1622231 PHOENIX | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 11

Technical content

https://www.phoenixcontact.com/pi/products/1622231 09/11/2020 Page 1 / 11 Cable plug in molded plastic - K-8E-OE/5,0-H00/M23FK-C5-S - 1622231 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Cable plug in molded plastic, length: 5 m, color of outer sheath: orange RAL 2003 Your advantages Transmission of signals, data, and power in just a single connector CAT5 data interface for up to 100 Mbps Customer-specific assemblies and cable lengths can be supplied Simple and safe: 100% electrically tested and assembled ready for use Designs with pre-assembled cables on one or both sides Easy connection: angled design with configurable cable outlet direction Key Commercial Data Packing unit 1 pc Minimum order quantity 2 pc GTIN GTIN 4055626069951 Technical data Conductor length 5 m Nominal current 26 A Standards and Regulations Safety note WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.

  • WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible.
  • WARNING: Only electrically qualified personnel may install and operate the product. They must observe the following safety notes.

https://www.phoenixcontact.com/pi/products/1622231 09/11/2020 Page 2 / 11 Cable plug in molded plastic - K-8E-OE/5,0-H00/M23FK-C5-S - 1622231 Technical data Standards and Regulations The qualified personnel must be familiar with the basics of electrical engineering. They must be able to recognize and prevent danger. The relevant symbol on the packaging indicates that only personnel familiar with electrical engineering are allowed to install and operate the product.

  • The products are suitable for applications in plant, controller, and electrical device engineering.
  • When operating the connectors in outdoor applications, they must be separately protected against environmental influences.
  • Assembled products may not be manipulated or improperly opened.
  • Only use mating connectors that are specified in the technical data of the standards listed (e.g. the ones listed in the product accessories online at phoenixcontact.com/products).
  • When using the product in direct connection with third-party manufacturers, the user is responsible.
  • For operating voltages > 50 V AC, conductive connector housings must be grounded
  • Ensure that the protective or functional ground has been properly connected. applicable when combining several circuits in a cable and/or connector
  • Only use tools recommended by Phoenix Contact
  • The installation notes/Design In documents online on the download page at phoenixcontact.com/products must be observed for this product.
  • Operate the connector only when it is fully plugged in and interlocked.
  • Ensure that when laying the cable, the tensile load on the connectors does not exceed the upper limit specified in the standards.
  • Observe the minimum bending radius of the cable. Lay the cable without twisting it.
  • The connector warms up in normal operation. Depending on the ambient conditions, the surface of the connector can continue to warm up. In this case, the user is responsible for posting warnings (e.g. DIN EN ISO 13732-1:2008-12). Connector specifications Type Angled, can be turned, plastic-coated Housing material PUR Thread type M23 Locking type SPEEDCON locking Degree of protection IP67, when in locked state IP68, when in locked state Number of positions 4+4+4+PE Direction of rotation Standard Type of contact Socket Insertion/withdrawal cycles 100 Max. current 30 A Voltage 630 V AC Overvoltage category III

https://www.phoenixcontact.com/pi/products/1622231 09/11/2020 Page 3 / 11 Cable plug in molded plastic - K-8E-OE/5,0-H00/M23FK-C5-S - 1622231 Technical data Connector specifications Degree of pollution 3 Rated surge voltage 6 kV Cable specifications Type of cable HDSLC11Y-J Signal type CAT5 Transmission speed 100 Mbps (Data interface) Shielded yes Cable structure (5x 2.5 + 2x (2x 0.5) + (4x 0.34)C) C External cable diameter 15.5 mm ±0.5 mm Outer sheath, material PUR Material wire insulation TPE External sheath, color orange RAL 2003 Single wire, color Black 1, black 2, black 3, black 4, green/yellow Power wires + PE brown, violet, black 5, green Signal wires blue, yellow, white, orange Data wires Nominal voltage, cable 1000 V (300 V signal) Test voltage 4 kV (1.5 kV signal) Rated current 26 A (Power, according to DIN VDE 0298-4 tab. 11/5) 8 A (Signal, according to DIN VDE 0298-4 tab. 11/5) 3.6 A (Data, according to DIN VDE 0298-4 tab. 11/5) Smallest bending radius, fixed installation 73 mm Smallest bending radius, movable installation 148 mm Number of bending cycles 1000000 Traversing path 6 m Acceleration 30 m/s² Ambient temperature for fixed installation -40 °C ... 80 °C Ambient temperature for flexible installation -30 °C ... 60 °C UL AWM style 20234 / 10492 (80°C/1000 V) Special properties Flexible cable conduit capable Flame resistance IEC 60332-1-2 Halogen-free According to EN 50267-2-1 Resistance to oil EN 60811-2-1 Environmental Product Compliance REACh SVHC Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 50 years For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings

https://www.phoenixcontact.com/pi/products/1622231 09/11/2020 Page 4 / 11 Cable plug in molded plastic - K-8E-OE/5,0-H00/M23FK-C5-S - 1622231 Schematic diagram Cable outlet direction

https://www.phoenixcontact.com/pi/products/1622231 09/11/2020 Page 5 / 11 Cable plug in molded plastic - K-8E-OE/5,0-H00/M23FK-C5-S - 1622231 Schematic diagram Connector pin assignment

https://www.phoenixcontact.com/pi/products/1622231 09/11/2020 Page 6 / 11 Cable plug in molded plastic - K-8E-OE/5,0-H00/M23FK-C5-S - 1622231 Dimensional drawing Pin version: dimension A = ~ 0.3 mm, socket version: dimension A = 0 mm

https://www.phoenixcontact.com/pi/products/1622231 09/11/2020 Page 7 / 11 Cable plug in molded plastic - K-8E-OE/5,0-H00/M23FK-C5-S - 1622231 Circuit diagram Contact assignment of M23 plugs/sockets

https://www.phoenixcontact.com/pi/products/1622231 09/11/2020 Page 8 / 11 Cable plug in molded plastic - K-8E-OE/5,0-H00/M23FK-C5-S - 1622231 Cable cross section Classifications eCl@ss eCl@ss 10.0.1 27060311 eCl@ss 5.1 27060300 eCl@ss 6.0 27279200 eCl@ss 7.0 27279218 eCl@ss 8.0 27279218 eCl@ss 9.0 27060311 ETIM ETIM 4.0 EC001855 ETIM 5.0 EC001855 ETIM 6.0 EC001855 ETIM 7.0 EC001855

https://www.phoenixcontact.com/pi/products/1622231 09/11/2020 Page 9 / 11 Cable plug in molded plastic - K-8E-OE/5,0-H00/M23FK-C5-S - 1622231 Classifications UNSPSC UNSPSC 13.2 31251501 UNSPSC 19.0 31251501 UNSPSC 20.0 31251501 UNSPSC 21.0 31251501 Approvals Approvals Approvals UL Listed / cUL Listed / EAC / cULus Listed Ex Approvals Approval details UL Listed http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm E468743-20150929 Nominal voltage UN 600 V Nominal current IN 16 A cUL Listed http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm E468743-20150929 Nominal voltage UN 600 V Nominal current IN 16 A EAC B.00286/19 cULus Listed Accessories Accessories

https://www.phoenixcontact.com/pi/products/1622231 09/11/2020 Page 10 / 11 Cable plug in molded plastic - K-8E-OE/5,0-H00/M23FK-C5-S - 1622231 Accessories Conductor marking Insert label - PABA WH/23 - 1013779 Insert label, Strip, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, mounting type: thread on, cable diameter range: 1.5 ... 35 mm, lettering field size: 23 x 4 mm, Number of individual labels: 20 Insert label - PABA YE/23 - 1013782 Insert label, Strip, yellow, unlabeled, can be labeled with: CMS-P1-PLOTTER, mounting type: thread on, cable diameter range: 1.5 ... 35 mm, lettering field size: 23 x 4 mm, Number of individual labels: 20 Marker carrier cable Conductor marker carrier - PATG 6/23 - 0808037 Conductor marker carrier, transparent, unlabeled, mounting type: slide-on, cable diameter range: 14 ... 22 mm, lettering field size: 23 x 4 mm Protective cover Metal protective cap - SH-Z2300 - 1622141 Metal protection cap with steel wire, for M23 hybrid connectors with knurled nut Metal protective cap - SH-Z0077 - 1627226 Metal protection cap with steel wire and loop, for M23 power and hybrid connectors with knurled nut for fastening to the cable

https://www.phoenixcontact.com/pi/products/1622231 09/11/2020 Page 11 / 11 Phoenix Contact 2020 © - all rights reserved http://www.phoenixcontact.com PHOENIX CONTACT GmbH & Co. KG Flachsmarktstr. 8

32825 Blomberg

Tel. +49 5235 300 Fax +49 5235 3 41200 http://www.phoenixcontact.com