1238771 PHOENIX | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 10

Technical content

Please be informed that the data shown in this PDF document is generated from our online catalog. Please find the complete data in the user documentation. Our general terms of use for downloads are valid. Device connector front mounting, Universal, 4-position, Socket, straight, M12-Standard, coding: A, on free cable end, Front mounting, M20 x 1,5, Individual wires, cable length: 0.5 m, 0.34 mm2, TPE litz wire, Item is lead-free in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) Your advantages Preassembled with litz wires for immediate use• Customer-specific assemblies and litz wire lengths available Sealed on the litz wire side for optimum leak-tightness For high transmission safety: shield connection to the housing with optional EMC nut Commercial data Item number 1238771 Packing unit 1 pc Minimum order quantity 1 pc Sales key AB24 Product key ABQCFC GTIN 4063151387785 Weight per piece (including packing) 35.5 g Weight per piece (excluding packing) 35.5 g Customs tariff number 85444290 Country of origin DE SACC-E-M12FS-4CON-M20/0,5X - Device connector front mounting 1238771 https://www.phoenixcontact.com/us/products/1238771 Sep 10, 2024, 4:25 AM Page 1 (10)

Notes on operation The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. Safety note WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.

  • WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible.
  • WARNING: Only electrically qualified personnel may install and operate the product. They must observe the following safety notes. The qualified personnel must be familiar with the basics of electrical engineering. They must be able to recognize and prevent danger. The relevant symbol on the packaging indicates that only personnel familiar with electrical engineering are allowed to install and operate the product.
  • The products are suitable for applications in plant, controller, and electrical device engineering.
  • When operating the connectors in outdoor applications, they must be separately protected against environmental influences.
  • Assembled products may not be manipulated or improperly opened.
  • Only use mating connectors that are specified in the technical data of the standards listed (e.g. the ones listed in the product accessories online at phoenixcontact.com/products).
  • When using the product in direct connection with third-party manufacturers, the user is responsible.
  • For operating voltages > 50 V AC, conductive connector housings must be grounded
  • Ensure that when laying the cable, the tensile load on the connectors does not exceed the upper limit specified in the standards.
  • Observe the corresponding technical data. You will find information: o On the product o On the packing label o In the supplied documentation o Online at phoenixcontact.com/products under the product
  • Only use tools recommended by Phoenix Contact
  • Use a protective cap to protect connectors that are not in use. The suitable accessories are available online in the accessory section of the product at phoenixcontact.com/products Safety note SACC-E-M12FS-4CON-M20/0,5X - Device connector front mounting 1238771 https://www.phoenixcontact.com/us/products/1238771 Sep 10, 2024, 4:25 AM Page 2 (10)
  • Ensure that the protective or functional ground has been properly connected. are applicable when combining several circuits in a cable and/or connector
  • The connector warms up in normal operation. Depending on the ambient conditions, the surface of the connector can continue to warm up. In this case, the user is responsible for posting warnings (e.g. DIN EN ISO 13732-1:2008-12). Mounting Mounting type Front mounting M20 x 1,5 Product properties Product type Circular connectors (device side) Application Signal Sensor type Universal Number of positions 4 No. of cable outlets 1 Shielded no Coding A Thread type M12 Data management status Article revision 04 Insulation characteristics Overvoltage category II Degree of pollution 3 Material specifications Flammability rating according to UL 94 V0 Seal material NBR Contact material CuZn Contact surface material Au Contact carrier material PA 6.6 Material for screw connection CuZn alloy, nickel-plated Conductor material Tin-plated Cu litz wires Electrical properties Rated surge voltage 2.5 kV Contact resistance ≤ 3 mΩ Insulation resistance ≥ 100 MΩ

250 V (AC)Nominal voltage UN

250 V (DC)

SACC-E-M12FS-4CON-M20/0,5X - Device connector front mounting 1238771 https://www.phoenixcontact.com/us/products/1238771 Sep 10, 2024, 4:25 AM Page 3 (10)

Transmission medium Copper Max. conductor resistance 57.6 mΩ/m Connection data Conductor connection Connection method Individual wires Contact connection type Socket Conductor cross section 0.34 mm² Tightening torque 3 Nm ... 4 Nm (Installation-side) Mechanical properties Mechanical data Insertion/withdrawal cycles > 100 Connector Connection 1 Head design Socket Head cable outlet straight Head thread type M12 Head locking type Standard Coding A Connection 2 Head design free cable end Cable/line Cable length 0.5 m Cable type TPE litz wire Signal type/category Universal Wire diameter incl. insulation 1.2 mm ±0.07 mm Single wire, color brown, white, blue, black Cable cross section 0.34 mm² Conductor material Tin-plated Cu litz wires Conductor structure signal line 7x 0.25 mm AWG signal line 22 Material wire insulation TPE Thickness, insulation 0.21 mm (Core insulation) Nominal voltage, cable 300 V Test voltage, cable 2000 V AC Cable resistance ≤ 57.6 mΩ/m Cable insulation resistance ≥ 20 MΩ*km -40 °C ... 85 °C (cable, fixed installation)Ambient temperature (operation) SACC-E-M12FS-4CON-M20/0,5X - Device connector front mounting 1238771 https://www.phoenixcontact.com/us/products/1238771 Sep 10, 2024, 4:25 AM Page 4 (10)

-25 °C ... 85 °C (Cable, flexible installation) Environmental and real-life conditions Ambient conditions IP67 IP69K Degree of protection IP67 -25 °C ... 85 °C (Plug / socket) -40 °C ... 85 °C (without mechanical actuation) -25 °C ... 85 °C (Cable, flexible installation) Ambient temperature (operation) -40 °C ... 85 °C (cable, fixed installation) Standards and regulations M12 Standard designation M12 connector Standards/specifications IEC 61076-2-101 SACC-E-M12FS-4CON-M20/0,5X - Device connector front mounting 1238771 https://www.phoenixcontact.com/us/products/1238771 Sep 10, 2024, 4:25 AM Page 5 (10)

SACC-E-M12FS-4CON-M20/0,5X - Device connector front mounting 1238771 https://www.phoenixcontact.com/us/products/1238771 Sep 10, 2024, 4:25 AM Page 6 (10)

Pin assignment M12 socket, 4-pos., A-coded, view female side Diagram 0 10 20 30 40 50 60 70 80 90 100 110 120 130 I [A] [°C] = 4x0,34mm 2 1 I = current strength, T = ambient temperature SACC-E-M12FS-4CON-M20/0,5X - Device connector front mounting 1238771 https://www.phoenixcontact.com/us/products/1238771 Sep 10, 2024, 4:25 AM Page 7 (10)

To download certificates, visit the product detail page: https://www.phoenixcontact.com/us/products/1238771  cULus Recognized Approval ID: E221474-20140616 Nominal voltage UN Nominal current IN Cross section AWG Cross section mm2

250 V 4 A 22 - 20 -

 cUL Recognized Approval ID: E118976-20100522 Nominal voltage UN Nominal current IN Cross section AWG Cross section mm2

250 V 4 A 22 - 22 -

 UL Recognized Approval ID: E118976-20100522 Nominal voltage UN Nominal current IN Cross section AWG Cross section mm2 SACC-E-M12FS-4CON-M20/0,5X - Device connector front mounting 1238771 https://www.phoenixcontact.com/us/products/1238771 Sep 10, 2024, 4:25 AM Page 8 (10)

ECLASS-11.0 27060308 ECLASS-12.0 27060308 ECLASS-13.0 27060308 ETIM ETIM 9.0 EC001262 SACC-E-M12FS-4CON-M20/0,5X - Device connector front mounting 1238771 https://www.phoenixcontact.com/us/products/1238771 Sep 10, 2024, 4:25 AM Page 9 (10)

Environmental product compliance EU RoHS Fulfills EU RoHS substance requirements Yes, No exemptions China RoHS EFUP-EEnvironment friendly use period (EFUP) No hazardous substances above the limits EU REACH SVHC REACH candidate substance (CAS No.) No substance above 0.1 wt% Phoenix Contact 2024 © - all rights reserved https://www.phoenixcontact.com Phoenix Contact USA

586 Fulling Mill Road

Middletown, PA 17057, United States (+717) 944-1300 info@phoenixcon.com SACC-E-M12FS-4CON-M20/0,5X - Device connector front mounting 1238771 https://www.phoenixcontact.com/us/products/1238771 Sep 10, 2024, 4:25 AM Page 10 (10)