2315233-C

2315233-C ATGBICS

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 10

Technical content

ATGBICS® All rights reserved. EOE Ref: ATGBICS_2315233-C_V2 Page 1 of 10 Product Datasheet 2315233-C HUAWEI® Compatible 155Mb/s SFP Transceiver Hot Pluggable, Duplex LC, +3.3V, 1310nm, FP MMF 2km 0~70°C DDM

FEATURES

• Up to 155Mb/s Data Links
• Hot-Pluggable
• Duplex LC connector
• Up to 2 km on 50/125μm MMF
• 1310nm FP laser transmitter
• Single +3.3V Power Supply
• Low power dissipation <1W typically
• Commercial operating temperature range: 0°C to 70°C
• RoHS compliant and Lead Free

APPLICATIONS

• SONET OC-3/SDH STM-1
• Fast Ethernet
• Other Optical Links

DESCRIPTION

ATGBICS 2315233-C Transceiver is a high-performance, cost-effective module which have a duplex LC optics interface. Standard AC coupled CML for high-speed signal and LVTTL control and monitor signals. The receiver section uses a PIN receiver and the transmitter uses a 1310nm FP laser, up to 17dB link budge ensure this module SONET OC-3/SDH STM-1 2Km application.

ATGBICS® All rights reserved. EOE Ref: ATGBICS_2315233-C_V2 Page 2 of 10 Product Datasheet Absolute Maximum Ratings Parameter Symbol Min. Typical Max. Unit Storage Temperature TS -40 +85 °C Supply Voltage VCC -0.5 4 V Relative Humidity RH 0 85 % Recommended Operating Environment: Parameter Symbol Min. Typical Max. Unit Case operating Temperature Industrial TC -40 85 °C Extended -5 85 °C Commercial 0 +70 °C Supply Voltage VCC 3.135 3.465 V Supply Current Icc 300 mA Inrush Current Isurge Icc+30 mA Maximum Power Pmax 1 W

ATGBICS® All rights reserved. EOE Ref: ATGBICS_2315233-C_V2 Page 3 of 10 Product Datasheet Electrical Characteristics (TOP = -40 to 85°C, VCC = 3.135 to 3.465 Volts) Parameter Symbol Min. Typical Max. Unit Note Transmitter Section: Input differential impedance Rin 90 100 110 Single ended data input swing Vin PP 250 1200 mVp-p Transmit Disable Voltage VD Vcc – 1.3 Vcc V 2 Transmit Enable Voltage VEN Vee Vee+ 0.8 V Transmit Disable Assert Time Tdessert 10 us Receiver Section: Single ended data output swing Vout,pp 300 800 mv 3 Data output rise time tr 500 ps 4 Data output fall time tf 500 ps 4 LOS Fault Vlosfault Vcc – 0.5 VCC_host V 5 LOS Normal Vlos norm Vee Vee+0.5 V 5 Power Supply Rejection PSR 100 mVpp 6 Notes: 1. AC coupled. 2. Or open circuit. 3. Into 100 ohm differential termination. 4. 20 – 80 % 5. LOS is LVTTL. Logic 0 indicates normal operation; logic 1 indicates no signal detected. 6. All transceiver specifications are compliant with a power supply sinusoidal modulation of 20 Hz to 1.5MHz up to specified value applied through the power supply filtering network shown on page 23 of the Small Form-factor Pluggable (SFP) Transceiver Multi-Source Agreement (MSA), September 14, 2000.

ATGBICS® All rights reserved. EOE Ref: ATGBICS_2315233-C_V2 Page 4 of 10 Product Datasheet Optical Parameters (TOP = -40 to 85°C, VCC = 3.135 to 3.465 Volts) Parameter Symbol Min. Typical Max. Unit Note Transmitter Section: Center Wavelength λc 1260 1310 1360 nm Spectral Width σ 7.7 nm Optical Output Power Pout -15 -8 dBm 1 Optical Rise/Fall Time tr / tf 500 ps 2 Extinction Ratio ER 8.2 dB Generated Jitter (peak to peak) JTXp-p 0.07 UI 3 Generated Jitter (rms) JTXrms 0.007 UI 3 Eye Mask for Optical Output Compliant with G.957(class 1 laser safety) Receiver Section: Optical Input Wavelength λc 1260 1600 nm Receiver Overload Pol -8 dBm 4 RX Sensitivity Sen -32 dBm 4 RX_LOS Assert LOS A -45 dBm RX_LOS De-assert LOS D -33 dBm RX_LOS Hysteresis LOS H 0.5 dB General Specifications: Data Rate BR 155 Mb/s Bit Error Rate BER 10-12 Max. Supported Link Length on 50/125μm MMF@155Mb/s LMAX 2 km Total System Budget LB 17 dB Notes: 1. The optical power is launched into MMF. 2. 20-80%. 3. Jitter measurements taken using Agilent OMNIBERT 718 in accordance with GR-253. 4. Measured with PRBS 27-1 at 10-12 BER

ATGBICS® All rights reserved. EOE Ref: ATGBICS_2315233-C_V2 Page 5 of 10 Product Datasheet Pin Assignment Diagram of Host Board Connector Block Pin Numbers and Name

ATGBICS® All rights reserved. EOE Ref: ATGBICS_2315233-C_V2 Page 6 of 10 Product Datasheet Pin Function Definitions Pin No Name Function Plug Seq Notes

1 VeeT Transmitter Ground 1 1

2 TX Fault Transmitter Fault Indication 3

3 TX Disable Transmitter Disable 3 2

4 MOD-DEF2 Module Definition 2 3

5 MOD-DEF1 Module Definition 1 3 3

6 MOD-DEF0 Module Definition 0 3 3

7 Rate Select Not Connected 3 4

8 LOS Loss of Signal 3 5

9 VeeR Receiver Ground 1 1

10 VeeR Receiver Ground 1 1

11 VeeR Receiver Ground 1

12 RD- Inv. Received Data Out 3 6

13 RD+ Received Data Out 3 6

14 VeeR Receiver Ground 3 1

15 VccR Receiver Power 2 1

16 VccT Transmitter Power 2

17 VeeT Transmitter Ground 1

18 TD+ Transmit Data In 3 6

19 TD- Inv. Transmit In 3 6

20 VeeT Transmitter Ground 1

Notes: 1. Circuit ground is internally isolated from chassis ground. 2. Laser output disabled on TDIS >2.0V or open, enabled on TDIS <0.8V. MOD_DEF(0) pulls line low to indicate module is plugged in. 4. Rate select is not used 5. LOS is open collector output. Should be pulled up with 4.7k – 10 kohms on host board to a voltage between 2.0V and 3.6V. Logic 0 indicates normal operation; logic 1 indicates loss of signal. 6. AC Coupled

definitions, please refer to the SFF -8472, “Digital Diagnostic Monitoring Interface for Optical Transceivers”. The DDM parameters have been internally calibrated. Table 1. Digital Diagnostic Memory Map (Specific Data Field Descriptions)

ATGBICS® All rights reserved. EOE Ref: ATGBICS_2315233-C_V2 Page 8 of 10 Product Datasheet Table 2 - EEPROM Serial ID Memory Contents (A0h) Data Address Length (Byte) Name of Length Description and Contents Base ID Fields 0 1 Identifier Type of Serial transceiver (03h=SFP) 1 1 Reserved Extended identifier of type serial transceiver (04h) 2 1 Connector Code of optical connector type (07=LC) 3-10 8 Transceiver 11 1 Encoding NRZ(03h) 12 1 BR, Nominal Nominal baud rate, unit of 100Mbps 13-14 2 Reserved (0000h) 15 1 Length(9um) Link length supported for 9/125um fiber, units of 100m 16 1 Length(50um) Link length supported for 50/125um fiber, units of 10m 17 1 Length(62.5um) Link length supported for 62.5/125um fiber, units of 10m 18 1 Length(Copper) Link length supported for copper, units of meters 19 1 Reserved 20-35 16 Vendor Name SFP vendor name: ATGBICS 36 1 Reserved 37-39 3 Vendor OUI SFP transceiver vendor OUI ID 40-55 16 Vendor PN Part Number: “JP-1303-FL2DI” (ASCII) 56-59 4 Vendor rev Revision level for part number 60-62 3 Reserved 63 1 CCID Least significant byte of sum of data in address 0-62 Extended ID Fields 64-65 2 Option Indicates which optical SFP signals are implemented (001Ah = LOS, TX_FAULT, TX_DISABLE all supported) 66 1 BR, max Upper bit rate margin, units of % 67 1 BR, min Lower bit rate margin, units of % 68-83 16 Vendor SN Serial number (ASCII) 84-91 8 Date code ATGBICS Manufacturing date code 92-94 3 Reserved 95 1 CCEX Check code for the extended ID Fields (addresses 64 to 94) Vendor Specific ID Fields 96-127 32 Readable ATGBICS specific date, read only 128-255 128 Reserved Reserved for SFF-8079

ATGBICS® All rights reserved. EOE Ref: ATGBICS_2315233-C_V2 Page 9 of 10 Product Datasheet Regulatory Compliance The 2315233-C complies with international Electromagnetic Compatibility (EMC) and international safety requirements and standards (see details in Table following). Electrostatic Discharge (ESD) to the Electrical Pins MIL-STD-883E Method 3015.7 Class 1(>1000 V) Electrostatic Discharge (ESD) to the Duplex LC Receptacle IEC 61000-4-2 GR-1089-CORE Compatible with standards Electromagnetic Interference (EMI) FCC Part 15 Class B EN55022 Class B (CISPR 22B) VCCI Class B Compatible with standards Laser Eye Safety FDA 21CFR 1040.10 and 1040.11 EN60950, EN (IEC) 60825-1,2 Compatible with Class 1 laser product. Recommended Circuit VCCT Laser Driver 100Ω Amplifer EEPROM TX_Disable TX_Fault SFP Module 4K7 to10KΩ Z=50Ω Z=50Ω Z=50Ω RGND RX_LOS VCC(3.3V) 3X4K7 to10KΩ VCC(3.3V) 100Ω PECL PECL Host Board Z=50Ω MOD_DEF(0) MOD_DEF(1) MOD_DEF(2) 4K7 to10KΩ SFP Host Recommended Circuit

ATGBICS® All rights reserved. EOE Ref: ATGBICS_2315233-C_V2 Page 10 of Product Datasheet Mechanical Dimensions Mechanical Drawing