3090150 CLARKE | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
Model : 25CN Part No : 3090150 OPERATING & MAINTENANCE INSTRUCTIONS 0303 WARNING Compressed air can be dangerous. Ensure that you are thoroughly familiar with all precautions relating to the use of compressors and compressed air supply. CLARKE GUARANTEE This CLARKE product is guaranteed against faulty manufacture for a period of 12 months from the date of purchase. Please keep your receipt as proof of purchase. This guarantee is invalid if the product is found to have been abused or tampered with in any way, or not used for the pur- pose for which it was intended. Faulty goods should be returned to their place of purchase, no product can be returned to us without prior permission. This guarantee does not affect your statutory rights. Please read these instructions carefully before operating the tool Thank you for purchasing this CLARKE Blow Gun Before using the device, please read this manual thoroughly and carefully follow all instructions given. This is for your own safety and that of others around you, and is also to help you achieve long and trouble free service from your new blow gun. This simple to operate trigger action blow gun can be used to blow away dust and wood shavings as well as metal filings and swarf. Take great care when using this appliance... DO NOT use high air pressure when cleaning dust from electrical or electronic components. Please note that the details and specifications contained herein are correct at the time of going to print. However CLARKE International reserve the right to change specifications at any time without prior notice.
A wide range of airline accessories is available from your nearest CLARKE dealer, for further information, contact your nearest dealer, or telephone CLARKE International Sales department on 01992 565300. PARTS & SERVICE TEL: 020 8988 7400 or e-mail as follows: PARTS: Parts@clarkeinternational.com SERVICE: Service@clarkeinternational.com Maintenance IMPORTANT Disconnect the gun from the air supply, and relieve any pressure in the gunand hose, before any disassembly. The only maintenance other than to replace worn or broken parts, is to keep the gun clean and lubricated. Occasionally clean the gun and lubricate all moving parts, especially the trigger stud. Inspect the gun and air hose for wear or damage periodically, and replace if necessary. DO NOT use damaged or leaking hoses. Specifications /G149ALWA YS wear a suitable approved breathing mask, to protect against inhalation of dust or fumes. /G149ALWA YS wear approved impact resistant safety goggles. Eye glasses are NOT safety glasses. /G149ALWA YS disconnect the gun from the air supply when it is not in use, and before any disassembly. /G149NEVER point gun towards people or animals. In the case of injury, seek expert medical advice immediately. /G149NEVER allow children to use or play with this appliance. SAFETY PRECAUTIONS For your personal safety and that of others around you. Follow these safety instructions carefully. Blow guns should only be connected to an airline precedded by a pre-set tamper- proof pressure regulator set at a reduced pressure from the normal 80 psi airline supply. If in any doubt, please contact your nearest Clarke service department. The air supply should be completely cllean and dry. Lubricators of any kind should not be used with blow guns. WARNING WARNING Compressed air can be dangerous. Ensure that you are thoroughly familiar with all precautions relating to the use of compressors and compressed air supply.