3402235 CLARKE | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 8
Technical content
ORIGINAL INSTRUCTIONS GC0718 ISS1 12LTR TROLLEY HAND SPRAYER MODEL:12LST PART NO: 3402235
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com INTRODUCTION Thank you for purchasing this CLARKE Sprayer, designed only for use with insecticides or other water-based products. Before attempting to use this product, please read this manual thoroughly and follow the instructions carefully. In doing so you will ensure the safety of yourself and that of others around you, and you can look forward to your purchase giving you long and satisfactory service. GUARANTEE This product is guaranteed against faulty manufacture for a period of 12 months from the date of purchase. Please keep your receipt which will be required as proof of purchase. This guarantee is invalid if the product is found to have been abused or tampered with in any way, or not used for the purpose for which it was intended. Faulty goods should be returned to their place of purchase, no product can be returned to us without prior permission. This guarantee does not effect your statutory rights. GENERAL SAFETY PRECAUTIONS 1. Never use this sprayer to store or spray flammable solvent-based chemicals. 2. Empty the contents if the sprayer is not to be used for long periods. 3. If insecticide is being sprayed, always wear a protective mask, safety glasses, footwear, overalls and gloves to protect the skin and face. Never spray chemical products facing into the wind. 4. Never spray pesticide towards other people, animals or foodstuffs. 5. Never use the sprayer for handling hot liquids and avoid operating in excessively hot environments. 6. Always comply with any applicable insecticide manufacturers safety instructions/directives before use. 7. Stop using the sprayer if the contai ner or hose is found to be damaged. 8. Always ensure all hose and lance co nnections are tight and leak-free.
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com SPECIFICATION Please note that the details and specifications contained herein, are correct at the time of going to print. However, CLARKE International reserve the right to change specifications at any time without prior notice. ASSEMBLY 1. Insert the pulling handle into the two holes on both sides of the tank and adjust to the required height, Tighten the locknut on each side to secure the handle. 2. Push the lance into the spray gun assembly and secure with the screw cap. 3. Attach the nozzle to the other end of the lance and secure with the screw cap. 4. Do not over tighten at either end, leaving a small gap between the screw cap and nozzle or spray gun. Overall Size 630 x 600 x 700 mm Weight 3.8 kg Rated Volume 12 Litres Pressure 3 bar Hose Length 2.5 m Flow rate 0.32 - 0.36 L/min (2 bar)
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com OPERATION 1. Unscrew the handle and pump assembly in order to fill the container with the desired liquid. 2. Screw the pump and handle assembly back on firmly. 3. Release the carrying lugs from the pump body by twisting the handle anticlockwise. 4. Pressurise the container by pumping the handle. 5. Squeeze the trigger to begin spraying. When the spray weakens, pump the handle to re- pressurise the container. 6. Push the trigger forward to lock in position & maintain a constant spray without needing to hold the trigger. Slide the trigger back to release. 7. Adjust the width of the spray by twisting the tip of the nozzle. 8. Pump the operating handle when necessary to maintain pressure.
- If leaks or poor delivery occurs, check the hose connections. 9. Push the pump handle downward and twist left or right to engage the carrying lugs in the cap when lifting the unit. 10. When not in use, clip the spray lance to the side of the pulling handle. 11. If a hissing sound is heard from the relief valve, the valve has reached its operating limit and is venting to prevent damage to the sprayer. 12. At the end of spraying, relieve tank air pressure by unscrewing the relief valve.
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com AFTER USE After use, the sprayer should be flushed thoroughly with clean water to avoid the possibility of blockages from product residue, or any cross-contamination between different products. If not used for long periods or used continuously for several days, add a light smear of vaseline to the sealing washers and moving parts to reduce wear and assist free movement. Always release any pressure before storage. FAULTFINDING Symptom Cause Remedy Poor delivery and leaking lance. Loose connections or damaged connecting o-rings. Inspect condition of connecting o-rings & replace if necessary. Extra high pumping pressure. Spray head is blocked. Poor lubrication of piston o-ring. Extra high pressure in tank. Clean out the spray head. Remove piston and apply vaseline to piston o-ring. Check the relief valve for possible jamming of the spring & piston. Very low pumping pressure. Piston o-ring is worn or damaged. Replace piston o-ring. Sprayer only discharges air with- out water. The suction hose in the tank may have come off. Unscrew the hose connector from the tank. Locate the loose suction hose inside the tank and re- fit to the connector assem- bly, tightening securely.
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com COMPONENT PARTS
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com COMPONENT PARTS No Description No Description 1T a n k 2 8 G a s k e t
2 Axle 29 Outlet coupling
3 Circlip 30 Filter screen
4W a s h e r 3 1 S u c t i o n h o s e