.vishay.com Revision: 18-Jul-08 1 Disclaimer Legal Disclaimer Notice Vishay All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all li ability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permit ted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purcha se, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medi cal, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners.