1852820 PHOENIX | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 8

Technical content

Please be informed that the data shown in this PDF document is generated from our online catalog. Please find the complete data in the user documentation. Our general terms of use for downloads are valid. Contact insert, Range of articles: VARIOCON, housing material: Polyamide, color: light grey, number of positions: 8, rated voltage: 160, rated current: 10 A, Connection method: Screw connection, Contact connection type: Socket, Connectors may only be connected/disconnected when under no load. Your advantages Proven COMBICON technology• Universal connection Can be keyed to prevent incorrect connection Commercial data Item number 1852820 Packing unit 50 pc Minimum order quantity 1 pc Sales key AB01 Product key ABLACA Catalog page Page 33 (C-2-2013) GTIN 4017918127152 Weight per piece (including packing) 7.319 g Weight per piece (excluding packing) 6.7 g Customs tariff number 85366990 Country of origin PL VC-TFS 8 - Contact insert 1852820 https://www.phoenixcontact.com/us/products/1852820 Oct 30, 2024, 4:38 AM Page 1 (8)

General Connectors may only be connected/disconnected when under no load. Safety note WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.

  • WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible.
  • WARNING: Only electrically qualified personnel may install and operate the product. They must observe the following safety notes. The qualified personnel must be familiar with the basics of electrical engineering. They must be able to recognize and prevent danger. The relevant symbol on the packaging indicates that only personnel familiar with electrical engineering are allowed to install and operate the product.
  • The products are suitable for applications in plant, controller, and electrical device engineering.
  • When operating the connectors in outdoor applications, they must be separately protected against environmental influences.
  • Assembled products may not be manipulated or improperly opened.
  • Only use mating connectors that are specified in the technical data of the standards listed (e.g. the ones listed in the product accessories online at phoenixcontact.com/products).
  • When using the product in direct connection with third-party manufacturers, the user is responsible.
  • For operating voltages > 50 V AC, conductive connector housings must be grounded
  • Ensure that the protective or functional ground has been properly connected. are applicable when combining several circuits in a cable and/or connector
  • Observe the corresponding technical data. You will find information: o On the product o On the packing label o In the supplied documentation o Online at phoenixcontact.com/products under the product
  • Only use tools recommended by Phoenix Contact
  • The installation notes/Design In documents online on the download page at phoenixcontact.com/products must be observed for this product.
  • Use a protective cap to protect connectors that are not in use. The suitable accessories are available online in the accessory section of the product at phoenixcontact.com/products
  • Operate the connector only when it is fully plugged in. Safety note VC-TFS 8 - Contact insert 1852820 https://www.phoenixcontact.com/us/products/1852820 Oct 30, 2024, 4:38 AM Page 2 (8)
  • Ensure that when laying the cable, the tensile load on the connectors does not exceed the upper limit specified in the standards.
  • Observe the minimum bending radius of the cable. Lay the cable without twisting it.
  • The connector warms up in normal operation. Depending on the ambient conditions, the surface of the connector can continue to warm up. In this case, the user is responsible for posting warnings (e.g. DIN EN ISO 13732-1:2008-12). Product properties Product type Contact insert Product family VARIOCON Series VC-M Number of positions 8 Number of module slots 1 Data management status Article revision 11 Insulation characteristics Degree of pollution 3 Electrical properties Rated voltage (II/2) 250 V Rated voltage (III/2) 160 V

160 VRated voltage (III/3)

Nominal voltage ATD 160 (III/3.00) Rated surge voltage 2.5 kV Rated surge voltage (III/3) 2.5 kV Rated surge voltage 2.5 kV 10 A 10 A Rated current 10 A Connection data Connection method Screw connection Dimensions Dimensional drawing Width 15 mm VC-TFS 8 - Contact insert 1852820 https://www.phoenixcontact.com/us/products/1852820 Oct 30, 2024, 4:38 AM Page 3 (8)

Height 27.5 mm Length 21.8 mm Material specifications Color light grey Color of the housing part gray Material Polyamide Flammability rating according to UL 94 V0 Insulating material group I / CTI 600 Housing material Polyamide Contact material CuZn Contact surface material tin-plated Contact carrier material PA Cable/line Stripping length of the individual wire 7 mm Mechanical properties Mechanical data Insertion/withdrawal cycles ≥ 100 Insertion force 4 N (per position) Environmental and real-life conditions Ambient conditions Ambient temperature (operation) -40 °C ... 100 °C VC-TFS 8 - Contact insert 1852820 https://www.phoenixcontact.com/us/products/1852820 Oct 30, 2024, 4:38 AM Page 4 (8)

0 10 20 30 40 50 60 70 80 90 100 110 120 I [A]  [°C] Dimensional drawing 21,7 15 3,58,3 26,6 VC-TFS 8 - Contact insert 1852820 https://www.phoenixcontact.com/us/products/1852820 Oct 30, 2024, 4:38 AM Page 5 (8)

To download certificates, visit the product detail page: https://www.phoenixcontact.com/us/products/1852820  cUL Recognized Approval ID: E118976 Nominal voltage UN Nominal current IN Cross section AWG Cross section mm2

250 V 8 A 30 - 14 -

 UL Recognized Approval ID: E118976 Nominal voltage UN Nominal current IN Cross section AWG Cross section mm2  UL Recognized Approval ID: E221474-20240615 Nominal voltage UN Nominal current IN Cross section AWG Cross section mm2

250 V 8 A - -

 cUL Recognized Approval ID: E221474-20240615 Nominal voltage UN Nominal current IN Cross section AWG Cross section mm2 https://www.phoenixcontact.com/us/products/1852820 Oct 30, 2024, 4:38 AM Page 6 (8)

ECLASS-11.0 27440223 ECLASS-12.0 27440223 ECLASS-13.0 27440223 ETIM ETIM 9.0 EC003557 UNSPSC UNSPSC 21.0 39121400 VC-TFS 8 - Contact insert 1852820 https://www.phoenixcontact.com/us/products/1852820 Oct 30, 2024, 4:38 AM Page 7 (8)

Environmental product compliance EU RoHS Fulfills EU RoHS substance requirements Yes, No exemptions China RoHS EFUP-EEnvironment friendly use period (EFUP) No hazardous substances above the limits EU REACH SVHC REACH candidate substance (CAS No.) No substance above 0.1 wt% EF3.0 Climate Change CO2e kg 0.07 kg CO2e Phoenix Contact 2024 © - all rights reserved https://www.phoenixcontact.com Phoenix Contact USA

586 Fulling Mill Road

Middletown, PA 17057, United States (+717) 944-1300 info@phoenixcon.com VC-TFS 8 - Contact insert 1852820 https://www.phoenixcontact.com/us/products/1852820 Oct 30, 2024, 4:38 AM Page 8 (8)