1881642 PHOENIX | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 7
Technical content
https://www.phoenixcontact.com/pi/products/1881642 02/04/2022 Page 1 / 7 Printed-circuit board connector - MCV 0,5/11-G-2,5 - 1881642 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) PCB headers, nominal cross section: 0.5 mm², color: green, nominal current: 4 A, rated voltage (III/2): 160 V, contact surface: Tin, type of contact: Male connector, number of potentials: 11, number of rows: 1, number of positions: 11, number of connections: 11, product range: MCV 0,5/..-G, pitch: 2.5 mm, mounting: Wave soldering, pin layout: Linear pinning, solder pin [P]: 3.5 mm, number of solder pins per potential: 1, plug- in system: MICRO COMBICON - FK-MC 0,5, Pin connector pattern alignment: Standard, Locking: without, mounting: without, type of packaging: packed in cardboard The figure shows a 10-position version of the product Your advantages Well-known mounting principle allows worldwide use Vertical connection enables multi-row arrangement on the PCB Key Commercial Data Packing unit 50 pc GTIN GTIN 4017918156886 Technical data Item properties Brief article description PCB header Connector system MICRO COMBICON - FK-MC 0,5 Type of contact Male connector Range of articles MCV 0,5/..-G Pitch 2.5 mm Number of positions 11 Mounting type Wave soldering Pin layout Linear pinning Locking without Number of rows 1 Number of connections 11 Number of potentials 11
https://www.phoenixcontact.com/pi/products/1881642 02/04/2022 Page 2 / 7 Printed-circuit board connector - MCV 0,5/11-G-2,5 - 1881642 Technical data Item properties Pin connector pattern alignment Standard Electrical parameters Nominal current 4 A Nom. voltage 160 V Rated voltage (III/3) 80 V Rated voltage (III/2) 160 V Rated voltage (II/2) 320 V Rated surge voltage (III/3) 1.5 kV Rated surge voltage (III/2) 2.5 kV Rated surge voltage (II/2) 2.5 kV Material data - contact Note WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/ JEDEC JESD 201 Contact material Cu alloy Surface characteristics Tin-plated Metal surface contact area (top layer) Tin (3 - 5 µm Sn) Metal surface contact area (middle layer) Nickel (1 - 3 µm Ni) Metal surface soldering area (top layer) Tin (3 - 5 µm Sn) Metal surface soldering area (middle layer) Nickel (1 - 3 µm Ni) Material data - housing Housing color green (6021) Insulating material PA Insulating material group I CTI according to IEC 60112 600 Flammability rating according to UL 94 V0 Glow wire flammability index GWFI according to EN 60695-2-12 850 Glow wire ignition temperature GWIT according to EN 60695-2-13 775 Temperature for the ball pressure test according to EN 60695-10-2 125 °C Flange specifications Type of locking without Dimensions for the product Caption Schematische Abbildung - weitere Details siehe Produktfamilienzeichnung im Download Center Length [ l ] 8.1 mm Width [ w ] 29.7 mm Height [ h ] 13.6 mm Pitch 2.5 mm Height (without solder pin) 10.1 mm Solder pin [P] 3.5 mm
https://www.phoenixcontact.com/pi/products/1881642 02/04/2022 Page 3 / 7 Printed-circuit board connector - MCV 0,5/11-G-2,5 - 1881642 Technical data Dimensions for the product Pin dimensions 0.8 x 0.8 mm Dimensions for PCB design Hole diameter 1.2 mm Packaging information Type of packaging packed in cardboard Pieces per package 50 Denomination packing units Pcs. Ambient conditions Ambient temperature (storage/transport) -40 °C ... 70 °C Relative humidity (storage/transport) 30 % ... 70 % Ambient temperature (assembly) -5 °C ... 100 °C Ambient temperature (operation) -40 °C ... 100 °C (dependent on the derating curve) Air clearances and creepage distances Clearances and creepage distances IEC 60664-1:2007-04 Specification IEC 60664-1:2007-04 Minimum clearance - inhomogeneous field (III/3) 0.8 mm Minimum clearance - inhomogeneous field (III/2) 1.5 mm Minimum clearance - inhomogeneous field (II/2) 1.5 mm Minimum creepage distance value (III/3) 1.7 mm Minimum creepage distance value (III/2) 0.8 mm Minimum creepage distance value (II/2) 1.6 mm Mechanical tests (A) Test specification IEC 61984 Insertion strength per pos. approx. 7 N Withdraw strength per pos. approx. 6 N Polarization when inserted requirement >20 N Test passed Contact holder in insert requirements >20 N Test passed Durability tests (B) Specification IEC 60512-9-1:2010-03 Contact resistance R1 2 mΩ Insertion/withdrawal cycles 25 Contact resistance R2 2.2 mΩ Impulse withstand voltage at sea level 2.95 kV Insulation resistance, neighboring positions > 5 MΩ Thermal tests (C) Specification IEC 60512-5-1:2002-02 Number of positions 12 Upper limiting temperature requirements <100 °C Test passed
https://www.phoenixcontact.com/pi/products/1881642 02/04/2022 Page 4 / 7 Printed-circuit board connector - MCV 0,5/11-G-2,5 - 1881642 Technical data Climatic tests (D) Specification ISO 6988:1985-02 Cold stress -40 °C/2 h Thermal stress 100 °C/168 h Corrosive stress 0.2 dm SO2 on 300 dm /40 °C/1 cycle Impulse withstand voltage at sea level 2.95 kV Power-frequency withstand voltage 1.39 kV Environmental and durability tests (E) Specification IEC 61984:2008-10 Result, degree of protection, IP code Finger safety with IP20 test finger Vibration test Specification IEC 60068-2-6:2007-12 Frequency 10 - 150 - 10 Hz Sweep speed 1 octave/min Amplitude 0.35 mm (10 - 60.1 Hz) Acceleration 5g (60.1 - 150 Hz) Test duration per axis 2.5 h Standards and Regulations Connection in acc. with standard EN-VDE Environmental Product Compliance China RoHS Environmentally friendly use period: unlimited = EFUP-e No hazardous substances above threshold values Drawings Drilling diagram a 2,2 1,2 2,5 Diagram 01 02 03 04 05 06 07 08 09 0 100 110 = 2-pos. = 5-pos. = 12-pos. Ambient temperature [°C] Current strength [A]
https://www.phoenixcontact.com/pi/products/1881642 02/04/2022 Page 5 / 7 Printed-circuit board connector - MCV 0,5/11-G-2,5 - 1881642 Dimensional drawing 3,5 10,1 23,5 11,75 8,1 3,9 a 2,2 a+4,4 2,5 Classifications eCl@ss eCl@ss 10.0.1 27440402 eCl@ss 11.0 27460201 eCl@ss 4.0 27260700 eCl@ss 4.1 27260700 eCl@ss 5.0 27260700 eCl@ss 5.1 27260700 eCl@ss 6.0 27260700 eCl@ss 7.0 27440402 eCl@ss 9.0 27440402 ETIM ETIM 3.0 EC001121 ETIM 4.0 EC002637 ETIM 6.0 EC002637 ETIM 7.0 EC002637 UNSPSC UNSPSC 6.01 30211810 UNSPSC 7.0901 39121409 UNSPSC 11 39121409 UNSPSC 12.01 39121409 UNSPSC 13.2 39121409 UNSPSC 18.0 39121409 UNSPSC 19.0 39121409 UNSPSC 20.0 39121409 UNSPSC 21.0 39121409 Approvals Approvals
https://www.phoenixcontact.com/pi/products/1881642 02/04/2022 Page 6 / 7 Printed-circuit board connector - MCV 0,5/11-G-2,5 - 1881642 Approvals Approvals VDE Gutachten mit Fertigungsüberwachung / CCA / IECEE CB Scheme / EAC / cULus Recognized Ex Approvals Approval details VDE Gutachten mit Fertigungsüberwachung http://www2.vde.com/de/Institut/Online-Service/ VDE-gepruefteProdukte/Seiten/Online-Suche.aspx 40013394 Nominal voltage UN 80 V Nominal current IN 4 A CCA CCA/ DE1 34250 Nominal voltage UN 80 V Nominal current IN 4 A IECEE CB Scheme http://www.iecee.org/ DE1-56068-B1B2 Nominal voltage UN 80 V Nominal current IN 4 A EAC B.01687 cULus Recognized http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm E60425-19930913 B Nominal voltage UN 125 V Nominal current IN 4 A Accessories Accessories Coding element
https://www.phoenixcontact.com/pi/products/1881642 02/04/2022 Page 7 / 7 Printed-circuit board connector - MCV 0,5/11-G-2,5 - 1881642 Accessories Coding profile - CP-MC 0,5 - 1881435 Coding profile, is inserted into the groove in the header, red insulating material Labeled terminal marker Marker card - SK 2,54/2,8:FORTL.ZAHLEN - 0804853 type: adhesive, for terminal block width: 2.54 mm, lettering field size: 2.54 x 2.8 mm Additional products Printed-circuit board connector - FK-MC 0,5/11-ST-2,5 - 1881419 PCB connector, nominal cross section: 0.5 mm², color: green, nominal current: 4 A, rated voltage (III/2): 160 V, contact surface: Tin, type of contact: Female connector, number of potentials: 11, number of rows: 1, number of positions: 11, number of connections: 11, product range: FK-MC 0,5/..-ST, pitch: 2.5 mm, connection method: Push- in spring connection, conductor/PCB connection direction: 0 °, number of solder pins per potential: 1, plug-in system: MICRO COMBICON - FK-MC 0,5, Locking: without, mounting: without, type of packaging: packed in cardboard Phoenix Contact 2022 © - all rights reserved http://www.phoenixcontact.com PHOENIX CONTACT GmbH & Co. KG Flachsmarktstr. 8
32825 Blomberg
Tel. +49 5235 300 Fax +49 5235 3 41200 http://www.phoenixcontact.com